Phase transitions and hindered rotation in dimethylacetylene at high pressures probed by Raman spectroscopy

We present Raman spectroscopy experiments in dimethylacetylene (DMA) using a sapphire anvil cell up to 4 GPa at room temperature. DMA presents phase transitions at 0.2 GPa (liquid to phase I) and 0.9 GPa, which have been characterized by changes in the Raman spectrum of the sample. At pressures above 2.6 GPa several bands split into two components, suggesting an additional phase transition. The Raman spectrum of the sample above 2.6 GPa is identical to that found for the monoclinic phase II (C2/m) at low temperatures, except for an additional splitting of the band assigned to the fourfold degenerated asymmetric methyl stretch. The global analysis of the Raman spectra suggests that the observed splitting is due to the loss of degeneracy of the methyl groups of the DMA molecule in phase II. According to the above interpretation, crystal phase II of DMA extends from 0.9 GPa to pressures close to 4 GPa. Between 0.9 and 2.6 GPa, the methyl groups of the DMA molecules rotate almost freely, but the rotation is hindered on further compression.     

Refractive index of benzene and methyl derivatives: temperature and wavelength dependencies

Measurements of the refractive index from 288 to 318 K at five fixed wavelengths, from 656.3 to 404.7 nm, are reported for benzene, toluene (methylbenzene), o-xylene (1,2-dimethylbenzene), m-xylene (1,3-dimethylbenzene), and p-xylene (1,4-dimethylbenzene). We also report the temperature and wavelength dependencies of the refractive index obtained from a least-squares routine. The agreement between the measured and calculated refractive indices lies within the experimental uncertainty.     

Effects of high pressure on unsaturated fatty acids

The objective of this study is to investigate the effects of high pressure processing on the molecular structure of some unsaturated fatty acids. Samples of elaidic acid, linoleic acid, ZE and EE conjugated linoleic acid are treated at 293 or 333?K at pressures up to 700?MPa. It is observed that the adiabatic heat generated from compression is able to bring the sample temperature above 373?K after 700?MPa. These relatively extreme conditions are of great interest for food sterilization, but they may induce undesirable change in fatty acid quality characteristics. To check for structural changes, Raman spectra of the samples are analysed after treatments. The comparison with Raman spectra of samples kept at atmospheric pressure shows that pressure induces some conformational changes at the hydrocarbon skeleton in solid samples, while the liquid ones remain unchanged. No cis/trans isomerization occurs, but gauche conformers are likely to be present.     

Structure, metastability, and electron density of Al lattices in light of the model of anions in metallic matrices

This paper reports a theoretical investigation of the structure, stability, and electron charge density of cubic, rhombohedral, hexagonal, and monoclinic Al lattices. The equations of state and the elastic constants are computed from total energy calculations at different volumes and unit cell strains using the density functional theory approximation. The topology of the electron density is analyzed within the crystalline implementation of the atoms in molecules formalism. The results are discussed in light of the so-called anions in metallic matrices model, which permits the interpretation of the chemical bonding and the explanation of the existence of particular symmetries of inorganic crystals. First, the Al sublattices are identified as the reference building blocks of AlX(3) (X = F, Cl, OH) compounds. The calculations reveal that the equilibrium zero-pressure Al-Al shortest distance is around 2.75 A in all of the Al matrixes, similar to the value observed in the stable face centered cubic structure of Al at room conditions. Second, at their zero-pressure equilibrium geometries, the Al sublattices are found to fulfill the mechanical stability criteria or, alternatively, to show mechanical instabilities that are compatible with the distortions observed for the structures in AlX(3) crystals. However, at the equilibrium volumes of the AlX(3) crystals, all of the Al matrices violate the spinodal condition, and the cohesion and stabilization are provided by the nonmetallic X atoms. Third, the structural anisotropy of the Al sublattices seems to be the main factor to discriminate metallic matrices able to host nonmetallic elements. The inhomogeneities of the electron charge density, which favor the arrival of nonmetallic elements and the crystal formation, are notably enhanced in passing from the fcc structure of pure Al to the less isotropic Al matrices observed in AlX(3) compounds.     

Application of Raman microscopy to the characterization of different verdigris variants obtained using recipes from old treatises

Verdigris is an historical pigment of synthetic origin widely used in the artistic scope, from the antiquity to beginning of 19th century. It is a greenish or green-bluish colored product resulting from corrosion of pure copper and alloys caused by the action of different chemical reagents. The preparation recipes are numerous and appear in old texts, such as: treatises of art and texts of alchemy, as well as in books of secrets, natural history and those concerning medicines. A comparative study of these recipes shows significant differences depending on the initial components and the methodology applied in the synthesis of the pigment. Consequently, typical verdigris pigments very likely correspond to a variety of chemical compositions and, in addition, it might contain certain amounts of unknown by-products. To confirm such hypothesis, four different preparation recipes of verdigris have been carefully reproduced in our laboratory, and characterized by Raman microscopy. Our experiments allowed us to establish interesting differences among the studied samples. Some differences are mostly related to the ingredients used in the elaboration of the so-called raw verdigris. In other cases, the observed variations are consequence of the recrystallization treatment of the pigment. In general, all spectra reveal the existence of common component, namely, the copper(II) acetate (hydrated or anhydrous). However, other minority components have been detected in our samples, for instance, copper oxides, copper chlorides, and ammonic salts. In some cases, these compounds allow us to deduce the type of recipe used in the elaboration of the pigment.     

n-pentanol at high pressures: rotational isomerism in the liquid phase and the liquid-solid phase transition

