Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Symmetric Markov chains in ℤd: How fast can they move?

Summary Consider a reversible Markov chain X _n which takes values in a subset of ^d. If the steps of the chain are uniformly bounded and the invariant measure satisfies a mild regularity condition, Varopoulos, Carne and Kesten have obtained estimates on \lambda n^{1/2} )$$ " align="middle" border="0"> which exhibit a Gaussian tail in but blow up as n. Following Kesten's approach we derive bounds which are uniform in n in some special cases. Our main result, however, is an example which shows that in general the estimates of Varopoulos, Carne and Kesten are essentially best possible.Research partially supported by an S.E.R.C. (U.K.) visiting fellowship and an operating grant from N.S.E.R.C. of Canada     

Strong, low-energy two-photon absorption in extended amine-terminated cyano-substituted phenylenevinylene oligomers

Three quadrupolar oligophenylenevinylenes with five rings in the conjugated backbone, terminal donor groups, and various acceptors and/or donors along the backbone were synthesized and their two-photon spectroscopic properties investigated. These chromophores exhibit large two-photon absorption cross sections over a wide wavelength range and two distinct peaks, the strongest of which (deltamax > 3600 GM) is observed at 960-970 nm, a wavelength close to twice the value of the linear absorption maximum (2lambda(1)max). The findings on these chromophores are compared with those for analogous molecules with shorter conjugation length, for which the main two-photon band is at significantly shorter wavelength than 2lambda(1)max.     

Pentalene complexes of group 7 metal carbonyls: an organometallic mixed-valence system with very large metal-metal electronic coupling

The bimetallic complexes [M(CO)(3)](2)(mu:eta(5):eta(5)-Pn) (Pn = pentalene, C(8)H(6); M = Mn, Re) have been synthesized and characterized crystallographically; the Mn compound was isolated as solely the anti-isomer, while the Re analogue was formed as a mixture of anti- and syn-isomers. [Mn(CO)(3)](2)(mu:eta(5):eta(5)-Pn) may be reduced chemically to its mono- and dianions; the mixed-valence Mn(I)/Mn(0) monoanion is shown by ESR, vibrational, and electronic spectroscopies to be a Robin-Day class III system with an exceptionally large electronic coupling between the metal centers.     

Scanning tunneling microscopy study of the structure and orbital-mediated tunneling spectra of cobalt(II) phthalocyanine and cobalt(II) tetraphenylporphyrin on au(111): mixed composition films

Binary thin films of cobalt(II) phthalocyanine (CoPc) and cobalt(II) tetraphenylporphyrin (CoTPP) were prepared at submonolayer coverage on Au(111)/mica substrates byvapor deposition. All sample preparation and analysis were done under an ultrahigh vacuum. Scanning tunneling microscopy (STM) constant-current images of CoPc/CoTPP mixtures showed two close-packed surface structures, with different compositional percentages and some disorder. CoPc was also observed exclusively in one-dimensional chains and as single, isolated molecules below 220 K. Occupied and unoccupied orbital energy levels were identified by STM and tunnel-diode-based orbital-mediated tunneling spectroscopy. Occupied energy levels were also confirmed by ultraviolet photoelectron spectroscopy. The transient oxidation of the Co d(z2) orbital is identified in STM dI/dV(V) curves just negative of the 0 V sample bias for both molecules. Nearly identical constant-current contours are observed over the central Co2+ ions of CoTPP and CoPc, indicating that the attenuation of the d(z)2 orbital-mediated tunneling current induced by the structure of TPP relative to Pc is at most a factor of about 10. The orbital-mediated tunneling spectra of CoTPP and CoPc are distinctly different and allow these structurally similar species to be differentially identified.     

Terminal anhydride functionalization of polystyrene

Polystyrene chains with terminal anhydride groups were synthesized by direct chain transfer reaction between poly(styryl) lithium and trimellitic anhydride chloride (TMAC) and by the alkoxy-de-halogenation reaction between TMAC and hydroxy terminated polystyrene. Pyridine was used as a catalyst for these nucleophilic substitution reactions. For the direct reaction a poly(styryl) lithium with M?_n ～ 1000 (a low MW was used for characterization purposes) was prepared in an argon purged reactor and then introduced into an excess of trimellitic anhydride chloride. Due to the nature of our reaction system, the molecular weight distributions obtained were broader than those possible using more stringent high vacuum techniques. Hydroxy terminated polystyrenes with M?_n = 3,000 and 13,000 obtained elsewhere were used for the indirect addition of terminal anhydride groups. ¹H-NMR spectroscopy, gel permeation chromatography (GPC), and FTIR spectroscopy were used to characterize the reaction products. A maximum yield of 61% for the direct functionalization route and 85% for the indirect functionalization route using hydroxyl terminated polystyrene were achieved. The higher yield of the indirect method seems to be the result of the relatively mild reactivity of the hydroxyl group.