Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

Real-time algorithm,based on two extra sensors,for monitoring platform’s orientation of underactuated parallel wrists

The direct position analysis of parallel manipulators (PMs) brings to determine a finite number of platform poses compatible with an assigned set of actuated-joint variables’ values. Therefore, when, during functioning, the need to check the actual platform pose arises, the sensors usually located on the actuators are not sufficient and the additional pieces of information coming from ad-hoc-devised extra sensors are necessary. Here, for the first time, the actual implementation of extra sensors in underactuated parallel wrists (PWs) which contain a nonholonomic constraint is addressed. Differently from “ordinary” (i.e., non-underactuated) PWs, these PWs requires a continuous monitoring of the actual platform orientation to compensate the possible sliding in the nonholonomic constraint. Thus, in this case, the algorithms that interpret the pieces of information coming from the sensors must work in real time and must be integrated in the control software that manages the motion of the machine. All these special requirements are satisfied by the proposed algorithm. Moreover, the proposed hardware can also be implemented in some ordinary PWs with a cheap add-on kit.     

Cumulant functions in optical coherence theory

Cumulant functions are introduced to describe the statistical state of a radiation field. These functions are simply related to the optical coherence functions but have some interesting features. It is shown that if the cumulant functions of all orders greater than some numberN ₀ vanish then they also vanish for all orders greater than 2. Thermal field is the only field having this property. This property holds whether the field is described by a classical stochastic process or by a quantum density operator. Further the particular operator ordering used in defining these cumulant functions for the quantized field affects only the second order cumulant function. To describe the statistical state of a vector field such as partially polarized or unpolarized radiation, one would need to introduce cumulant tensors.     

Measurement and analysis of scattered radiation by means of a variable f.o.v. transmissometer

Summary A variable field-of-view transmissometer has been used in order to distinguish the contribution of forward-scattered radiation to the power transmitted through a diffusing medium. Measurements were made in fog and in the laboratory, where the medium was a suspension of polystyrene spheres in water. The analysis of scattered radiation gave information on the diffusing medium. In laboratory measurements it was possible to separate the contributions of different orders of scattering. Paper presented at the 1^o Congresso del Gruppo Nazionale per la Fisica dell'Atmosfera e dell'Oceano, June 19–22, 1984, Rome.     

C2C12 myoblast sensitivity to different apoptotic chemical triggers

Apoptosis is a form of cell death crucial for normal development and tissue homeostasis. Its typical features include chromatin changes, nuclear breakdown, plasma membrane blebbing and splitting of cellular content into apoptotic bodies, that progressively undergo phagocytosis.Apoptosis is considered essential for skeletal muscle development, where defective cells are deleted during differentiation. In addition, it plays a relevant role in several muscle myopathies, as well as in denervation and disuse.The aim of this study was to evaluate muscle cell sensitivity to different apoptotic triggers, acting through different mechanisms of action. Chemical agents, active against distinct intracellular targets, such as mitochondrial respiratory chain and DNA, have been chosen to better highlight cell death mechanisms. To induce apoptosis, C2C12 myoblasts have been exposed to H₂O₂, staurosporine, cisplatin and etoposide, at different doses and incubation times, and they have been analysed by flow cytometry, scanning and transmission electron microscopy.Flow cytometry analysis revealed a certain subdiploid peak after all treatments. The best apoptotic effect was observable, as confirmed at reverted microscope, at minimum doses and after the major exposure time.At ultrastructural level programmed cell death has been observed. Characteristic chromatin condensation and margination, as well as apoptotic bodies, frequently appeared, even if in the presence of secondary necrosis; surface blebs were also observed during scanning microscopic observation.In particular, exposure to H₂O₂ or staurosporine showed the largest number of myoblasts in late apoptotic stages and in secondary necrosis. Cisplatin treatments revealed few early apoptotic cells. The analysis of etoposide-induced apoptosis was in agreement with data obtained from flow cytometry, indicating a significant increase of apoptotic cell number.These results suggest that all conditions are able to induce apoptosis in C2C12 myoblasts, which occurs, considering trigger mechanisms of action, mostly following the mitochondrial pathway, if not excluding that due to DNA damage. Therefore, mitochondria permeability alteration is an important step in skeletal muscle programmed cell death. This last conclusion seems to have a significant relevance in understanding the mechanisms involved in muscle disorders, denervation and chronic muscle disuse, conditions frequently characterized by a decline in mitochondrial content and by an increase of mitochondrial apoptosis susceptibility.     

Gas phase activation energy for unimolecular dissociation of biomolecular ions determined by focused RAdiation for gaseous multiphoton ENergy transfer (FRAGMENT)

We present a novel approach for the determination of activation energy for the unimolecular dissociation of a large (>50 atoms) ion, based on measurement of the unimolecular dissociation rate constant as a function of continuous-wave CO(2) laser intensity. Following a short ( approximately 1 s) induction period, CO(2) laser irradiation produces an essentially blackbody internal energy distribution, whose 'temperature' varies inversely with laser intensity. The only currently available method for measuring such activation energies is blackbody infrared radiative dissociation (BIRD). Compared with BIRD, FRAGMENT: (a) eliminates the need to heat the surrounding ion trap and vacuum chamber to each of several temperatures (each requiring hours for temperature equilibration); (b) offers a three-fold wider range of effective blackbody temperature; and (c) extends the range of applications to include initially cold ions (e.g., gas-phase H/D exchange). Our FRAGMENT-determined activation energy for dissociation of protonated bradykinin, 1.2 +/- 0.1 eV, agrees within experimental error to the value, 1.3 +/- 0.1 eV, previously reported by Williams et al. from BIRD experiments. Copyright 1999 John Wiley & Sons, Ltd.     

