Determination of organophosphorous pesticides in the ppq range using a simple solid-phase extraction method combined with dispersive liquid-liquid microextraction

Solid-phase extraction combined with dispersive liquid-liquid microextraction (SPE-DLLME) was applied for the extraction of six organophosphorous pesticides (OPPs) in water samples. The analytes considered in this study were determined by gas chromatography with mass spectrometry and included prophos, diazinon, chlorpyrifos methyl, methyl parathion, fenchlorphos and chlorpyrifos. Several extraction conditions (extraction solvent and elution/dispersion solvents nature, extraction solvent volume, elution solvent volume, water volume and sample volume) were tested for SPE-DLLME with these analytes and the best results were obtained using carbon tetrachloride as the extraction solvent and acetone as the elution/dispersion solvent. Calibration curves for the determination of OPPs in water samples were constructed in the concentration range of 10-100 ng/L. Limits of detection (LODs) ranged from 38 to 230 pg/L values that are below the maximum admissible level for drinking water (100 ng/L). Relative standard deviations (RSD) were between 8.6 and 10.4% for a fortification level of 100 ng/L. At the same fortification level, the relative recoveries (R.R.) of tap, well and irrigation water samples were in the range of 30.2-97.1%.     

On the radical mechanism for photoinduced nucleation of alkane vapors

The addition of 10^?5 — 2 Torr of NO, a radical scavenger, is found to significantly quench the rate of photonucleation of nonane by NO₂ or CH₃I in a diffusion cloud chamber. This confirms a recently proposed radical mechanism for the photoinduced nucleation of these systems. The photonucleation rate of nonane induced by o-tolualdehyde (a system whose mechanism is not known) is similarly quenched by the addition of small amounts of NO, suggesting a radical mechanism. A mechanism for this system, based upon the formation of nonane radicals (resulting from hydrogen abstraction from nonane by the carbonyl molecules in the n,π* singlet or triplet state) followed by further reaction of the radicals to form low vapor pressure species, is discussed. Acetone, a system known to dissociate into radicals, is found to photoinduce nucleation of nonane when excited to the lowest singlet or triplet excited states. This adds further support to the proposed radical mechanism and suggests that acetone dissociates in its lowest singlet as well as its lowest triplet state. A theoretical model is outlined in which the production of large involatile alkanes (dimers and higher polymers) are formed from an initially produced nonane radical. These results are combined with binary nucleation theory in order to calculate the effect of these species on the rate of nucleation. These calculations indicate that low concentrations of these involatile species can indeed induce nucleation. The ability of small, photochemically produced polymers to induce nucleation is also examined and the time dependent space distribution of polymers (e.g., vinyl polymers) generated by chain transfer from a single free radical is derived. The small polymers formed in this process are analogous to the species formed in the photoinduced nucleation of alkane vapors.     

Bovine serum albumin adsorption onto 316L stainless steel and alumina: a comparative study using depletion,protein radiolabeling,quartz crystal microbalance and atomic force microscopy

The importance of protein adsorption on biomaterials is widely recognized, but the dependence of the adsorption results on the chosen technique has not been much addressed. The objective of this work is to compare adsorption data obtained using several techniques under experimental conditions as closely as possible. Two case studies were investigated: adsorption of bovine serum albumin (BSA) onto 316L stainless steel (SS) and onto alumina. Both materials were used as powders and plates, whose characterization was done through zeta potential (ZP) measurements. The experimental techniques were depletion, protein radiolabeling, quartz crystal microbalance with dissipation (QCM‐D) and atomic force microscopy (AFM). The adsorption isotherms obtained with depletion and QCM‐D techniques, although quantitatively different, present some similarities in shape. Both techniques suggest the existence of a compact end‐on monolayer of protein on the SS surface, while on the alumina surface a less dense side‐on monolayer is formed at lower BSA concentration, followed by a second layer at higher concentration. AFM topographical characterization of the protein films adsorbed on both materials confirms those findings. Further use of AFM in determining the thickness of the film adsorbed on SS yielded values in good agreement with the QDM‐D results. Different surface charges measured on powders and plates do not seem to affect adsorption. Protein radiolabeling seems to be the least reliable technique because it yields, for both materials, adsorption values higher than those from the other techniques. In the case of SS, the difference amounts to one order of magnitude. Copyright © 2008 John Wiley & Sons, Ltd.     

