Electron Spin Resonance study of gamma irradiated MA-AMPS copolymer

Electron Spin Resonance (ESR) spectra of gamma irradiated methylacrylamide-2-acrylamido-2-methyl-propanesulphonic acid (MA-AMPS) are recorded to identify the radical species formed during the irradiation of the copolymer. The ESR spectrum observed for irradiated MA-AMPS copolymer at liquid nitrogen temperature (LNT) (77 r K) is an asymmetric triplet; while the spectrum observed at room temperature (RT) is a quintet. The intensity distribution of both the spectra deviated appreciably from the expected theoretical values. Computer simulations are employed to analyze the ESR spectra observed at different temperatures. The triplet spectrum observed at LNT is simulated to be a superposition of component spectra arising from macroradicals of the type～CH 2 - \dot {\rm C} H-CH 2 ～ (I), radicals of the type \dot {\rm C} H 2 SO 3 H (II), and peroxy radicals (III). In contrast, the RT spectrum is simulated to be a superposition of component spectra arising due to radicals I, II, III together with the component quartet assigned to methyl radicals ( \dot {\rm C} H 3 ). The formation of such free radicals in irradiated copolymer is discussed.     

Identification of free radicals in irradiated MA-AMPS copolymer

Methacrylamide-2-acrylamido-2-methylpropanesulphonic acid (MA-AMPS) (80:20) is subjected to n -irradiation and the generated free radicals are identified by the electron spin resonance (ESR) technique. The ESR spectrum "obser"ved for MA-AMPS (80:20) has shown a complex line shape, indicating the presence of more than one free radical. Computer simulations are employed to unravel the radicals responsible for the ESR spectrum. Radical "identification has been done with the magnetic parameters employed during computer simulation. The observed ESR spectrum of the copolymer is simulated to be a superposition of component quartet, quintet and singlet spectra. The component spectra are assigned to ～CH 2 - . (CONH 2 )-CH 2 ～ or ～CH 2 - . H-CH 2 ～, . H 3 radicals, "respectively. The possibility of formation of such radicals in the sample material has been discussed.     

Total synthesis of patulolide A through ring closing metathesis

A simple and efficient total synthesis of patulolide A from readily available 7-octen-1-ol is reported by asymmetric synthetic approach. The key reactions involved are asymmetric dihydroxylation using AD-mix-β and Grubbs’ ring-closing metathesis reaction for the synthesis macrocyclic ring system.     

Synthesis of hydrazone derivatives of benzofuran and their antibacterial and antifungal activity

A series of benzofuran hydrazones 6a–6n were synthesized from benzofuran aldehyde and substituted aromatic hydrazides 5a–5n. Structures of all compounds were confimed by IR, ¹H and ¹³C NMR, and Mass spectral data. These compounds were evaluated for their antibacterial activity against gram-negative bacteria (Escherichia coli, –ve), gram-positive bacteria (Bacillus Subtillis, +ve), and antifungal activity against Candida albicans. All compounds demonstrated considerable activity against bacteria and fungi.     

Synthesis and biological evaluation of 1,3,4-oxadiazole fused pyridine derivatives as antibacterial and antifungal agents

Russian Journal of General Chemistry - A series of novel 1,3,4-oxadiazole fused pyridine derivatives were synthesized 11a–11f and their structures confirmed by IR, 1H NMR and Mass spectral...     

Emissions from ethanol-blended fossil fuel flames

A fundamental study to investigate the emission characteristics of ethanol-blended fossil fuels is presented. Employing a heterogeneous experimental setup, emissions are measured from diffusion flames around spherical porous particles. Using an infusion pump, ethanol-fossil fuel blend is transpired into a porous sphere kept in an upward flowing air stream. A typical probe of portable digital exhaust gas analyzer is placed in and around the flame with the help of a multi-direction traversing mechanism to measure emissions such as un-burnt hydrocarbons, carbon monoxide and carbon dioxide. Since ethanol readily mixes with water, emission characteristics of ethanol-water blends are also studied. For comparison purpose, emissions from pure ethanol diffusion flames are also presented. A simplified theoretical analysis has been carried out to determine equilibrium surface temperature, composition of the fuel components in vapor-phase and heat of reaction of each blend. These theoretical predictions are used in explaining the emission characteristics of flames from ethanol blends.     

