A highly active fungal β-glucosidase

A highly active thermostable β-glucosidase was purified to homogeneity from a strain ofTrichoderma sp. The enzyme was an extracellular glycoprotein and showed hydrolytic activity toward several β-glucosides. Cellobiose was found to be the substrate of choice for this enzyme. This finding could suggest future technological applications of the purified protein.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Unprecedented detection of inherent chirality in uranyl-salophen complexes

In complexes with the uranyl dication salophen ligands are highly puckered. This implies that non-symmetrically substituted uranyl-salophen derivatives exist in principle as a pair of enantiomers. However, due to easy disrotations about the bonds connecting the phenoxide units to the imine carbons, the rate of interconversion between enantiomeric forms of simple, sterically unhindered compounds is extremely fast. Bulky substituents in appropriate positions decrease the interconversion rate and make this novel type of inherent chirality detectable by 1H and 13C NMR.     

Solvation dynamics in acetonitrile: a study incorporating solute electronic response and nuclear relaxation

The solvent reorganization process after electronic excitation of a polar solute in a polar solvent such as acetonitrile is related mainly to the time evolution of the solute-solvent electrostatic interaction. Modern laser-based techniques have sufficient time resolution to follow this decay in real time, providing information to be confirmed and interpreted by theories and models. We present here a study aimed at the investigation of the different steps involved in the process taking place after a vertical S(0) --> S(1) excitation of a large size chromophore, coumarin 153 (C153), in acetonitrile, from both the solute and the solvent points of view. To do this, we use accurate quantum mechanical calculations for the solute properties within the polarizable continuum model (PCM) and classical molecular dynamics (MD) simulations, both equilibrium and nonequilibrium, for C153 in the presence of the solvent. The geometry of the solute is allowed to change in order to study the role of internal motions in the time-dependent solvation process. The solvent response function has been obtained from the simulation data and compared to experiment, while the comparison between equilibrium and nonequilibrium MD results for the solvation response confirms the validity of the linear response approximation in the C153-acetonitrile system. The MD trajectories have also been used to monitor the structure of the solvation shell and to determine its change in response to the change in the solute partial charges.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Flow-injection determination of inorganic forms of nitrogen by gas diffusion and conductimetry

A flow-injection—conductimetric method was applied to the determination of ammonia, nitrate and nitrite at concentrations down to 5, 20 and 20 ng ml^?1, respectively. Ammonia was determined by merging the injected sample with an alkaline solution (NaOHEDTA) and passing the mixture through a diffusion cell. The ammonia released was collected by a flowing stream of deionized water that passed through a conductance flow cell. Nitrate and nitrite concentrations were determined after reduction to ammonia in alkaline medium using a column filled with metallic zinc. The ammonia produced was then measured as described above. About 60 samples per hour can be processed with a relative standard deviation of about 1%. Satisfactory agreement was observed between results for ammonia in samples of natural water and nitrate in tap and mineral water determined by the proposed method and by standard spectrophotometric procedures. Speciation can be achieved by adding sulphanilic acid to remove nitrite from the sample and determining the ammonia without the use of the column.     

Photophysics of Push–Pull Distyrylfurans,Thiophenes and Pyridines by Fast and Ultrafast Techniques

Time‐resolved transient absorption and fluorescence spectroscopy with nano‐ and femtosecond time resolution were used to investigate the deactivation pathways of the excited states of distyrylfuran, thiophene and pyridine derivatives in several organic solvents of different polarity in detail. The rate constant of the main decay processes (fluorescence, singlet–triplet intersystem crossing, isomerisation and internal conversion) are strongly affected by the nature [locally excited (LE) or charge transfer (CT)] and selective position of the lowest excited singlet states. In particular, the heteroaromatic central ring significantly enhances the intramolecular charge‐transfer process, which is operative even in a non‐polar solvent. Both the thiophene and pyridine moieties enhance the S₁→T₁ rate with respect to the furan one. This is due to the heavy‐atom effect (thiophene compounds) and to the ¹(π,π)*→³(n,π)* transition (pyridine compounds), which enhance the spin‐orbit coupling. Moreover, the solvent polarity also plays a significant role in the photophysical properties of these push–pull compounds: in fact, a particularly fast ¹LE*→¹CT* process was found for dimethylamino derivatives in the most polar solvents (time constant, τ≤400 fs), while it takes place in tens of picoseconds in non‐polar solvents. It was also shown that the CT character of the lowest excited singlet state decreased by replacing the dimethylamino side group with a methoxy one. The latter causes a decrease in the emissive decay and an enhancement of triplet‐state formation. The photoisomerisation mechanism (singlet/triplet) is also discussed.     

Tuning the phase transition of ZnO thin films through lithography: an integrated bottom‐up and top‐down processing

An innovative approach towards the physico‐chemical tailoring of zinc oxide thin films is reported. The films have been deposited by liquid phase using the sol–gel method and then exposed to hard X‐rays, provided by a synchrotron storage ring, for lithography. The use of surfactant and chelating agents in the sol allows easy‐to‐pattern films made by an organic–inorganic matrix to be deposited. The exposure to hard X‐rays strongly affects the nucleation and growth of crystalline ZnO, triggering the formation of two intermediate phases before obtaining a wurtzite‐like structure. At the same time, X‐ray lithography allows for a fast patterning of the coatings enabling microfabrication for sensing and arrays technology.     

Vortex lattice mobility and effective pinning potentials in the peak effect region in YBCO crystals

The peak effect (PE) in the critical current density in both low and high temperature superconductors has been the subject of a large amount of experimental and theoretical work in the last few/several years. In the case of YBCO, crucial discussions describing a dynamic or a static picture are not settled. In that region of field and temperature the mobility of the vortex lattice (VL) is found to be dependent on the dynamical history. Recently we reported evidence that the VL reorganizes and accesses to robust VL configurations (VLCs) with different effective pinning potential wells arising in response to different system histories. One of the keys to understand the nature of the PE is to investigate the VL behavior in the vicinity of the various VLCs in the region of the PE. The stability of these VLCs was investigated and it was found that they have distinct characteristic relaxation times, which may be related to elastic or plastic creep processes. In this paper we review some of these results and propose a scenario to describe the PE in YBCO crystals.