Synthesis of Small‐Sized,Porous, and Low‐Toxic Magnetite Nanoparticles by Thin POSS Silica Coating

In this communication, we report the synthesis of small‐sized (<10 nm), water‐soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS‐coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51–53 emu g^?1) comparable to silica‐coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF‐7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.     

Results from Super-Kamiokande and K2K

Results from Super-Kamiokande-I’s entire 1496 live days of solar neutrino data are presented, including the absolute flux, energy spectrum, zenith angle (day/night) and seasonal variation. The possibility of MSW and vacuum oscillations is discussed in light of these results. Results from the first 1289 days of Super-K-I’s atmospheric neutrino analysis are also presented, including the evidence for ν_μ →ν _τ oscillations, against ν_μ → ν_sterile oscillations, and the current limits on proton decay. Finally, results based on 56 × 10¹⁹ protons on target are given for the K2K long-baseline neutrino oscillation experiment.     

A two-step stimulus-response cell-SELEX method to generate a DNA aptamer to recognize inflamed human aortic endothelial cells as a potential in vivo molecular probe for atherosclerosis plaque detection

Aptamers are single-stranded oligonucleotides that are capable of binding wide classes of targets with high affinity and specificity. Their unique three-dimensional structures present numerous possibilities for recognizing virtually any class of target molecules, making them a promising alternative to antibodies used as molecular probes in biomedical analysis and clinical diagnosis. In recent years, cell-systematic evolution of ligands by exponential enrichment (SELEX) has been used extensively to select aptamers for various cell targets. However, aptamers that have evolved from cell-SELEX to distinguish the “stimulus-response cell” have not previously been reported. Moreover, a number of cumbersome and time-consuming steps involved in conventional cell-SELEX reduce the efficiency and efficacy of the aptamer selection. Here, we report a “two-step” methodology of cell-SELEX that successfully selected DNA aptamers specifically against “inflamed” endothelial cells. This has been termed as stimulus-response cell-SELEX (SRC-SELEX). The SRC-SELEX enables the selection of aptamers to distinguish the cells activated by stimulus of healthy cells or cells isolated from diseased tissue. We report a promising aptamer, N55, selected by SRC-SELEX, which can bind specifically to inflamed endothelial cells both in cell culture and atherosclerotic plaque tissue. This aptamer probe was demonstrated as a potential molecular probe for magnetic resonance imaging to target inflamed endothelial cells and atherosclerotic plaque detection.

NMR-based metabonomic analyses of the effects of ultrasmall superparamagnetic particles of iron oxide (USPIO) on macrophage metabolism

The metabonomic changes in murine RAW264.7 macrophage-like cell line induced by ultrasmall superparamagnetic particles of iron oxides (USPIO) have been investigated, by analyzing both the cells and culture media, using high-resolution NMR in conjunction with multivariate statistical methods. Upon treatment with USPIO, macrophage cells showed a significant decrease in the levels of triglycerides, essential amino acids such as valine, isoleucine, and choline metabolites together with an increase of glycerophospholipids, tyrosine, phenylalanine, lysine, glycine, and glutamate. Such cellular responses to USPIO were also detectable in compositional changes of cell media, showing an obvious depletion of the primary nutrition molecules, such as glucose and amino acids and the production of end-products of glycolysis, such as pyruvate, acetate, and lactate and intermediates of TCA cycle such as succinate and citrate. At 48 h treatment, there was a differential response to incubation with USPIO in both cell metabonome and medium components, indicating that USPIO are phagocytosed and released by macrophages. Furthermore, information on cell membrane modification can be derived from the changes in choline-like metabolites. These results not only suggest that NMR-based metabonomic methods have sufficient sensitivity to identify the metabolic consequences of murine RAW264.7 macrophage-like cell line response to USPIO in vitro, but also provide useful information on the effects of USPIO on cellular metabolism.     

Preparation, structural analysis and dielectric properties of Bi x La1−x FeO3 perovskite

Rare earth element substituted bismuth ferrites (BiFeO₃) are of enormous importance as magnetoelectric materials. The polycrystalline samples of Bi _x La_1−x FeO₃ (x=0, 0.2, 0.4, 0.6, 0.8) were prepared by solid-state reaction using standard ceramic method. The single-phase formation of these compounds was confirmed by X-ray diffraction (XRD) studies. The samples with x=0, 0.2, 0.4, 0.6 are found to be orthorhombic while the sample with x=0.8 is triclinic. The dielectric constant (ε′) and dissipation factor (tan δ) were measured in the frequency range 100 Hz to 1 MHz at room temperature and as a function of temperature at certain fixed frequencies (1 kHz, 10 kHz, 100 kHz, 1 MHz). All the samples showed dielectric dispersion. The dielectric constant with temperature shows a broad peak; the peak temperature shifts with frequency which reflects the relaxor-type behavior. The peak above 600 K in the measured temperature range corresponds to antiferromagnetic ordering temperature (Néel temperature). The broadness of the peak changes with composition. The ac conductivity as well as ε′ are found to be maximum for the sample x=0.2 at room temperature.     

