Characterisation of Sol-Gel TiO2 Films by Etching

This article describes the SmartKom Companion, one of three demonstrators developed within the SmartKom project whose goal has been to provide an intuitive and intelligent interface for non-expert users to everyday computer-based applications in different scenarios of use. Conceived for the SmartKom Mobile scenario, the Companion allows intuitive multimodal interaction for drivers and pedestrians. The development of the SmartKom prototypes was constantly accompanied by Wizard-of-Oz experiments as well as system evaluations at different stages of the project. Some usability evaluation results relative to the SmartKom Companion will also be presented.     

In vivo optical analysis of quantitative changes in collagen and elastin during arterial remodeling

Altered collagen and elastin content correlates closely with remodeling of the arterial wall after injury. Optical analytical approaches have been shown to detect qualitative changes in plaque composition, but the capacity for detection of quantitative changes in arterial collagen and elastin content in vivo is not known. We have assessed fluorescence spectroscopy for detection of quantitative changes in arterial composition in situ, in rabbit models of angioplasty and stent implant. Fluorescence emission intensity (FEI) recorded at sites remote from the primary implant site was correlated with immunohistochemical (IH) analysis and extracted elastin and collagen. FEI was significantly decreased (P<0.05) after treatment with anti-inflammatory agents, and plaque area decreased on comparison with saline-treated rabbits after stent implant or angioplasty (Por=0.961) analysis were detected by multiple regression (MR) analysis. Good correlations also were found for FEI with elastin and collagen measured by high-performance liquid chromatography; MR analysis provided highly predictive values for collagen and elastin (R2>or=0.994). Fluorescence spectroscopic analysis detects quantitative compositional changes in arterial connective tissue in vivo, demonstrating changes at sites remote from primary angioplasty and stent implant sites.     

The influence of methacryloxypropyltrimethoxysilane on the sol-gel process of TEOS

The influence of MPS on the hydrolysis and condensation process of TEOS is studied by means of hydrolysis time (t _H) and gelation time (t _G) curves. The addition of MPS to a mixture of TEOS, ethanol and water results in a substantial increase in t _G. The increase is most pronounced when adding takes place in the acid step of the sol-gel process of TEOS.In acid environment hydrolysis of MPS will be dominant compared to hydrolysis of TEOS. This results in an effective decrease of the amount of water available for the hydrolysis of TEOS. However, this decrease in water concentration cannot explain the complete effect of the addition of MPS. The hydrolysed MPS will also be incorporated in the gel network and will strongly influence the cross-linking ability. The lesser functionality of MPS compared to TEOS and the steric hindrance of the acrylate group results in a large increase in t _G.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

C-terminal processing of yeast Spt7 occurs in the absence of functional SAGA complex

Background  

Spt7 is an integral component of the multi-subunit SAGA complex that is required for the expression of ~10% of yeast genes. Two forms of Spt7 have been identified, the second of which is truncated at its C-terminus and found in the SAGA-like (SLIK) complex.     

Investigations of compositional separation in Co-Cr thin film recording media

We investigated the effect of a Ge underlayer and substrate temperature during film deposition (T_s) on the compositional distribution in Co₇₉Cr₂₁ films using spin echo nuclear magnetic resonance and preferential chemical etching. For films deposited at elevated T_s we observed drastic compositional separation (CS) leading to a Co enriched phase with approximately 5 at% Cr on both Ge and polyester. Chemical etching revealed chrysanthemum pattern (CP) type microstructures. For lower T_s films we observed less marked CS with a distinct etched microstructure in the film deposited on Ge and no clear etched microstructure in the film deposited on polyester. Results from NMR and chemical etching studies agreed very well with those from X-ray microanalysis.     

Solid-state electroluminescent devices based on transition metal complexes

Transition metal complexes have emerged as promising candidates for applications in solid-state electroluminescent devices. These materials serve as multifunctional chromophores, into which electrons and holes can be injected, migrate and recombine to produce light emission. Their device characteristics are dominated by the presence of mobile ions that redistribute under an applied field and assist charge injection. As a result, an efficiency of 10 lm/W--among the highest efficiencies reported in a single layer electroluminescent device--was recently demonstrated. In this article we review the history of electroluminescence in transition metal complexes and discuss the issues that need to be addressed for these materials to succeed in display and lighting applications.     

17O-NMR of Sol-Gel Processes of TEOS and TMOS

Water consumption and formation in the acid catalyzed sol-gel processing of TEOS and TMOS can be followed using 17O-NMR. By using 17O-enriched water, insight into the hydrolysis and condensation in the acid step of the sol-gel process can be obtained. It is found that, after initially strong consumption of water due to hydrolysis, a steady state water concentration results. This amount of water increases upon dilution of the reaction mixture with alcohol. For a hydrolyzed TMOS-methanol-water system lower water contents are found than in a comparable TEOS-ethanol system. Addition of ethanol to a hydrolyzed TMOS methanol system enhances the condensation and a higher water concentration is found.     

Identification of a quenching species in ruthenium tris-bipyridine electroluminescent devices

We have used matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry and micro-Raman spectroscopy to identify a quenching species that is formed during operation of [Ru(bpy)3]2+ electroluminescent devices. We identify this performance-degrading product to be the oxo-bridged dimer [(bpy)2(H2O)RuORu(OH2)(bpy)2]4+ and show this dimer to be an effective quencher of device luminescence. This work is the first to detect a specific chemical degradation product formed during iTMC OLED operation.     

Remanence curves of thin-film media with a tilted easy magnetisation direction corrected for demagnetisation

Remanence curves have been measured of metal evaporated tape with a tilted easy magnetisation direction. A method to compensate for the demagnetising field was applied. The δm curve along the intrinsic easy direction shows combined positive and negative interactions, along the intrinsic hard direction only negative interactions. These results could be reproduced with a moving-Preisach Stoner-Wohlfarth hysteresis model.