Interfacial segregation in Ag-Au,Au-Pd,and Cu-Ni alloys: I. (100) surfaces

Atomistic simulations of segregation to (100) free surface in Ag–Au, Au–Pd, and Cu–Ni alloy systems have been performed for a wide range of temperatures and compositions within the solid solution region of these alloy phase diagrams. In addition to the surface segregation profiles, surface free energies, enthalpies, and entropies were determined. These simulations were performed within the framework of the free energy simulation method, in which an approximate free energy functional is minimized with respect to atomic coordinates and atomic site occupation. The effects of the relaxation with respect to either the atomic positions or the atomic concentrations are discussed. For all alloy bulk compositions (0.05 C 0.95) and temperatures (400 T(K) 1,100) examined, Ag, Au, and Cu segregates to the surface in the Ag–Au, Au–Pd, and Cu–Ni alloy systems, respectively. The present results are compared with several theories for segregation. The resultant segregation profiles in Au–Pd and Ag–Au alloys are shown to be in good agreement with an empirical segregation theory, while in Cu–Ni alloys the disagreement in Ni-rich alloys is substantial. The width of the segregation profile is limited to approximately three to four atomic planes. The surface thermodynamic properties depend sensitively on the magnitude of the surface segregation, and some of them are shown to vary linearly with the magnitude of the surface segregation.     

Solubility Data of Diazepam in Binary and Ternary Mixtures of PEGs 200 and 400 with N-Methyl Pyrrolidone and Water at 298.2 K: Experimental Data and Modeling

Experimental solubilities of diazepam in binary and ternary solvents of polyethylene glycols 200 and 400 with N-methyl pyrrolidone and water at T = 298.2 K are reported. The Jouyban–Acree model was used to fit solubility data of diazepam in the binary and ternary solvent mixtures (106 data points) in which the overall mean relative deviations (OMRD %) is 13.1 % and the prediction OMRD % is 31.7 %. The combined version of the Jouyban–Acree model with Hansen solubility parameters was used for fitting and predicting the solubility data and the OMRDs % are 10.0 and 20.8 %, respectively. Also, the previously proposed trained versions of the Jouyban–Acree model were used for predicting the reported data in this work and all results are listed in the tables. The density of the solute-free solvent mixtures were measured and employed to calculate the constants of the Jouyban–Acree model and then the densities of the saturated solutions were predicted.     

Synthesis,crystal structure,and electrochemical properties of Ni(II) and Cu(II) complexes with two unsymmetrical N2O2 Schiff base ligands

Nickel(II) and copper(II) complexes of two unsymmetrical tetradentate Schiff base ligands [Ni(Me-salabza)] (1), [Cu(Me-salabza)] (2) and [Ni(salabza)] (3), {H₂salabza = N,N′-bis[(salicylidene)-2-aminobenzylamine] and H₂Me-salabza = N,N′-bis[(methylsalicylidene)-2-aminobenzylamine]}, have been synthesized and characterized by elemental analysis and spectroscopic methods. The crystal structures of 2 and 3 complexes have been determined by single crystal X-ray diffraction. Both copper(II) and nickel(II) ions adopt a distorted square planar geometry in [Cu(Me-salabza)] and [Ni(salabza)] complexes. The cyclic voltammetric studies of these complexes in dichloromethane indicate the electronic effects of the methyl groups on redox potential.     

New Polydentate Trimethylsilyl Chalcogenide Reagents for the Assembly of Polyferrocenyl Architectures

