Rotenoid and isoflavone metabolites from an antioxidant seed extract of Dalbergia lanceolaria subsp. paniculata (roxb.) thoth

Abstract

A new rotenoid named 12-O-methylrotenolol along with five known rotenoid and isoflavone metabolites were isolated from the seeds of Dalbergia lanceolaria subsp. paniculata, collected from Egypt. The structures of these compounds were identified by physical and spectroscopic data measurements ([α]_D, UV, 1D- and 2D-NMR and MS). The methanol extract of the seeds exhibited strong antioxidant activity with IC₅₀ value 0.7?µg/µl against DPPH radical, in respect to quercetin as antioxidant reference (IC₅₀ 1.5?μM), while the tested compounds from this extract showed weak activities with IC₅₀ values ranged from 19.6 to 33.0?µM.     

Geranyl Acetate Emulsions: Surfactant Association Structures and Stability

The phase diagram of fragrance oil, geranyl acetate, water, and a surfactant, Laureth 4, was used to calculate the surfactant association structures present in emulsions with constant O/W ratio for increased fractions of surfactant. The liquid crystal appeared in the emulsion at a critical value of the surfactant fraction and additional surfactant caused an approximately linear increase of it, while the fraction of the aqueous phase experienced a corresponding reduction. The result of the calculations was confirmed by optical microscopy observation with the samples between crossed polarizers. The calculations revealed the formation of vesicles from the liquid crystal to result in a drastic reduction of the “free” aqueous phase, due to the amount of the aqueous liquid forming the core of the vesicle.     

Some experiments on complex spontaneous emulsification in the system water–benzene–ethanol

The system water–benzene–ethanol was used to illustrate the complexity of spontaneous emulsification, when water-poor emulsions are brought in contact with water. In the first case, an O/W emulsion located close to the plait point in the system was used. The aqueous phase in the emulsion was incompatible with water, and a strong spontaneous emulsification to an O/W between the two liquids took place in the water layer close to the interface between layers. In the second case, a W/O emulsion, also close to the plait point, was brought in contact with water. Now, the spontaneous emulsification between the water and the oil phase of the original emulsion to an O/W emulsion also took place in the water layer forming a distinct emulsion layer beneath the interface.     

2-Pyridyl-benzimidazole-Pd(II)/Pd(0) Supported on Magnetic Mesoporous Silica: Aerobic Oxidation of Benzyl Alcohols/Benzaldehydes and Reduction of Nitroarenes

Catalysis Surveys from Asia - 2-(2-Pyridyl)benzimidazole (PyBzIm) was supported onto magnetic mesoporous silica, Fe3O4@SiO2@SBA-15 via the click chemistry. The supported ligand was treated with...     

Type S Non-Ribosomal Peptide Synthetases for the Rapid Generation of Tailormade Peptide Libraries**

Bacterial natural products in general, and non-ribosomally synthesized peptides in particular, are structurally diverse and provide us with a broad range of pharmaceutically relevant bioactivities. Yet, traditional natural product research suffers from rediscovering the same scaffolds and has been stigmatized as inefficient, time-, labour- and cost-intensive. Combinatorial chemistry, on the other hand, can produce new molecules in greater numbers, cheaper and in less time than traditional natural product discovery, but also fails to meet current medical needs due to the limited biologically relevant chemical space that can be addressed. Consequently, methods for the high throughput generation of new natural products would offer a new approach to identifying novel bioactive chemical entities for the hit to lead phase of drug discovery programs. As a follow-up to our previously published proof-of-principle study on generating bipartite type S non-ribosomal peptide synthetases (NRPSs), we now envisaged the de novo generation of non-ribosomal peptides (NRPs) on an unreached scale. Using synthetic zippers, we split NRPSs in up to three subunits and rapidly generated different bi- and tripartite NRPS libraries to produce 49 peptides, peptide derivatives, and de novo peptides at good titres up to 145 mg L⁻¹. A further advantage of type S NRPSs not only is the possibility to easily expand the created libraries by re-using previously created type S NRPS, but that functions of individual domains as well as domain-domain interactions can be studied and assigned rapidly.     