Numerical simulation of laminar co-flow methane–oxygen diffusion flames: effect of chemical kinetic mechanisms

Laminar co-flow methane–oxygen flames issuing into the unconfined atmosphere have been studied. A numerical model, which employs different chemical kinetics sub-models, including a skeletal mechanism with 43 reaction steps and 18 species and four global reaction mechanisms (two 2-steps and two 4-steps mechanisms), and an optically thin radiation sub-model, has been employed in the simulations. Numerical model has been validated against the experimental results available in literature. The numerical predictions from the global kinetic mechanisms have been compared with the 43-steps mechanism predictions. At all oxygen flow rates, the predictions of the distributions of temperature, mass fractions of CH₄, O₂ and CO₂ by the 2-steps mechanisms are closer to 43-steps mechanism. The overall distribution of H₂O predicted by 2-steps mechanisms is close to that of 43-steps except for the maximum value. Especially at higher oxygen flow rates, the modified 2-steps mechanism predicts these quantities much closer to those predicted by the 43-steps mechanism. Further, the 2-steps mechanisms predict location of the reaction zone accurately. However, they can just give an idea of overall CO distribution in terms of the axial and radial locations within which CO will almost be consumed, but not its maximum value in the domain. The 4-steps mechanisms predict the trend of variation of these quantities quite reasonably. However, they under-predict the location of the reaction zone. At higher oxygen flow rates, the predictions by 4-steps mechanisms becomes better, especially in the prediction of maximum CO and H₂O. Over all, the modified 2-steps mechanism can be recommended for reasonable and economical predictions of oxy-rich methane flames.     

Surface modification of elastomeric stamps for microcontact printing of polar inks

Chemical modification of the surface of a stamp used for microcontact printing (microCP) is interesting for controling the surface properties, such as the hydrophilicity. To print polar inks, plasma polymerization of allylamine (PPAA) was employed to render the surface of poly(dimethylsiloxane) (PDMS), polyolefin plastomers (POP), and Kraton elatomeric stamps hydrophilic for long periods of time. A thin PPAA film of about 5 nm was deposited on the stamps, which increased the hydrophilicity, and which remained stable for at least several months. These surface-modified stamps were used to transfer polar inks by microCP. The employed microCP schemes are as follows: (a) a second generation of dendritic ink having eight dialkyl sulfide end groups to fabricate patterns on gold substrates by positive microCP, (b) fluorescent guest molecules on beta-cyclodextrin (beta-CD) printboards on glass employing host-guest recognition, and (c) Lucifer Yellow ethylenediamine resulting in covalent patterning on an aldehyde-terminated glass surface. All experiments resulted in an excellent performance of all three PPAA-coated stamp materials to transfer the polar inks from the stamp surface to gold and glass substrates by microCP, even from aqueous solutions.     

Creation of crosslinkable interphases in polymer blends

A new type of bi- and trifunctional coupling agents containing 2-oxazoline and/or 2-oxazinone as well as hydrosilane moieties has been prepared by hydrosilylation of the corresponding allyl ether containing precursors with poly(methylhydro)siloxanes. In heterogeneous model blends based on mono-carboxylic acid terminated polystyrene (PS) and mono-amine terminated polyamide 12 (PA), the oxazoline and oxazinone units can selectively react with the carboxylic groups or amino groups, respectively. Under this mixing conditions the hydrosilane partially crosslinks. The morphology development of the three-component blends under melt mixing conditions is a rather complex process. We have shown that the coupling agents are immiscible with the polymers and form their own phase. Under proper processing conditions they locate at least partially at the PS/PA interface and can be used for further modification of the blend interphase, e.g. for crosslinking by hydrolysis. This crosslinking can be accelerated by the addition of a Pt-catalyst during the melt mixing.     

Synthesis of halogen-free amino-functionalized polymethyl methacrylate by atom transfer radical polymerization (ATRP)

In order to obtain amino-terminated polymethyl methacrylate (PMMA-NH₂) free of halogen we used the atom transfer radical polymerization (ATRP) to polymerize methyl methacrylate (MMA) in presence of an initiator containing an alkyl bromide unit and a protected amine functional group. The use of CuBr / N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as co-catalyst system results in a polymer free of halogen due to hydrogen transfer from PMDETA to the growing polymer chain. However, side reactions occur affecting the typically “living” character of the ATRP. The measured molecular weights are consistently higher than the theoretical ones and the molecular weight distributions are relatively broad.