Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Divisibility of certain $$\ell $$ -regular partitions by 2

The Ramanujan Journal - For a positive integer $$\ell $$ , let $$b_{\ell }(n)$$ denote the number of $$\ell $$ -regular partitions of a nonnegative integer n. Motivated by some recent conjectures...     

Ultraviolet absorption and vibrational spectra of 2-fluoro-5-bromopyridine

The ultraviolet absorption spectrum in the range 340-185 nm in the vapour and solution phase has been measured for 2-fluoro-5-bromopyridine. Three fairly intense band systems identified as the pi* <-- pi transitions II, III and IV have been observed. A detailed vibronic analysis of the vapor and solution spectra is presented. The first system of bands is resolved into about sixty-two distinct vibronic bands in the vapour-phase spectrum. The 0,0 band is located at 35944 cm(-1). Two well-developed progressions, in which the excited state frequencies nu'25 (283 cm(-1)) and nu'19 (550 cm(-1)) are excited by several quanta, have been observed. The corresponding excited state vibrational and anharmonicity constants are found to be omega'i = 292 cm(-1), x'ii = 4.5 cm(-1) (i = 25) and omega'i = 563.8 cm(-1), x'ii = 6.9 cm(-1) (i = 19). The other two band systems show no vibronic structure, the band maxima being located at 48346 and 52701 cm(-1), respectively. The oscillator strength of the band systems in different solutions and the excited state dipole moments associated with the first two transitions have been determined by the solvent-shift method. The infrared spectrum in the region 4000-130 cm(-1) and the laser Raman spectrum of the molecule in the liquid state have been measured and a complete vibrational assignment of the observed frequencies is given. A correlation of the ground and excited state fundamental frequencies observed in the UV absorption spectrum with the Raman or infrared frequencies is presented.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Small and large signal analysis using circuit model of InGaAs/InP based uni-travel carrier photodiode

An equivalent circuit model of uni-traveling carrier photodiode (UTC-PD) is developed from integral carrier density rate equation and few important properties of the device such as the electrical and optical characteristics are evaluated by employing advanced device physics. Circuit model incorporates chip and package parasitic of the device quite simply to provide practical behaviour of UTC-PD. We have developed small signal ac circuit model which is useful for the analysis of low power modulation characteristics of the device and dc circuit model which is advantageous to find wavelength dependent responsivity fairly accurately. At high optical input power the device bandwidth is found to be increased through enhancement of self-induced field in the absorption region and high output power can be derived from the device when absorption width is large. Such condition calls for large signal analysis. We have developed large signal circuit model by combining few mathematical transformations with small signal circuit model with different circuit element values. Our large signal model is unique that the same circuit can be used for both small and large signal analysis. With large signal model the optical power induced bandwidth improvement and output photocurrent saturation are explained. Large signal model is validated through linearity and IP3 analysis which found close agreement with the measured results.     

One-Pot Oxidation of Alanine and Its Ethyl Ester with a Mild Oxidant 4′-Methylazobenzene-2-sulfenyl Bromide

One-pot oxidation of alanine and its ethyl ester with a mild oxidant 4′-methylazobenzene-2-sulfenyl bromide is described. Using a nonreactively water-soluble electrophilic species, 4′-methylazobenzene-2-sulfenyl bromide, with L-alanine and its ethyl ester (in 3:1 molar proportions) in aqueous solution at room temperature, the corresponding sulfenimines are prepared. On hydrolysis in acidic medium at room temperature, these sulfenimines give ethanal and pyruvic acid respectively.

Rapid determination of enantiomeric excess of α-chiral aldehydes using circular dichroism spectroscopy

A method for enantiodiscrimination of α-chiral aldehydes is reported. The method utilizes circular dichroism (CD) spectroscopy and a sensing ensemble composed of 2-(1-methylhydrazinyl) pyridine (1) and Fe(II)(TfO)₂. Aldehydes react rapidly with hydrazine (1) to form chiral imines, which form complexes with Fe(II). By monitoring the CD bands above 320 nm, one can determine the enantiomeric excess (ee) values of α-chiral aldehydes with an average absolute error of ±5%. The analysis was fast, and thus can have potential applications in high-throughput screening (HTS) of catalytic asymmetric induction.