Preparation of Cationic Mixed-Mode Acrylamide-Based Monolithic Stationary Phases for Capillary Electrochromatography

A series of amphiphilic macroporous mixed-mode acrylamide-based continuous beds bearing positively charged quaternary ammonium groups is synthesized for capillary electrochromatography (CEC) under variation of the concentration of the cationic monomer in the polymerization mixture. Positively charged mixed-mode monolithic stationary phases are synthesized in pre-treated fused silica capillaries of 100 µm I.D via single step free radical copolymerization of cyclodextrin-solubilized N-tert-butylacrylamide, a hydrophilic crosslinker (piperazine diacrylamide), a hydrophilic neutral monomer (methacrylamide), and a positively charged monomer ([2-(methacryloyloxy)ethyl]trimethyl ammonium methyl sulfate) in aqueous solution containing the lyotropic salt ammonium sulfate as a pore-forming agent. The synthesized monolithic stationary phases contain hydrophobic, hydrophilic, and charged functionalities. They can be employed for the CEC separations of different classes of neutral and charged solutes (with varied polarity) in the reversed-phase mode, in the normal-phase mode, in the ion-exchange mode, in a mixed-mode, or in the hydrophilic interaction liquid chromatography (HILIC) mode. The influence of the concentration of the cationic monomer in the polymerization mixture on retention factor, electroosmotic mobility, and methylene selectivity (α_meth) is studied under isocratic conditions for alkylphenones in the reversed-phase mode by capillary electrochromatography (CEC). Scanning electron microscopy (SEM) micrographs demonstrate that the morphology of the synthesized monoliths (i.e., the domain size) is strongly influenced by the variation of the concentration of the cationic monomer in the polymerization mixture.     

High performance liquid chromatography separation of structurally related enkephalins on quaternary ammonium-embedded stationary phase in isocratic mode

Separation of twelve enkephalins was investigated on a quaternary ammonium-embedded stationary phase (Stability BS-C23). Variation of buffer pH of the mobile phase highlighted the complex relationship between repulsive/attractive electrostatic interactions and the reversed-phase partitioning mechanism. The effect of three different anions employed as additives (phosphate, chloride and perchlorate) was examined at various concentrations and two pH values (acidic and neutral). At pH 2.5, an increase in the anion eluent concentration resulted in a higher retention factors of positively charged enkephalins. This effect was more pronounced when perchlorate ions were added to the mobile phase rather than phosphate and chloride ions, due to chaotropic and ion-pairing effects. In contrast, at pH 7.5, retention factors of negatively charged enkephalins decreased when these salts were added, due to an anion-exchange mechanism. Perchlorate caused a sharper decrease than chloride and phosphate anions did. The results presented here provide insight into the possible adjustment of retention and separation of peptides on a mixed-mode stationary phase (BS-C23) by a careful control of the buffer pH, the nature and concentration of anions, added to the buffer, and organic modifier content.     

Retention mechanism of peptides on a stationary phase embedded with a quaternary ammonium group: A liquid chromatography study

We investigated the mechanisms involved in the retention of various peptides on a stationary phase embedded with a quaternary ammonium group (BS C23), by high-performance liquid chromatography. This was compared with peptide retention on a conventional reversed-phase C18 (RP C18) column under isocratic conditions, to understand better the various mechanisms involved. Chromatographic characterization of the two stationary phases with “model” compounds showed that BS C23 is less hydrophobic than RP C18 and induces electrostatic interaction (attraction or repulsion) with ionized compounds. If reversed-phase partitioning was the predominant retention phenomenon, for both stationary phases, the retention mechanisms in BS C23 provided different selectivity to that of RP C18. Electrostatic attraction or repulsion was clearly observed between peptides and the permanent positively charged group embedded in BS C23 depending on the pH. For most of the peptides, a weak anion-exchange mechanism was observed on the quaternary ammonium-embedded stationary phase if mobile phases at neutral pH and low ionic strengths were employed.     

Experimental investigation on the effect of natural gas premixed ratio on combustion and emissions in an IDI engine

Journal of Thermal Analysis and Calorimetry - Usage of natural gas in an internal combustion engine that has different combustion technologies is considered a possible solution to reduce engine...     

MnV2O6⋅V2O5 cross-like nanobelt arrays: synthesis, characterization and photocatalytic properties

Single-crystalline MnV₂O₆?V₂O₅ cross-like nanobelt arrays were successfully synthesized by hydrothermal reaction. The products were characterized by X-ray diffraction, transmission electron microscopy and high-resolution transmission electron microscopy. The effects of the reaction conditions such as pH, V⁵⁺/Mn²⁺ ratio, carboxymethyl cellulose concentration and reaction time on the morphology of the products were studied. The band gap of the as-prepared products was calculated via diffuse reflectance spectral analysis and their activity of photocatalytic oxidation was evaluated by photodegradation of methylene blue under visible-light irradiation. The results showed that the degradation efficiency of methylene blue catalyzed by the calcinated products is remarkably enhanced due to Mn doping, suggesting that MnV₂O₆?V₂O₅ cross-like nanobelt arrays are a good candidate for visible-light-driven photocatalysts.