Topological stabilization for synchronized dynamics on networks

A general scheme is proposed and tested to control the symmetry breaking instability of a homogeneous solution of a spatially extended multispecies model, defined on a network. The inherent discreteness of the space makes it possible to act on the topology of the inter-nodes contacts to achieve the desired degree of stabilization, without altering the dynamical parameters of the model. Both symmetric and asymmetric couplings are considered. In this latter setting the web of contacts is assumed to be balanced, for the homogeneous equilibrium to exist. The performance of the proposed method are assessed, assuming the Complex Ginzburg-Landau equation as a reference model. In this case, the implemented control allows one to stabilize the synchronous limit cycle, hence time-dependent, uniform solution. A system of coupled real Ginzburg-Landau equations is also investigated to obtain the topological stabilization of a homogeneous and constant fixed point.     

Spectral control for ecological stability

A system made up of N interacting species is considered. Self-reaction terms are assumed of the logistic type. Pairwise interactions take place among species according to different modalities, thus yielding a complex asymmetric disordered graph. A mathematical procedure is introduced and tested to stabilise the ecosystem via an ad hoc rewiring of the underlying couplings. The method implements minimal modifications to the spectrum of the Jacobian matrix which sets the stability of the fixed point and traces these changes back to species–species interactions. Resilience of the equilibrium state appear to be favoured by predator-prey interactions.     

Morphological changes of Aeromonas hydrophila in response to osmotic stress

The adaptive response of bacteria to stressful environmental situations may lead to a modification of physiological and phenotypical characteristics, including morphology. The aim of this study was the analysis of the ultrastructural changes in Aeromonas hydrophila exposed to different NaCl concentrations (1.7%, 3.4%, 6%) at 4 and 24 °C for 188 days.Bacterial cultures were processed for scanning and transmission electron microscopy, and specimens were analysed at different times during osmotic stress.SEM reveals the presence of three predominant morphotypes: rod, filamentous and spherical forms, depending on the time and culture conditions. Normal rod cells prevail in 1.7% NaCl growth conditions, maintaining high rates until the end of the trial at 4 °C. The most favourable conditions for the elongated morphotype are 3.4% NaCl at 4 °C. Spherical forms appear later, increase with time and are the prevalent population at the end of the trial at 24 °C, in all culture conditions.TEM reveals the presence of normal, necrotic-like and apoptotic-like forms; these latter forms increase with time according to salt concentration and temperature. Initially, a detachment of the external membrane appears, with cytoplasmic clumping into small, dense masses; as the process continues, both these features become more evident with increasing salt concentrations. This behaviour has been compared to that of eukaryotic cells undergoing growth factor deprivation-induced apoptosis. Occasionally, surface blebs are observed.In conclusion, the study suggests that the exposure of A. hydrophila to stressful conditions (osmolarity, temperature and nutrients) leads to the generation of varying morphotypes, which promote cell survival in adverse conditions and a rapid repopulation in post-stress environments.     

Modeling of Rocks and Cement Alteration due to CO<Subscript>2</Subscript> Injection in an Exploited Gas Reservoir

The injection of CO₂ in exploited natural gas reservoirs as a means to reduce greenhouse gas (GHG) emissions is highly attractive as it takes place in well-known geological structures of proven integrity with respect to gas leakage. The injection of a reactive gas such as CO₂ puts emphasis on the possible alteration of reservoir and caprock formations and especially of the wells’ cement sheaths induced by the modification of chemical equilibria. Such studies are important for injectivity assurance, wellbore integrity, and risk assessment required for CO₂ sequestration site qualification. Within a R&D project funded by Eni, we set up a numerical model to investigate the rock–cement alterations driven by the injection of CO₂ into a depleted sweet natural gas pool. The simulations are performed with the TOUGHREACT simulator (Xu et al. in Comput Geosci 32:145–165, 2006) coupled to the TMGAS EOS module (Battistelli and Marcolini in Int J Greenh Gas Control 3:481–493, 2009) developed for the TOUGH2 family of reservoir simulators (Pruess et al. in TOUGH2 User’s Guide, Version 2.0, 1999). On the basis of field data, the system is considered in isothermal (50°C) and isobaric (128.5 bar) conditions. The effects of the evolving reservoir gas composition are taken into account before, during, and after CO₂ injection. Fully water-saturated conditions were assumed for the cement sheath and caprock domains. The gas phase does not flow by advection from the reservoir into the interacting domains so that molecular diffusion in the aqueous phase is the most important process controlling the mass transport occurring in the system under study.