The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Dendrimer Templated Synthesis of Carbon Nanotube Supported PdAu Catalyst and its Application as Hydrogen Peroxide Sensor

At present, CNT supported catalysts were prepared by two different methods as NaBH₄ reduction and dendrimer templated NaBH₄ reduction method to observe the effect of preparation method on the sensitivity and activity of H₂O₂ reduction. Then, CNT supported Pd_xAu_y bimetallic nanocatalysts having various atomic ratio were synthesized via novel dendrimer templated NaBH₄ reduction method. The resulting materials were characterized employing XRD and TEM. Crystallite size of 10 %Pd_0.7Au_0.3/CNT_dendrimer was obtained from XRD 17.1 nm and mean particle size obtained from TEM is about 15 nm. Moreover, the electrochemical behavior of these catalysts was characterized by cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Pd_xAu_y bimetallic nanocatalysts have excellent electrocatalytic properties and great potential for applications in electrochemical detection. The sensitivity and the limit of detection values for the prepared sensor with monometallic 10 % Pd/CNT_dendrimer catalysts are 219.78 μA mM^?1cm^?2 and 2.6 μM, respectively. However, the sensor constructed with 10 %Pd_0.7Au_0.3/CNT_dendrimer modified electrode has a very high sensitivity of 316.89 μA mM^?1 cm^?2 with a quick response time of 2 s and a wide linear range of 0.001–19.0 mM. In addition, the interference experiment indicated that the 10 % Pd_0.7Au_0.3/CNT_dendrimer nanoparticles have good selectivity toward H₂O₂.     

Anticancer activities of manganese-based photoactivatable CO-releasing complexes (PhotoCORMs) with benzimidazole derivative ligands

Carbon monoxide is an important signaling molecule which is produced by heme oxygenase-1. CO shows antiproliferative activity against cancer cells; hence, activation of HO-1 is a significant inhibition strategy against tumor formation and survival of cancer cells. In this work, manganese-based CO-releasing molecules (CORMs) were designed and synthesized to inhibit breast cancer cell proliferation. Human invasive ductal breast cancer cells (MCF-7) were treated with the synthesized CORMs to investigate the effect of the complexes on breast cancer survival under UV light. In vitro experiments indicated that the complexes inhibited breast cancer cell proliferation, and further, the antiproliferative effects were increased under UV light. Thus, these novel CORMs may provide a drug template for the treatment of invasive ductal breast cancer.     

Gain and transient photoresponse of quantum well infrared photodetectors: a detailed ensemble Monte Carlo study

We investigate different gain characteristics observed on quantum well infrared photodetectors (QWIPs) fabricated with various material systems, and the effects of barrier material properties on the device characteristics through detailed ensemble Monte Carlo simulations. When the energy spacing between the central and satellite valleys is increased, the improvement in the excited electron lifetime is found to be much stronger than that in the average electron velocity in the device. According to our results, relatively high gain observed in InP/In_0.53Ga_0.47As QWIPs under large bias is not due to the higher mobility in InP as suggested earlier; it can mainly be attributed to higher excited electron lifetime as a result of relatively large Γ–L energy spacing. We discuss the details of the fast part of the Al_0.3Ga_0.7As/GaAs QWIP transient photoresponse, which exhibits three regions with different decay characteristics under a short pulse of radiation. The duration of the final region, during which the electrons excited near the emitter are extracted from the collector, is observed to be considerably long due to the dispersion of the photoelectrons. The photoresponse time rapidly decreases with increasing bias under low bias, and nearly saturates at 10 ps under large bias being 40% larger than the average transit time estimated by dividing the device length to the average steady-state electron velocity in device. We also investigate the effects of the interface reflections on the photoresponse time.     

Tracking the shift to 'postgenomics'

Current knowledge about the variety and complexity of the processes that allow regulated gene expression in living organisms calls for a new understanding of genes. A 'postgenomic' understanding of genes as entities constituted during genome expression is outlined and illustrated with specific examples that formed part of a survey research instrument developed by two of the authors for an ongoing empirical study of conceptual change in contemporary biology.     