Behaviour of wetting films of sodium hyaluronate saline solutions

The behaviour of wetting films of sodium hyaluronate (NaHA) saline solutions, at physiological conditions, is investigated using interferometry. Concentrations in the range of dilute and semi-dilute regimes were chosen to assess the role of bulk molecular interactions on the surface forces. The transition from dilute to semi-dilute solutions is known to occur at c*=0.59 mg mL(-1). Dilute solutions form stable films whose behaviour is explained by van der Waals interactions. For semi-dilute solutions, the disjoining pressure vs film thickness isotherms show branches attributed to stepwise thinning or film stratification, which is interpreted in terms of a network as predicted by the theory of semi-dilute polyelectrolyte solutions. The distance between branches is 16 nm for the NaHA concentration of 2 mg mL(-1) and 12 nm for the concentration of 3.5 mg mL(-1), in agreement with the calculated correlation lengths of the polymeric network. Since no experimental evidence exists for the presence of a stable network in the bulk, this tendency for self-association should be the result of the liquid confinement. To our knowledge, the existence of oscillatory disjoining pressure isotherms in the presence of excess salt was never observed for other polyelectrolyte solutions.     

Dieudonné rings associated with

We use Dieudonné theory for periodically graded Hopf rings to determine the Dieudonné ring structure of the -graded Morava -theory , with an odd prime, when applied to the -spectrum (and to ). We also expand these results in order to accomodate the case of the full Morava -theory .

     

Wettability of cellular polyurethane

Cellular polymers constitute an important field of investigation due to their unique properties as shock absorbers and thermal or acoustic insulators. The knowledge of the wetting properties of these materials is important in applications where adhesion or weathering behavior are an issue. In this study, cellular polyurethane polymers were used to investigate the effect of the cellular structure on the wetting properties. The polymeric substrates were analyzed by scanning electron microscopy and the wetting properties were studied by goniometry. The contact angles of water and diiodomethane were measured as a function of time and the surface tension of the expanded polymers was evaluated by the geometric and harmonic mean methods. It was found that the wettability and the surface energy of the cellular polymers increase as the density decreases. © 1997 John Wiley & Sons, Inc.     

Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

A new method for bidimensional analysis of interferometric patterns of liquid films

A new method for bidimensional analysis of interferometric patterns of wetting liquid films obtained with the captive bubble technique is described. This method replaces one-dimensional analysis along various intensity profiles with analysis of one average intensity profile. The advantage is to concentrate the surface characteristics of the whole film image into a single intensity profile.     

Stability of triglyceride liquid films on hydrophilic and hydrophobic glasses

Wetting and dewetting of solid surfaces by oily fluids were investigated in terms of the stability of the liquid film formed between an air bubble and the solid surface. With the objective of understanding how molecules with low polarity but relatively complex molecular structure behave at the solid/liquid interface, three liquid triglycerides with different chain length and saturation were chosen, namely, tributyrin, tricaprylin, and triolein. Tributyrin and tricaprylin exist in milkfat while triolein is present in vegetable oils. The stability of the liquid films may be inferred from the shape of the disjoining pressure isotherms, which represent the dependence of the disjoining pressure on the film thickness. Disjoining pressure isotherms for films of the three triglycerides on hydrophilic and hydrophobic glasses were obtained using a recently developed apparatus, based on the interferometric technique. The experimental curves are compared with the theoretical predictions of London-Hamaker. The deviations between theory and experiment are interpreted in terms of a structural component of the disjoining pressure. All triglycerides form metastable films on both hydrophilic and hydrophobic glasses which means that for disjoining pressures higher than a critical value, pi(c), a wetting transition occurs and the film ruptures. The mechanisms for film rupture are discussed and a correlation between film stability and the apolar (Lifshitz-van der Waals) and the polar components of the spreading coefficient is proposed.