A highly active fungal β-glucosidase

A highly active thermostable β-glucosidase was purified to homogeneity from a strain ofTrichoderma sp. The enzyme was an extracellular glycoprotein and showed hydrolytic activity toward several β-glucosides. Cellobiose was found to be the substrate of choice for this enzyme. This finding could suggest future technological applications of the purified protein.     

Solvation dynamics in acetonitrile: a study incorporating solute electronic response and nuclear relaxation

The solvent reorganization process after electronic excitation of a polar solute in a polar solvent such as acetonitrile is related mainly to the time evolution of the solute-solvent electrostatic interaction. Modern laser-based techniques have sufficient time resolution to follow this decay in real time, providing information to be confirmed and interpreted by theories and models. We present here a study aimed at the investigation of the different steps involved in the process taking place after a vertical S(0) --> S(1) excitation of a large size chromophore, coumarin 153 (C153), in acetonitrile, from both the solute and the solvent points of view. To do this, we use accurate quantum mechanical calculations for the solute properties within the polarizable continuum model (PCM) and classical molecular dynamics (MD) simulations, both equilibrium and nonequilibrium, for C153 in the presence of the solvent. The geometry of the solute is allowed to change in order to study the role of internal motions in the time-dependent solvation process. The solvent response function has been obtained from the simulation data and compared to experiment, while the comparison between equilibrium and nonequilibrium MD results for the solvation response confirms the validity of the linear response approximation in the C153-acetonitrile system. The MD trajectories have also been used to monitor the structure of the solvation shell and to determine its change in response to the change in the solute partial charges.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Kinetic Resolution of Allylic Alcohols Promoted by Electrophilic Selenium Reagents

Abstract

The first example of a kinetic resolution process promoted by an electrophilic selenium reagent is reported. Racemic allylic alcohols react with half equivalents of a selenenylating agent in methanol leading to the regiospecific formation of the corresponding addition products with a very high level of facial selectivity (98% de). The unreacted alcohol can be recovered in a optically enriched form (92% ee).     

Photophysics of Push–Pull Distyrylfurans,Thiophenes and Pyridines by Fast and Ultrafast Techniques

Time‐resolved transient absorption and fluorescence spectroscopy with nano‐ and femtosecond time resolution were used to investigate the deactivation pathways of the excited states of distyrylfuran, thiophene and pyridine derivatives in several organic solvents of different polarity in detail. The rate constant of the main decay processes (fluorescence, singlet–triplet intersystem crossing, isomerisation and internal conversion) are strongly affected by the nature [locally excited (LE) or charge transfer (CT)] and selective position of the lowest excited singlet states. In particular, the heteroaromatic central ring significantly enhances the intramolecular charge‐transfer process, which is operative even in a non‐polar solvent. Both the thiophene and pyridine moieties enhance the S₁→T₁ rate with respect to the furan one. This is due to the heavy‐atom effect (thiophene compounds) and to the ¹(π,π)*→³(n,π)* transition (pyridine compounds), which enhance the spin‐orbit coupling. Moreover, the solvent polarity also plays a significant role in the photophysical properties of these push–pull compounds: in fact, a particularly fast ¹LE*→¹CT* process was found for dimethylamino derivatives in the most polar solvents (time constant, τ≤400 fs), while it takes place in tens of picoseconds in non‐polar solvents. It was also shown that the CT character of the lowest excited singlet state decreased by replacing the dimethylamino side group with a methoxy one. The latter causes a decrease in the emissive decay and an enhancement of triplet‐state formation. The photoisomerisation mechanism (singlet/triplet) is also discussed.     

Tuning the phase transition of ZnO thin films through lithography: an integrated bottom‐up and top‐down processing

An innovative approach towards the physico‐chemical tailoring of zinc oxide thin films is reported. The films have been deposited by liquid phase using the sol–gel method and then exposed to hard X‐rays, provided by a synchrotron storage ring, for lithography. The use of surfactant and chelating agents in the sol allows easy‐to‐pattern films made by an organic–inorganic matrix to be deposited. The exposure to hard X‐rays strongly affects the nucleation and growth of crystalline ZnO, triggering the formation of two intermediate phases before obtaining a wurtzite‐like structure. At the same time, X‐ray lithography allows for a fast patterning of the coatings enabling microfabrication for sensing and arrays technology.     

Analytical first derivatives of molecular surfaces with respect to nuclear coordinates

We present analytical expressions for the first derivatives of area and other geometrical quantities of polygonal tesserae defined on molecular surfaces. This is a necessary step in the calculation of free energy derivatives with respect to nuclear coordinates for molecular solutes, in the framework of the polarizable continuum method. An application to solute-solvent dispersion energy derivatives is presented. © 1996 by John Wiley & Sons, Inc.     

Preparation of a new chiral non-racemic sulfur-containing diselenide and applications in asymmetric synthesis

The synthesis of the new chiral non-racemic sulfur-containing diselenide, di-2-methoxy-6-[(1S)-1-(methylthio)ethyl]phenyl diselenide, is described. When treated with ammonium persulfate this diselenide is transformed into the corresponding selenenyl sulfate, which acts as a strong electrophilic reagent and adds to alkenes, in the presence of methanol or water, to afford the products of selenomethoxylation or selenohydroxylation, respectively, with excellent diastereoselectivities. Starting from alkenes containing internal nucleophiles, asymmetric cyclofunctionalization reactions also resulted in good chemical yields, complete regioselectivities, and high diastereoselectivities. This sulfur-containing diselenide can also be used in catalytic amounts to promote one-pot selenenylation-deselenenylation processes, from which several types of products can be obtained in high yield and with good enantiomeric excess.     

Determination of traces of iron in indium phosphide by electrothermal atomic absorption spectrometry combined with solvent extraction

An electrothermal atomic absorption (ETAAS) method for the determination of traces of iron (0.1-1.0 microgram g-1) in Fe-doped indium phosphide (InP) has been developed. In order to overcome the indium matrix-effect and to achieve a useful detection limit, a preliminary solvent-extraction of Fe(III) with acetylacetone (HAA) is necessary. After sample dissolution with hydrochloric acid (1 + 1) the digest is evaporated to dryness, Fe(II) is oxidized to Fe(III) with nitric acid, the residue is dissolved in 0.01 mol L-1 HCl and the iron is extracted at pH 2.0 with 0.5 mol L-1 HAA in toluene. The organic phase is injected into the graphite furnace and the iron is directly evaluated by external organic standard calibration. The limit of detection (3SB) resulting from further in-situ preconcentration is 0.03 microgram g-1. When the method was applied to the analysis of real samples containing 0.2-0.7 microgram g-1 Fe, the RSD was in the range 8-21%. Results were compared with those independently obtained on the decomposed sample solution with inductively coupled atomic emission spectrometry (ICP-AES). The detection limit of the ICP-AES method, that needs matrix-matched standards, is 0.20 microgram g-1.