Stokes and anti-Stokes Raman scattering of 5H-dibenzo(a,d)cyclohepten-5-ol

The ultraviolet absorption and emissions as well as Stokes and anti-Stokes Raman scatterings of spectroscopically pure 5H-dibenzo(a,d)cycloheptene-5-ol were investigated by flash and laser-flash photolysis technique in solution at room temperature and at 77K. The whole spectrum, absorption, excitation, prompt and delayed fluorescence, T-T absorption spectra were recorded photographically and photoelectrically in the ultraviolet and visible region and phosphorescence spectrum, Stokes, anti-Stokes scatterings were recorded at 77K.     

Antimicrobial activity and pollen composition of honey samples collected from different provinces in Turkey

The antibacterial activity of honey samples from different sources were collected and investigated against Bacillus cereus, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, Klebsiella pneumoniae ATCC 27736, Morganella morganii, Micrococcus luteus NRRL B-4375, Escherichia coli ATCC 35218, and Candida albicans. Pathogens exhibited different sensitivities towards the honey samples. The results showed that majority of the honey samples (75%) generally inhibitied the bacteria tested. The honey samples which were obtained from Izmir (samples 1 and 2) proved more effective as inhibitors against P. aeruginosa, E. coli, and S. aureus. The honey which was obtained from Mu?la (sample 5) exhibited high anticandidal activity on C. albicans. A comparison of the honey samples on the basis of pollen content revealed that they were heterofloral, and samples which had highest antibacterial activity against P. aeruginosa, E. coli, and S. aureus were dominated by pollen from Chenopodiaceae/Amaranthaceae (sample 1), and Trifolium, Trigonella, Cyperaceae, Zea mays and Anthemis taxa (sample 2). The honey proved more effective on bacteria than antibiotics.     

Comparison of the Optoelectronic Performance of Neutral and Cationic Forms of Riboflavin

The riboflavin dye 2,3,4,5-tetra-O-acetyl-1-[3-(6-bromohexyl)-7,8-dimethyl-2,4-dioxo-3,4-dihydrobenzo[g]pteridin-10(2H)-yl]-1-deoxypentitol and its pyridinium salt were synthesized, and studied by absorption and fluorescence spectroscopy in solutions and on thin film states. The first absorption band of riboflavin-pyridinium salt derivative is red-shifted by 10 nm compared to neutral one on film. Cationic riboflavin derivative shows significant wavelength changes on its fluorescence emission spectrum in the excited state depending on the solvent polarity and the electronic environment. The fluorescence quantum yields of cationic riboflavin gave much higher values as compared to that of its neutral form. The fluorescence lifetimes were found to be in the range of 5.5–6.6 ns with mono ? exponential behavior. These dyes possess low-lying HOMO energy levels which are suitable to be able to inject holes to donor polymers so that they can be used as acceptor component in the active layer of bulk heterojunction solar cells (BHJ-SCs). Photovoltaic responses are reported for P3HT:riboflavin active layer wherein the synthesized dyes are used as acceptor component. Also, neutral riboflavin shows greater electron mobility value of 1.3 × 10^?3 cm²/V?s compared to its cationic derivative.     

Interfacial engineering of CuO nanorod/ZnO nanowire hybrid nanostructure photoanode in dye-sensitized solar cell

Developing efficient and cost-effective photoanode plays a vital role determining the photocurrent and photovoltage in dye-sensitized solar cells (DSSCs). Here, we demonstrate DSSCs that achieve relatively high power conversion efficiencies (PCEs) by using one-dimensional (1D) zinc oxide (ZnO) nanowires and copper (II) oxide (CuO) nanorods hybrid nanostructures. CuO nanorod-based thin films were prepared by hydrothermal method and used as a blocking layer on top of the ZnO nanowires’ layer. The use of 1D ZnO nanowire/CuO nanorod hybrid nanostructures led to an exceptionally high photovoltaic performance of DSSCs with a remarkably high open-circuit voltage (0.764 V), short current density (14.76 mA/cm² under AM1.5G conditions), and relatively high solar to power conversion efficiency (6.18%) . The enhancement of the solar to power conversion efficiency can be explained in terms of the lag effect of the interfacial recombination dynamics of CuO nanorod-blocking layer on ZnO nanowires. This work shows more economically feasible method to bring down the cost of the nano-hybrid cells and promises for the growth of other important materials to further enhance the solar to power conversion efficiency.