Homolytic telomerization of vinyltrimethylsilane with 5,5-dimethyl-1,3-dioxane

The homolytic telomerization of vinyltrimethylsilane by 5,5-dimethyl-1,3-dioxane follows three principal routes, with the formation of 2- and 4-substituted 5,5-dimethyl-1, 3-dioxanes and a formate ester. The rings in the reaction products (2-trimethylsilylethyl- and 4-trimethylsilylethyl-5,5-dimethyl-1,3-dioxane) exist in the chair conformation. The substituants in the 2- and 4-positions of the dioxane ring occupy equatorial positions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1031–1035, August, 1986.     

The Effect of Modification on the Structural,Acidic, and Catalytic Properties of a Layered Aluminosilicate

The effect of modification on the structural, acidic, and catalytic properties of a natural layered aluminosilicate containing 90% montmorillonite was studied. With the use of low-temperature nitrogen adsorption and XRD analysis, it was found that the addition of hydroxo complexes of aluminum prevents the silicate layers of the layered aluminosilicate from closing upon heating and results both in the formation of stable micropores and in a considerable increase in the specific surface area. The acidic properties of the H, Na, and Al forms of the layered aluminosilicate were studied by IR spectroscopy of adsorbed CO molecules and by the indicator method. After modification with hydroxo complexes of aluminum, the number of Lewis acid sites and the accessibility of acidic OH groups to CO adsorption increased. The total number and strength of acid sites increased as the calcination temperature of the layered aluminosilicate was increased. A correlation between catalytic activity in the reaction of acetone dimerization and the number of acid sites in different forms of the layered aluminosilicate was obtained.     

Phase formation in the Dy2O3-HfO2-MoO3 system. Crystal structure of the new binary molybdate Dy2Hf2(MoO4)7

Phase relations have been studied for the subsolidus region of the Dy₂O₃-HfO₂-MoO₃ system; binary molybdates, Dy₂Hf(MoO₄)₅ and Dy₂Hf₂(MoO₄)₇, were found to form. The crystal structure of the latter has been solved (a = 20.661(3) , b = 9.816(1) , c = 13.796(3) , = 113.47(1)°, Z = 4, space group C2/c, R = 0.023) and found to be a new type of structure. In the structure, MoO₄ tetrahedra are linked by their vertices with HfO₆ octahedra and DyO₈ tetragonal antiprisms to form a 3D open-work, in which one can isolate double-row tetrahedral and octahedral chains extended down the c axis.Original Russian Text Copyright © 2004 by S. F. Solodovnikov, B. G. Bazarov, E. Yu. Badmaeva, Yu. L. Tushinova, E. S. Zolotova, and Zh. G. BazarovaTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 692–697, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Photopolymerization kinetics of monolayer and bilayer Langmuir-Blodgett films of acetylenic acid salts

The photopolymerization of thin (monolayer and bilayer) Langmuir-Blodgett films of the lead salt of 2-docosynoic acid (CH₃(CH₂)₁₈C≡CCOOH, DCA), with a triple bond near the carboxylic group, and the lead salt of 23-tetracosynoic acid (HC≡C(CH₂)₂₁COOH, TCA), with a triple bond far from the carboxyl group, has been investigated by IR spectroscopy. The principal distinctions between the polymerization kinetics of the DCA salt and that of the TCA salt are observed for bilayers. It is hypothesized that the perfection of the molecular packing in the bilayers is governed by the interlayer interaction of carboxyl groups, which exerts a stronger effect on the mutual orientation of the triple bonds in the DCA salt films as compared to the TCA salt films. A model is suggested for describing the kinetics of the two-dimensional photopolymerization of monoacetylenic compounds. A comparison between simulated and experimental data for the monolayer films demonstrates that the observed saturation of conversion (α) as a function of the UV exposure time (t) at the α ≈ 0.5?0.6 level can be attributed to the fact that the intermolecular distance lengthens with local film densification during polymerization. The effects of the substrate and the orientation of molecules in the layer on α (t) is reported.     

