On Generalized Douglas–Weyl(α, β)-Metrics

In this paper, we study generalized Douglas–Weyl(α, β)-metrics. Suppose that a regular(α, β)-metric F is not of Randers type. We prove that F is a generalized Douglas–Weyl metric with vanishing S-curvature if and only if it is a Berwald metric. Moreover, by ignoring the regularity, if F is not a Berwald metric, then we find a family of almost regular Finsler metrics which is not Douglas nor Weyl. As its application, we show that generalized Douglas–Weyl square metric or Matsumoto metric with isotropic mean Berwald curvature are Berwald metrics.     

Pyridine solvated dioxouranium complex with salen ligand: Synthesis,characterization and luminescence properties

A new derivative of dioxouranium(VI) salen complex, [UO2(L)(pyridine)], where [L = N,N′-Bis(2-hydroxybenzylidene)-2,2-dimethyl-1,3-propanediamine] is synthesized and characterized by elemental analysis (C, H, N), FT-IR, ESI-MS spectrometry, UV/Vis, fluorescence, ¹H and ¹³C NMR spectroscopy and thermal gravimetric (TG) study. Furthermore, the single crystal X-ray diffraction measurements of the complex were carried out at 100 and 273 K. The crystal structure measurements revealed that the complex has distorted pentagonal bipyramidal geometry with uranium atom located at the centre and bonded to two phenoxy oxygen and two azomethine nitrogen in tetradenate fashion and one nitrogen from pyridine making it seven coordinated. In addition, the photoluminescence property of the complex was also recorded.     

A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Embedding of Dynamical Symmetry Groups U(1, 1) and U(2) of a Free Particle on AdS 2 and S 2 into Parasupersymmetry Algebra

Using two different types of the laddering equations realized simultaneously by the associated Gegenbauer functions, we show that all quantum states corresponding to the motion of a free particle on AdS ₂ and S ² are splitted into infinite direct sums of infinite-and finite-dimensional Hilbert subspaces which represent Lie algebras u(1, 1) and u(2) with infinite- and finite-fold degeneracies, respectively. In addition, it is shown that the representation bases of Lie algebras with rank 1, i.e., gl(2, C), realize the representation of nonunitary parasupersymmetry algebra of arbitrary order. The realization of the representation of parasupersymmetry algebra by the Hilbert subspaces which describe the motion of a free particle on AdS ₂ and S ² with the dynamical symmetry groups U(1, 1) and U(2) are concluded as well.     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 3—Magnesium and calcium salts

The magnesium and calcium salts of acrylic acid have been polymerised in aqueous solution using ammonium persulphate as initiator. Both polymers were also prepared by the neutralisation of poly(acrylic acid) with metal oxide in the same medium.

The thermal degradation behaviour of magnesium and calcium polyacrylate was studied using thermogravimetry (TG), differential thermal analysis (DTA) and thermal volatilisation analysis (TVA). Degradation products were investigated by IR spectroscopy, mass spectrometry and GC-MS techniques, the volatile product fraction having first been separated by subambient TVA.

The decompositions of these materials show some similarities to the behaviour of the alkali metal salts of poly(acrylic acid) and to that of the alkaline earth metal salts of poly(methacrylic acid), but there are also important differences. Acetone and carbon dioxide are the most important volatile products and, in addition, there are various other carbonyl containing products. More carbon dioxide, resulting from side group scission, is evolved from magnesium polyacrylate than from calcium polyacrylate, because of the lower thermal stability of magnesium carbonate.     

Spectrophotometric determination of isonicotinic acid hydrazide

Summary Isonicotinic acid hydrazide reacts with 2,3,5-triphenyltetrazolium chloride in acidic medium in presence of excess of thallium(III) to give a pink-coloured formazan having maximum absorption at 480 nm. This colour reaction is used to determine isonicotinic acid hydrazide in urine and blood. The reaction is specific for isonicotinic acid hydrazide, and the visual limit of identification is1 g per ml.

---

Zusammenfassung Isonikotinsäurehydrazid reagiert mit 2,3,5-Triphenyltetrazoliumchlorid in saurem Milieu bei Gegenwart von überschüssigem Thallium(III) unter Bildung eines rosa gefärbten Formazans mit dem Absorptionsmaximum bei 480 nm. Diese Farbreaktion wird zur Bestimmung von Isonikotinsäurehydrazid in Harn und Blut verwendet. Sie ist spezifisch. Ihre Erfassungsgrenze beträgt 1g/ml.

---

Résumé L'hydrazide de l'acide isonicotinique réagit avec le chlorure de triphényl-2,3,5 tétrazolium, en milieu acide en présence d'un excès de thallium-III, en donnant un formazan coloré en rose dont le maximum d'absorption se situe à 480 nm. On utilise cette réaction colorée pour doser l'hydrazide de l'acide isonicotinique dans l'urine et dans le sang. La réaction est spécifique et la limite d'identification visuelle est de 1g par ml.

     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).