Sol-gel entrapment of monoclonal anti-atrazine antibodies

We report the successful doping of a sol-gel matrix with an antibody, retaining its ability to bind free antigen from an aqueous solution. The particular system described is monoclonal anti-atrazine mouse antibody which was entrapped in SiO₂ sol-gel matrices, prepared from tetramethoxysilane by several methods. Atrazine was selected as a model compound for this study, within the framework of the development of immunochemical-based methods for monitoring pesticide residues and other organo-synthetic environmental contaminants. Nanogram quantities of atrazine were applied on SiO₂ sol-gel columns doped with this antibody, and the amount of eluted antigen was determined by Enzyme Linked ImmunoSorbent Assay (ELISA). Under appropriate sol-gel-forming conditions, high amounts of atrazine were bound to the sol-gels, ranging between 60% and 91% of the amount applied to the column. The combination of the properties of the sol-gel matrix (e.g., stability, inertness, high porosity, high surface area and optical clarity), together with the selectivity and sensitivity of the antibodies, enable extension of this feasibility study to development of a novel group of immunosensors which could be used for purification, concentration and monitoring of a variety of residues from different sources.Contribution from the Agricultural Research Organization (ARO), Bet Dagan, Israel. No., 1697-E, 1995 series.     

One-pot sequences of reactions with sol-gel entrapped opposing reagents: an enzyme and metal-complex catalysts

We extend our sol-gel methodology of one-pot sequences of reactions with opposing reagents to an enzyme/metal-complex pair. Sol-gel entrapped lipase and sol-gel entrapped RhCl[P(C(6)H(5))(3)](3) or Rh(2)Co(2)(CO)(12) were used for one-pot esterification and C-C double bond hydrogenation reactions, leading to saturated esters in good yields. When only the enzyme is entrapped, the homogeneous catalysts quench its activity and poison it. Thus, when 10-undecenoic acid and 1-pentanol were subjected in one pot to the entrapped lipase and to homogeneously dissolved RhCl[P(C(6)H(5))(3)](3) under hydrogen pressure, only 7% of the saturated 1-pentyl undecanoate was obtained. The yield jumped 6.5-fold when both the enzyme and the catalyst were immobilized separately in silica sol-gel matrixes. Similar one-pot esterifications and hydrogenations by sol-gel entrapped lipase and heterogenized rhodium complexes were carried out successfully with the saturated nonoic, undecanoic, and lauric acids together with several saturated and unsaturated alcohols. The use of (S)-(-)-2-methylbutanol afforded an optically pure ester. The heterogenized lipase is capable of inducing asymmetry during esterification with a prochiral alcohol. Both the entrapped lipase and the immobilized rhodium catalysts can be recovered simply by filtration and recycled in further runs without loss of catalytic activity.     

Modification of Non-Hydrolytic Sol-Gel Derived Alumina by Solvent Treatments

The effect of wetting non-hydrolytic derived alumina xerogels with water and organic solvents in the 20–70°C range on the alumina's properties was investigated. Wetting with organic solvents does not affect the alumina. However, contact with water was found to change the sharp crystallization at 800°C to a continuous crystallization starting at 450°C. Water treatment for a day at room temperature (RT) followed by second calcination decreased the surface area by 10%. This decrease in surface area is less pronounced with increasing wetting periods. On the other hand water treatment at 50–70°C followed by a second calcination resulted in a surface area increase of up to 15%. Upon water treatment the total pore volume has decreased from 0.65 (cm³/gr) to 0.48 (cm³/gr) and the average pore size decreased from 6.8 nm to 4.1 nm. The Cl content was found to be uneffected by the water treatment, remaining at 2.5% wt. Wetting with water at elevated temperature (70°C) accelerated the morphological changes, eliminating the crystallization peak at 800°C in one hour. A dissolution-reprecipitation mechanism is suggested to explain the results. In addition, Mass-Spectroscopy of the effluent gas during heat treatment revealed the emission of CO₂ and water upon phase transition into -Al₂O₃, at 1150–1300°C.     

Z/E PHOTOISOMERIZATION OF UROCANIC ACID*

The E ? Z photoisomerization of the title compound (UA) (a naturally occurring sunscreen) has been studied in aqueous solution. At a UA concentration of 6mM and using 313nm excitation, φ_E→z= 0.52, φ_Z→E= 0.47 and the photostationary state is 34% E. Under these conditions, loss of UA is minimal. Low energy triplet quenchers fail to impede the isomerization, but the reaction can be induced by several triplet sensitizers. The E_T for UA is estimated to be approximately 55 kcal/mol.     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

Enantioselective, chirally templated sol-gel thin films

Enantioselective surfactant-templated thin films were fabricated through the sol-gel (SG) process. The enantioselectivity is general in the sense that it discriminates between pairs of enantiomers not used for the imprinting process. The chiral cationic surfactant (-)-N-dodecyl-N-methylephedrinium bromide (1) was used as the surfactant template, and after its extraction chiral domains were created. The chiral discriminative feature of these films was examined by challenging with pure enantiomer solutions for rebinding. Selective adsorption was shown using (R)- and (S)-propranolol, (R)-2 and (S)-2, respectively, and (R)- and (S)-2,2,2-trifluoro-1-(9-anthryl)ethanol, (R)-3 and (S)-3, respectively, as the chiral probes. The selective adsorption was measured by fluorescence analysis, and the chiral selectivity factors were found to be 1.6 for 2 and 2.25 for 3. In both cases, (R)-enantiomer was adsorbed preferably. The resulting material was characterized by transmission electron microscopy, by diffraction, and by surface area measurements, and was found to be semicrystalline with short-range ordered domains (50 A) of hexagonal symmetry.     

Continuous chirality measures in transition metal chemistry

The definition of the continuous chirality measure(CCM) is provided and its applications are summarized in this tutorial review, with special emphasis on the field of transition metal complexes. The CCM approach, developed in recent years, provides a quantitative parameter that evaluates the degree of chirality of a given molecule. Many quantitative structural correlations with chirality have been identified for most of the important families of metal complexes. Our recent research has shown that one can associate the chirality measures with, e.g., enantioselectivity in asymmetric catalysis. We also explore a fragment approach to chirality in which we investigate which part of a molecule is responsible for the chirality-associated properties of a given family of compounds.     

Synthesis and photopinacol rearrangement of 1a,9a-dihydro-1a,9b-diphenylphenanthro[9,10-b]oxirene

The synthesis of the title compound is described. Pinacol reduction of 2,2′-dibenzoylbiphenyl followed by dehydration of the trans-diol, so formed, with dimethylformamide dimethyl acetal yielded 55% of the oxirane. Irradiation of the oxide in methylene chloride at 254 nm gave 10,10-diphenyl-9-(10H)phenanthrone as the major photoproduct.