Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Two isomeric butadiene–N‐(acetoxy­phenyl)maleimide Diels–Alder adducts: supramolecular structure directed by C—H⋯X (X = O and π) hydrogen bonds and perpendicular dipole carbonyl–carbonyl inter­actions

The mol­ecular and supramolecular structures of 2‐(1,3‐dioxo‐2,3,3a,4,7,7a‐hexa­hydro‐1H‐isoindol‐2‐yl)phenyl acetate, C₁₆‐H₁₅NO₄, (I), and its para isomer, 4‐(1,3‐dioxo‐2,3,3a,4,7,7a‐hexa­hydro‐1H‐isoindol‐2‐yl)phenyl acetate, (II), are reported. The torsion angle between the succinimide and benzene rings depends on the position of the acet­oxy substitution [89.7 (1) and 61.9 (1)° for (I) and (II), respectively]. The twist of the acet­oxy group relative to the mean plane of the benzene ring is almost independent of the acet­oxy position [66.0 (1) and 70.0 (1)°]. Packing inter­actions for both compounds include soft C—H⋯X (X = O and Ph) inter­actions, forming chains of centrosymmetric dimers and inter­linked chains for (I) and (II), respectively. In addition, three perpendicular dipole C=O⋯C=O inter­actions contribute to the supramolecular structure of (II).     

Photoconductive semiconductor switches

Optically activated GaAs switches operated in their high-gain mode are being used or tested for pulsed power applications as diverse as low-impedance, high-current firing sets in munitions; high impedance, low-current Pockels cell or Q-switch drivers for lasers; high-voltage drivers for laser diode arrays; high-voltage, high-current, compact accelerators; and pulsers for ground penetrating radar. This paper will describe the properties of high-gain photoconductive semiconductor switches (PCSS), and how they are used in a variety of pulsed power applications. For firing sets, we have switched up to 7 kA in a very compact package. For driving Q switches, the load is the small (30 pF) capacitance of the Q switch which is charged to 6 kV. We have demonstrated that we can modulate a laser beam with a subnanosecond rise time. Using PCSS, we have demonstrated gain switching a series-connected laser diode array, obtaining an optical output with a peak power of 50 kW and a pulse duration of 100 ps. For accelerators, we are using PCSS to switch a 260 kV, 60 kA Blumlein. A pulser suitable for use in ground-penetrating radar has been demonstrated at 100 kV, 1.3 kA. This paper will describe the specific project requirements and switch parameters in all of these applications, and emphasize the switch research and development that is being pursued to address the important issues     

On the structural and magnetoelectrical characterization of epitaxial SrRuO3 thin films grown on (001) SrTiO3 substrates

High-quality epitaxial thin films of the ferromagnetic metallic oxide SrRuO₃ (SRO) were fabricated by dc-sputtering at high oxygen pressure and their structural and magnetoelectrical properties were carefully studied. The films featured a Curie temperature T_C ～ 160 K and a magnetic moment of ～0.7 μ_B per Ru ion. The temperature dependent magnetization could be well described by the scaling relation M(T) ∝ (T_C ? T)^β with a critical exponent β = 0.53 over the entire ferromagnetic temperature range. A negative magnetoresistance, MR, on the order of a few percent was found up to room temperature. MR showed a maximum of ～4% right at T_C where a kink structure of the resistivity, ρ, at zero field was flattened out on magnetic field application. This ρ contribution could be related to scattering due to orientational disorder of the Ru magnetic moments which become aligned by an external magnetic field. In addition, an equally strong MR effect, related to localization phenomena, could be observed at lower temperature. Particularly, the second MR peak at ～35 K might be related to a Fermi-liquid to non-Fermi-liquid crossover. A scaling behavior dρ/dT ∝ |T ? T_C|^α was observed only above T_C. Here, values for the exponent α ≈ ?0.4 and α ≈ ?1.4 were obtained in zero field and in a field of 9 T, respectively. The commonly observed ρ minimum, appearing at low temperatures (～3 K in the present case), is correlated with the structural disorder of the SRO films and is believed to have its origin in quantum corrections to the conductivity (QCC).     

