间歇式高速同步相机新型全数字化微机控制系统

本文提出了一种间歇式高速同步相机的全新设计方法，介绍了系统的工作原理，硬件，软件设计以及核心控制算法，最后给出了实际应用结果。     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

Computational and algorithmic aspects of cardinal spline-wavelets

Pascal triangles are formulated for computing the coefficients of the B-spline series representation of the compactly supported spline-wavelets with minimum support and their derivatives. It is shown that with the alternating signs removed, all these sequences are totally positive. On the other hand, truncations of the reciprocal Euler-Frobenius polynomials lead to finite sequences for orthogonal wavelet decompositions. For this purpose, sharp estimates are given in terms of the exact reconstruction of these approximate decomposed components. Research supported by NSF Grant DMS 89-0-01345 and ARO Contract No. DAAL 03-90-G-0091.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

催化荧光法测定痕量铜的研究

本文拟定了一个催化荧光法测定痕量铜的新方法,确定了该催化反应的速度方程式和反应级数。方法检测限达0.1ng Cu/ml,相对标准偏差为3.7％,具有较好的选择性,可不经分离直接用于头发样品中铜的测定,回收及对照实验结果令人满意。     

来曲唑的合成、表征及晶体研究

合成了抗癌药物4,4′-(1H-1,2,4-三唑-1-亚甲基)-双-甲苯基氰,测定了其IR, NMR和单晶结构,晶体C17H11N5属单斜晶系,空间群P21/n,晶胞参数:a=0.70300(14) nm, b=1.6170(3) nm, c=1.3360(3) nm, β=104.80(3)°, Z=4.结构解析最终一致性因子R1=0.0897.分子间通过氢键和范德华力形成超分子结构.     

Oxidative coupling of methane over Na-Mn-W/SiO2 catalyst at higher pressure

Na-Mn-W/SiO₂ catalysts were prepared and their catalytic performance for oxidative coupling of methane (OCM) was evaluated in a stainless-steel microreactor at elevated pressure. The results show that a CH₄ conversion of 15.1% with a C₂₊ selectivity of 71.8% was obtained under 750^oC, 1.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa. Moreover, 17.3% CH₄ conversion with 51.6% C₂ selectivity and 23.6% C₃-C₄ selectivity was obtained under 750^oC, 2.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa.     

三(2-苯并咪唑亚甲基)胺硝酸镍(Ⅱ)配合物的合成及结构

三（２－苯并咪唑亚甲基）胺简称ＮＴＢ与Ｎｉ（Ⅱ）的硝酸盐形成配合物Ｃ２８Ｈ３５Ｎ９Ｏ９Ｓ２Ｎｉ。本文报道其合成，红外光谱及晶体结构。该化合物为三斜晶系，空间Ｐ１↑－，ａ＝９．６５０（３），ｂ＝１２．７１６（２），ｃ＝１４．４３６Ａ，α＝１１．４６（２），β＝９１．６６（３），γ＝９７．５５（２）°，Ｖ＝１７１８（２）Ａ＾３，Ｚ＝２，Ｆ（０００）＝７９３，Ｄｃ＝１．４８ｇ／ｃｍ＾３，Ｍｒ＝７６４．１     

甲基硅羟基封端硅树脂的合成及固化性能

将甲基三氯硅烷和二甲基二氯硅烷分别与二苯基二羟基硅烷反应得到1,1,5,5-四氯-1,5-二甲基-3,3-二苯基三硅氧烷(A)和1,1,5,5-四甲基-1,5-二氯-3,3-二苯基三硅氧烷(B)。按一定比例将(A)和(B)水解缩合得到完全是甲基硅羟基封端树脂(Ⅰ)。将甲基三氯硅烷和甲基三乙酰氯基硅烷分别处理一般共水解法硅封端树脂可得到另外两种甲基硅羟基封端树脂(Ⅱ)和(Ⅲ),将树脂Ⅰ、Ⅱ、Ⅲ与一般共水解法得到的具有相同R/Si和Ph/R(R代表甲基和苯基)的树脂(Ⅳ、Ⅴ、Ⅵ)进行固化试验,结果表明,甲基-硅羟基封端树脂(Ⅰ—Ⅲ)的固化速度为共水解法制得的以苯基硅羟基封端树脂(Ⅳ—Ⅵ)固化速度的两倍以上。     

2-苯基苯并咪唑衍生物非线性光学性质的从头算研究

采用HF／6-31G^*方法优化分子构型，在此基础上用CPHF方法系统地研究了多种基团取代的2-苯基苯并咪唑衍生物的二阶非线性光学系数βvec，并对βvdc的影响因素进行了探讨，为进一步设计综合性能优良的有机非线性光学材料提供理论指导．