Optical anisotropy of Langmuir-Blodgett films of long-chain acetylenic acids

The optical anisotropy of Langmuir-Blodgett films, along with its variation in the course of polymerization under UV radiation, is studied by ellipsometry at a fixed wavelength of 632.8 nm for several angles of incidence of light. Films of the Cd and Pb salts of acetylenic acids with internal and terminal triple bonds—HC≡ C(CH₂)₂₁COOH (I) and CH₃(CH₂)₁₈C≡CCOOH (II)—are studied. The refractive indices and thicknesses of the films are determined on the basis of a model of a biaxial anisotropic film. It is found that the films of the Pb salt of acid II are biaxial, while the films of the Cd salt of acid II and of the Cd and Pb salts of acid I have nearly uniaxial anisotropy. The calculated thicknesses of monolayers coincide with the thicknesses determined from small-angle x-ray scattering. The anisotropy of the films is shown to vary under UV irradiation. After polymerization of the films, the anisotropy in the plane of the layer virtually vanishes, while that in the direction perpendicular to the interface is retained.     

IR and Raman spectroscopic study of the photopolymerization of Langmuir-Blodgett films of acetylenic acids

The UV induced photopolymerization of Langmuir-Blodgett films of lead salt of 2-docosynoic acid (CH₃(CH₂)₁₈C=CCOOH) is studied using IR and Raman spectroscopy. It is found that the films are a highly ordered system with trans-configuration of alkyl chains and a bridged complex generated between the carboxyl group and the lead ion. Based on a change in the absorption band intensity in the IR spectra corresponding to the triple bond vibration, the degree of polymerization depending on the irradiation time is determined. In the Raman spectra, a peak at ∼1635 cm⁻¹ appears during polymerization, which corresponds to the C=C double bond. The formation of conjugated double bonds in these systems is observed for the first time. During polymerization, methylene chains of molecules retain trans-configuration; the structural ordering of molecules in the film is observed.     

Interaction of Langmuir–Blodgett Layers Bearing Amino Groups with Sulfur Dioxide

The adsorption of SO₂ on thin Langmuir–Blodgett layers of long-chain molecules containing tertiary amino groups is studied by the polarization method. The study was performed at room temperature using 10- to 25-nm-thick layers in the SO₂ concentration range of 100–3000 mg/m³. It is shown that the amount of the adsorbed sulfur dioxide is proportional to its concentration in the gas phase.     

Adsorption of Triarylmethane Dye on Ca-Montmorillonite: Equilibrium,Kinetics, and Thermodynamics

The equilibrium, kinetics, and thermodynamics of adsorption of triarylmethane dye, crystalline violet, from aqueous solutions on Ca-montmorillonite have been studied. The regularities of the influence of the physicochemical parameters (suspension pH, clay and dye concentrations, temperature, and contact time) on the specific adsorption value of the dye have been found. It has been shown that Ca-montmorillonite is capable of removing the dye from aqueous solutions in a wide range of concentrations with an efficiency of up to 99.8%. The adsorption of crystalline violet obeys the Langmuir model (the correlation coefficient is 0.999), which corresponds to monolayer adsorption on a homogeneous surface. The kinetics of dye adsorption is described by a pseudo-second-order equation, which is characteristic of chemisorption. The thermodynamic parameters of adsorption, ΔH = 40.42 kJ/mol, ΔS = 139.6 J/mol, and ΔG =–4.68 kJ/mol (323 K), have been determined and lead to the conclusion that the dye adsorption is a spontaneous endothermic process.     

Investigation into the structure of Langmuir-Blodgett films prepared from salts of acetylenic acids

Langmuir-Blodgett films are prepared from lead, cadmium, and copper salts of carboxylic acids, namely, 23-tetracosynoic acid HC≡C(CH₂)₂₁COOH (with the terminal triple bond) and 2-docosynoic acid CH₃(CH₂)₁₈C≡CCOOH (with the internal triple bond). The structural transformations in the films during polymerization under exposure to UV radiation are investigated using X-ray reflectomertry. It is found that the X-ray reflectograms of the initial films prepared from salts of both acids exhibit no less than four or five pronounced intense Bragg reflections. This suggests that the initial films have good layer ordering. The bilayer periods for all the films are determined, and the influence of the salt type on the bilayer period is analyzed. It is established that, under exposure to UV radiation, the structural transformations in the films prepared from the salts of 23-tetracosynoic acid occur without substantial disturbances and defects, as can be judged from the absence of significant changes in the location and intensity of the Bragg reflections. An increase in the time of irradiation of the films prepared from the salts of 2-docosynoic acid leads to an increase in the bilayer period. This effect is especially pronounced for the lead and copper salts. However, upon long-term exposure to UV radiation, the salts undergo photolysis, the bilayer period decreases, and the structure of the film begins to break down.