Heterometallic hexanuclear isobutyrate clusters based on di- and tripodal alcohols

Four hexanuclear coordination clusters containing $\{{\mathrm{M}}_4^{\mathrm{II}}{\mathrm{M}}_2^{\mathrm{III}}\}$ cores of edge-sharing coordination octahedra exemplify how mixed-spin derivatives of a homonuclear parent structure, [${\mathrm{Mn}}_4^{\mathrm{II}}{\mathrm{Mn}}_2^{\mathrm{III}}{\mathrm{L}}_8$(N–O)₄], can be realized by a ligand ‘shrink-wrapping’ approach, resulting in [${\mathrm{Mn}}_2^{\mathrm{II}}{\mathrm{Co}}_2^{\mathrm{II}}{\mathrm{Mn}}_2^{\mathrm{III}}{\mathrm{L}}_8$(N–O)₄]- and [${\mathrm{Co}}_4^{\mathrm{II}}{\mathrm{Fe}}_2^{\mathrm{III}}{\mathrm{L}}_8$(N-O)₄]-type clusters (L = isobutyrate, N–O = methyldiethanolamine, n-butyldiethanolamine, or triethanolamine). The resulting core structures are either virtually isostructural to the parent structure or differ in the placement of the peripheral metal ions, depending on the mix of structure-directing carboxylate and alkoxyamine ligands with large, flexible alkyl chains. Whereas the $\{{\mathrm{Mn}}_4^{\mathrm{II}}{\mathrm{Mn}}_2^{\mathrm{III}}\}$ and {${\mathrm{Co}}_4^{\mathrm{II}}{\mathrm{Fe}}_2^{\mathrm{III}}$} complexes show dominant antiferromagnetic exchange, ferrimagnetic coupling features are exhibited by two {${\mathrm{Mn}}_2^{\mathrm{II}}{\mathrm{Co}}_2^{\mathrm{II}}{\mathrm{Mn}}_2^{\mathrm{III}}$} clusters.     

Determining membrane capacitance by dynamic control of droplet interface bilayer area

By making dynamic changes to the area of a droplet interface bilayer (DIB), we are able to measure the specific capacitance of lipid bilayers with improved accuracy and precision over existing methods. The dependence of membrane specific capacitance on the chain-length of the alkane oil present in the bilayer is similar to that observed in black lipid membranes. In contrast to conventional artificial bilayers, DIBs are not confined by an aperture, which enables us to determine that the dependence of whole bilayer capacitance on applied potential is predominantly a result of a spontaneous increase in bilayer area. This area change arises from the creation of new bilayer at the three phase interface and is driven by changes in surface tension with applied potential that can be described by the Young-Lippmann equation. By accounting for this area change, we are able to determine the proportion of the capacitance dependence that arises from a change in specific capacitance with applied potential. This method provides a new tool with which to investigate the vertical compression of the bilayer and understand the changes in bilayer thickness with applied potential. We find that, for 1,2-diphytanoyl-sn-glycero-3-phosphocholine membranes in hexadecane, specific bilayer capacitance varies by 0.6-1.5% over an applied potential of ±100 mV.     

Correction: Dermatan sulfate in tunicate phylogeny: Order-specific sulfation pattern and the effect of [→4IdoA(2-Sulfate)β-1→3GalNAc(4-Sulfate)β-1→] motifs in dermatan sulfate on heparin cofactor II activity

After the publication of the work entitled "Dermatan sulfate in tunicate phylogeny: Order-specific sulfation pattern and the effect of [→4IdoA(2-Sulfate)β-1→3GalNAc(4-Sulfate)β-1→] motifs in dermatan sulfate on heparin cofactor II activity", by Kozlowski et al., BMC Biochemistry 2011, 12:29, we found that the legends to Figures 2 to 5 contain serious mistakes that compromise the comprehension of the work. This correction article contains the correct text of the legends to Figures 2 to 5.     

Increasing the RF energy per pulse of an RKO

The Air Force Research Laboratory RKO source has recently demonstrated the ability to convert electron beam power to RF power until the termination of the electron beam pulse, achieving a power of 1.5 GW at an energy of 170 J. These results represent an increase in power of 25-30% in power and energy extracted from this source. This paper discusses the principal research areas encountered in lengthening the RF pulse (FWHM) from 50 ns to the present 120 ns and the associated increase in the RF energy