The vibrational spectrum of liquids constituted of chain molecules is difficult to analyze because it may have contributions of different rotational isomers. In turn, with a proper vibrational assignment, this feature allows us to extract information about the effect of temperature or pressure on the molecular conformations in the liquid state. In this regard, the information on the vibrational spectrum in the solid phase greatly simplifies the vibrational analysis of the different rotational conformers existing in the liquid, as the molecules usually present all-trans conformations in the crystalline state. Here we report room-temperature Raman experiments on n-pentanol performed in a sapphire-anvil cell up to 3 GPa. A detailed analysis of the liquid-solid phase transition occurring at 1.3 GPa is provided. The analysis of the Raman spectrum in the solid phase allows the identification of the bands due to the different rotational isomers present in the liquid. The analysis of the spectral region corresponding to skeletal vibrations of the carbon chain (800-1200 cm(-1)) indicates that gauche conformers are promoted by the application of pressure. The analysis of the intensity ratio of those bands assigned to trans and gauge conformations is used to calculate the change in molecular volume ascribed to the trans-gauge isomerization process. We find a value similar to that found in n-alkanes, i.e., -0.88 cm(3) mol(-1). In addition, we find indication that pressure varies the proportions of the different gauge conformers. Thus, it appears that the GTTt to TGTt transition in the carbon chain is favored at high pressures. As expected, a smaller change in the molecular volume accompanies this conformation change.     

Stress‐dependent correlations for resonant Raman bands in graphite with defects

We have studied the Raman features characteristics of defects generated in graphite under high stress conditions. Defects are generated in pristine highly oriented pyrolytic graphite by squeezing the samples in a high‐pressure anvil cell and monitored in situ by Raman spectroscopy. On the basis of our Raman measurements and existing literature correlations, we conclude that vacancies and grain boundaries are generated during compression–decompression cycles, being the defects mostly generated during the decompression stage. Our results demonstrate that the relative intensities of the D, D′, and (D + D′) bands are strongly correlated. Which is important for practical application of Raman spectroscopy in the characterization of carbon materials is that such correlations are essentially constant over the whole stress range covered in the experiments (~7 GPa). An additional interesting result concerns the relative intensities of the denoted 2D₁ and 2D₂ contributions, which are correlated with the intensity of the G band; the intensity ratio between both features is modified by stress indicating that the stress affects the stacking order of pristine graphite. Finally, we find that the decrease in intensity of the 2D₂ band with decreasing crystallite size found in existing studies on unstrained graphite remains under stress conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Shape resonances in slow electron scattering by aromatic molecules. I. Anthraquinone derivatives

A series of anthraquinone (C(14)O(2)H(8)) derivatives has been studied by means of electron capture negative ion mass spectrometry (ECNI-MS), photoelectron spectroscopy (PES), and AM1 quantum chemical calculations. Mean lifetimes of molecular negative ions M(-.) (MNI) have been measured. The mechanism of long-lived MNI formation in the epithermal energy region of incident electrons has been investigated. A simple model of a molecule (a spherical potential well with the repulsive centrifugal term) has been applied for the analysis of the energy dependence of cross sections at the first stage of the electron capture process. It has been shown that a temporary resonance of MNI at the energy approximately 0.5 eV corresponds to a shape resonance with lifetime 1-2.10(-13) s in the f-partial wave (l = 3) of the incident electron. The next resonant state of MNI at the energy approximately 1.7 eV has been associated with the electron excited Feshbach resonance (whose parent state is a triplet npi* transition). In all cases the initial electron state of the MNI relaxes into the ground state by means of a radiationless transition, and the final state of the MNI is a nuclear excited resonance with a lifetime measurable on the mass spectrometry timescale. Copyright 1999 John Wiley & Sons, Ltd.     

Electrospray ionization multiple-stage tandem mass spectrometric analysis of diglycosyldiacylglycerol glycolipids from the bacteria Bacillus pumilus

Electrospray ionization (ESI) combined with multiple-stage tandem mass spectrometry (MS(n)) was used to directly analyze the glycolipid mixture from bacteria Bacillus pumilus without preliminary separation. Full scan ESI-MS revealed the composition of picomole quantities of glycerolglycolipid species containing C(14)-C(19) fatty acids, some of which were monounsaturated. Two main components were identified from their molecular masses and fragmentation pathways. The fragmentation pathway of the known compound compared with the investigated compound verified the proposed structure as 1(3)-acyl-2-pentadecanoyl-3(1)-O-[beta-D-glucopyranosyl-(1-->6)-O-beta-D-glucopyranosyl]-sn-glycerols. A comparison of the multiple tandem mass spectra of the different alkali-metal cation adducts indicates that the intensity of fragments and the dissociation pathways are dependent on the alkali-metal type. The basic structures of glycerolglycolipids were reflected clearly from the fragmentation patterns of the sodium cations. The intense fragments of the sugar residue from the precursor ions were obtained from the lithiated adduct ions. ESI-MS(n) spectra of [M + K](+) ions did not provide as much fragmentation as [M + Na](+) and [M + Li](+) adducts, but their spectra allow the position of glycerol acylation to be determined. On the basis of MS(2) spectra of [M + K](+) ions, it was established that all components have a C(15:0) fatty acid at the sn-2 position of the glycerol backbone and C(14)-C(19) acids at the sn-1 position of the glycerol backbone. Copyright 1999 John Wiley & Sons, Ltd.     

Analysis of a shielded TE011 mode composite dielectric resonator for stable frequency reference

Analysis of a TE₀₁₁ mode composite sapphire-rutile dielectric resonator has been carried out to study the temperature variation of resonance frequency, close to the Cs atomic clock hyperfine frequency of 9.192 GHz. The complementary behavior of dielectric permittivity with temperature of the composite has been exploited to obtain the desired turning point in the resonant frequency. The frequency of the composite structure is found to be independent of the shield diameter beyond four times the puck diameter.