Magnetoelectric effect in cobalt ferrite-barium titanate composites and their electrical properties

CoFe₂O₄-BaTiO₃ composites were prepared using conventional ceramic double sintering process with various compositions. Presence of two phases in the composites was confirmed using X-ray diffraction. The dc resistivity and thermoemf as a function of temperature in the temperature range 300 K to 600 K were measured. Variation of dielectric constant (ɛ′) with frequency in the range 100 Hz to 1 MHz and also with temperature at a fixed frequency of 1 kHz was studied. The ac conductivity was derived from dielectric constant (ɛ′) and loss tangent (tan δ). The nature of conduction is discussed on the basis of small polaron hopping model. The static value of magnetoelectric conversion factor has been studied as a function of magnetic field.     

Patenting computer-designed peptides

The problem of designing new peptides that possess specific properties, such as bactericidal activity, is of wide interest. Recently, attention has focused on the use of Computer-Aided Molecular Design techniques in parallel with more traditional 'synthesise and test' methods. These techniques may typically use Genetic Algorithms to optimise molecules based on Neural Network models that predict activity. In this paper we describe a successful application of this Molecular Design methodology that has resulted in novel bactericidal peptides of real value. A key issue for commercial utilisation of such results is the ability to protect the intellectual property rights associated with the discovery of new molecules. Typically peptide patents use structural templates of amino acid hydrophobicity-hydrophilicity that define highly regular peptide patent spaces. In an extension of established patenting practice we describe a patent application that uses a Neural Net predictive model to define the regions of peptide space that we claim within the patent. This formalism makes no a priori assumptions about the regularity of the patent space. A preliminary comparative investigation of the shape and size of this and other bactericidal peptide patent spaces is conducted.     

Neural stem cells from protein tyrosine phosphatase sigma knockout mice generate an altered neuronal phenotype in culture

Background  

The LAR family Protein Tyrosine Phosphatase sigma (PTPσ) has been implicated in neuroendocrine and neuronal development, and shows strong expression in specific regions within the CNS, including the subventricular zone (SVZ). We established neural stem cell cultures, grown as neurospheres, from the SVZ of PTPσ knockout mice and sibling controls to determine if PTPσ influences the generation and the phenotype of the neuronal, astrocyte and oligodendrocyte cell lineages.     

Silica nanocapsules of fluorescent conjugated polymers and superparamagnetic nanocrystals for dual-mode cellular imaging

We describe here a facile and benign synthetic strategy to integrate the fluorescent behavior of conjugated polymers and superparamagnetic properties of iron oxide nanocrystals into silica nanocapsules, forming a new type of bifunctional magnetic fluorescent silica nanocapsule (BMFSN). The resultant BMFSNs are uniform, colloidally stable in aqueous medium, and exhibit the desired dual functionality of fluorescence and superparamagnetism in a single entity. Four conjugated polymers with different emissions were used to demonstrate the versatility of employing this class of fluorescent materials for the preparation of BMFSNs. The applicability of BMFSNs in cellular imaging was studied by incubating them with human liver cancer cells, the result of which demonstrated that the cells could be visualized by dual-mode fluorescence and magnetic resonance imaging. Furthermore, the superparamagnetic behavior of the BMFSNs was exploited for in vitro magnetic-guided delivery of the nanocapsules into the cancer cells, thereby highlighting their potential for targeting biomedical applications.     

Fabrication of polystyrene hollow microspheres as laser fusion targets by optimized density-matched emulsion technique and characterization

Inertial confinement fusion, frequently referred to as ICF, inertial fusion, or laser fusion, is a means of producing energy by imploding small hollow microspheres containing thermonuclear fusion fuel. Polymer microspheres, which are used as fuel containers, can be produced by solution-based micro-encapsulation technique better known as density-matched emulsion technique. The specifications of these microspheres are very rigorous, and various aspects of the emulsion hydrodynamics associated with their production are important in controlling the final product. This paper describes about the optimization of various parameters associated with density-matched emulsion method in order to improve the surface smoothness, wall thickness uniformity and sphericity of hollow polymer microspheres. These polymer microshells have been successfully fabricated in our lab, with 3–30 μm wall thickness and 50–1600 μm diameters. The sphericity and wall thickness uniformity are better than 99%. Elimination of vacuoles and high yield rate has been achieved by adopting the step-wise heating of W₁/O/W₂ emulsion for solvent removal.