Isotopic production cross sections of residues in reactions induced by relativistic heavy ions with protons and deuterons

The isotopic production cross sections of heavy residues in relativistic heavy-ion collisions have been investigated in inverse kinematics. The primary reaction products were fully identified in mass and atomic number prior to beta decay using the fragment separator FRS. The huge collection of data obtained helps in the understanding of the two main reaction mechanisms involved: fragmentation and fission. These data provide basic information for future radioactive ion beam facilities and for technical applications like intense neutron sources by means of spallation targets.     

Low-energy fission investigated in reactions of 750 AMeV 238U-ions on 208Pb. II: Isotopic distributions

Projectile fission of 750 AMeV ²³⁸U-ions interacting with a Pb target was studied by means of the spectrometer FRS, GSI-Darmstadt. One of the two fission fragments was detected with a transmission of few percent and identified in mass and charge. Low-energy fission (E^* < 25 MeV) events were selected by their magnetic rigidity. Whereas the production of asymmetric fission events is dominated by the GDR excitation, very asymmetric fission and symmetric fission take place after a GQR or DGDR excitation or after a nuclear interaction. Cross sections of more than 250 isotopes were measured. Isotopic distributions of low-energy fission were reconstructed for elements from Se to Te. The fission modes SI, SII and SL were clearly shown in these distributions and in the mass and TKE distributions. Charge polarization and mass dispersion were deduced for each fission mode. Finally, the characteristics of the low-energy fission process explain the production rates of neutron-rich species. Received: 14 July 1997 / Revised version: 6 October 1997     

Separation and implantation of relativistic86Kr-fragments at the FrS; half-life measurement by ion-β time-correlations

Neutron-rich Co and Fe isotopes produced by⁸⁶Kr projectile fragmentation at 500 MeV/u were separated and identified using the fragment separator (FrS) in a bunched energy mode.⁶⁶Co and⁶⁵Fe ions were selectively implanted in a double PIN-diode array where the-decay signals were measured. The half-lives were deduced from time correlations between implantation and-decay signals. The remeasurement of the⁶⁶Co half-life confirms the isotope identification. The value of the⁶⁵Fe half-life was found to be 0.45±0.15 s.     

Molecular mass distribution analysis of ethyl(hydroxyethyl)cellulose by size-exclusion chromatography with dual light-scattering and refractometric detection

Dual low-angle light scattering and refractometric detection coupled to size-exclusion chromatography provided proof for the presence of a low amount of stable aggregates/particles in ethyl(hydroxyethyl)cellulose. Unlike the correct size-exclusion chromatographic behavior of the parent polysaccharide itself, the aggregates exhibit variable size-dependent weak retention as a function of flow-rate and of ionic strength of the aqueous mobile phase. Therefore, determination of the molecular mass of non-aggregated polymer is possible in aqueous mobile phase containing 0.1 M NaCl under conditions at which aggregates are completely adsorbed on the column packing irrespective of the flow-rate used. Flow-rate and ionic strength-dependent variations of aggregate behavior as well as model size-exclusion experiments with latex particles indicate that they partly carry a minute charge and have a compact structure. Their weak retention under the separation conditions used suggests a difference in their surface chemistry when compared with the dissolved polymer coils which exhibit a correct size-exclusion behavior.     

Molar mass characterization of cationic methyl methacrylate-ethyl acrylate copolymers using size-exclusion chromatography with online multi-angle light scattering and refractometric detection

Size-exclusion chromatography (SEC) combined with online multi-angle light scattering (MALS) and refractometric (RI) detection has been employed for the molar mass characterisation of water-insoluble cationic methyl methacrylate-ethyl acrylate copolymers (Eudragit RS and RL). Due to their positive charge, cationic polymers are particularly difficult to separate on a SEC column, in worst cases being completely adsorbed on the oppositely charged packing material. This work has examined how a careful addition of salt (LiCl) to the copolymer solution in ethanol decreases the electrostatic interactions, clearly seen as a decrease in elution volume from the SEC column as well as an improved recovery. At a certain level of ionic strength, typically about 50 mM, the copolymer recovery from the SEC column reached 100% and molar mass distributions corresponding to the complete sample could be obtained. The combined MALS/RI detection gives the opportunity to measure the absolute molar mass independent of recovery and retention. Thus, in this study, it turned out to be a favourable tool for tracing the changes in elution behaviour of the charged copolymer as the ionic strength was increased.     

ON PHOTOREACTIONS OF ANTHRACENE IN SOLID MATRIX—I. PHOTODIMERIZATION

Abstract— The influence of a surrounding transparent matrix on the photochemical behavior of an absorbing solute has been investigated on the particular case of anthracene in KBr , KCl and in HBO₂ and B₂O₃ glasses. In KBr compressed powders, dianthracene formation occurs with a high yield, whereas it is forbidden or negligible for pure crystalline anthracene.
Experiments show that the anthracene molecules are associated in microcrystals and suggest that the dimerization reaction occurs at the interface between KBr and anthracene crystals.
Such an influence of the heterogeneity of the irradiated medium may have implications in photobiology where heterogeneous structures are the general rule.     

Preparation of dimethoxyborane and analysis by Fourier transform infrared spectroscopy

Dimethoxyborane was prepared by the reaction of trimethoxyboroxine, sodium borohydride and trimethyl borate in diethylene glycol dimethyl ether solvent at 70°C under atmospheric pressure followed by distillation to increase the purity and analyzed in liquid phase by FT-IR. The concentration of dimethoxyborane was identified by hydrolysis with water, which yields boric acid, methanol and hydrogen, whereas the generated hydrogen was analyzed by the mass detector of a volumetric flow apparatus. The FT-IR absorbance peak area showed a linear dependence on dimethoxyborane concentration in the wavenumber range 873 to 950 cm⁻¹ for samples with dimethoxyborane concentrations 0 to 6.2 wt% in trimethyl borate. Data fitting using the least square method gave an R ² value of 97%.     

Conjugation of linoleic acid over a hydrogen pre-activated heterogeneous catalyst

Development of a new heterogeneous catalytic pathway for isomerization of linoleic acid to conjugated linoleic acids at mild reaction conditions over Ni/H-MCM-41 in a soluted system.     

Deroughening of domain wall pairs by dipolar repulsion

As a magnetic domain wall propagates under small fields through a random potential, it roughens as a result of weak collective pinning, known as creep. Using Kerr microscopy, we report experimental evidence of a surprising deroughening of wall pairs in the creep regime, in a 0.5 nm thick Co layer with perpendicular anisotropy. A bound state is found in cases where two rough domains nucleated far away from one another and first growing under the action of a magnetic field eventually do not merge. The two domains remain separated by a strip of unreversed magnetization, characterized by flat edges and stabilized by dipolar fields. A creep theory that includes dipolar interactions between domains successfully accounts for (i) the domain wall deroughening as the width of the strip decreases and (ii) the quasistatic and dynamic field dependence of the strip width s.