A series of polychalcogenotrimethylsilane complexes Ar(CH₂ESiMe₃)_n, (Ar=aryl; E=S, Se; n=2, 3, and 4) can be prepared from the corresponding polyorganobromide and M[ESiMe₃] (M=Na, Li). These represent the first examples of the incorporation of such a large number of reactive ?ESiMe₃ moieties onto an organic molecular framework. They are shown to be convenient reagents for the preparation of the polyferrocenylseleno‐ and thioesters from ferrocenoyl chloride. The synthesis, structures, and spectroscopic properties of the new silyl chalcogen complexes 1,4‐(Me₃SiECH₂)₂(C₆Me₄) (E=S, 1 ; E=Se, 2 ), 1,3,5‐(Me₃SiECH₂)₃(C₆Me₃) (E=S, 3 ; E=Se, 4 ) and 1,2,4,5‐(Me₃SiECH₂)₄(C₆H₂) (E=S, 5 ; E=Se, 6 ) and the polyferrocenyl chalcogenoesters [1,4‐{FcC(O)ECH₂}₂(C₆Me₄)] (E=S, 7 ; E=Se, 8 ), [1,3,5‐{FcC(O)ECH₂}₃(C₆Me₃)] (E=S, 9 ; E=Se, 10 ) and [1,2,4,5‐{FcC(O)ECH₂}₄(C₆H₂)] (E=S, 11 illustrated; E=Se, 12 ) are reported. The new polysilylated reagents and polyferrocenyl chalcogenoesters have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ⁷⁷Se), electrospray ionization mass spectrometry and, for complexes 1 , 2 , 3 , 4 , 7 , 8 , and 11 , single‐crystal X‐ray diffraction. The cyclic voltammograms of complexes 7 – 11 are presented.     

Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV–Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10–100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.     

Anti-plane elastodynamic analysis of planes with multiple defects

The solution of a screw dislocation under time-harmonic condition is obtained in an infinite isotropic plane by means of the Fourier transform method. The stress components reveal the familiar Cauchy singularity at the location of dislocation. The solution is employed to derive integral equations for a plane weakened by cracks and cavities. Cavities are considered as closed curved cracks without singularity. Several examples are solved and the stress intensity factor of cracks and hoop stress on cavities are obtained.     

A Functionalized Ag2S Molecular Architecture: Facile Assembly of the Atomically Precise Ferrocene‐Decorated Nanocluster [Ag74S19(dppp)6(fc(C{O}OCH2CH2S)2)18]

A ferrocene‐based dithiol 1,1′‐[fc(C{O}OCH₂CH₂SH)₂] has been prepared and treated with a Ag^I salt to form the stable dithiolate compound [fc(C{O}OCH₂CH₂SAg)₂]_n (fc=[Fe(η⁵‐C₅H₄)₂]). This is used as a reagent for the preparation of the nanocluster [Ag₇₄S₁₉(dppp)₆(fc(C{O}OCH₂CH₂S)₂)₁₈] which was obtained in good yield (dppp=1,3‐bis(diphenylphosphino)propane).     

In situ forming PLGA implant for 90 days controlled release of leuprolide acetate for treatment of prostate cancer

In prostate cancer, hormone therapy via leuprolide acetate drug (LUP) is used to lower the level of testosterone down to castration level to effectively control the development of prostate cancer. The objective of this study was to evaluate the effective parameters in degradation and controlled release of an injectable in situ formed polymeric implant, loaded with leuprolide acetate, in order to achieve an optimum formulation for sustained drug release for 90 days with minimum burst release. The main problem associating with such implants is their high burst release. Designing an injectable implant with sustained and minimum burst release has thus become an attractive challenge in drug delivery field. Effects of type of poly(lactic‐co‐glycolic acid) 75:25 copolymers (RG752, RG756) and addition of nano‐hydroxyapatite (HA) particles on degradation rates of the implants and release profiles were examined in vitro and in vivo in a rabbit animal model. Results showed that implants containing polymers with higher molecular weights had significantly lower weight loss and molecular weight reduction. Adding nanoparticles of hydroxyapatite into poly(lactic‐co‐glycolic acid) implants caused further reduction in degradation rates, leading to a more sustained drug release in vivo, with reduced burst release. Different conventional kinetic models were applied to drug release and degradation data. The degradation data fit well to the first‐order degradation model. Higuchi model was the best kinetic release model fitted to the experimental in vitro release data. This study led to an optimum formulation (RG756:RG752 3:1 + 5% HA) with sustained leuprolide release and testosterone suppression over a 90‐day period with significant decrease of burst release phase (50%, p < 0.001) compared with the conventional Eligard formulation. The histopathology test showed that the formulated implant had no effects of toxicity or tissue necrosis in organs of the animal model. Copyright © 2017 John Wiley & Sons, Ltd.     

An efficient palladium catalytic system for microwave assisted cyanation of aryl halides

Application of a new catalytic system for cyanation reaction of various aryl halides using K₄[Fe(CN)₆] as cyanating source was examined. The reactions were performed under microwave irradiation and results showed that application of this catalytic system and DMF at 130 °C minimized the reaction times from hours to minutes in good to excellent yields.