外电场下光聚合反应动力学的表征方法

外电场下光聚合反应动力学的表征方法李从武，潘昂上海材料研究所，上海２０００８２）关键词光聚合反应、液晶、外电场、动力学、表征近年来，液晶单体在外场（电场、磁场和剪切力）下在位光聚合反应的研究工作受到了很大的关注［’，ＺＩ．众所周知，热致型侧链高分子液...     

Bisorthoesters as polymer intermediates. II. A facile method for the preparation of polybenzimidazoles

Aromatic bisorthoesters were found to be good polymer intermediates and could be condensed with aromatic tetramines under mild conditions, in DMSO at 100°C in a relatively short reaction time to give polybenzimidazoles. The hexapropyl orthoesters of terephthalic and isophthalic acid were the preferred aromatic orthoesters because they were relatively easily purified by vacuum distillation to polymer grade intermediates, since they are liquids. Higher orthoesters distill even under good vacuum near or above the decomposition temperature of the orthoester group. Hexaethyl orthooxalate was also used and is a very useful and stable derivative of oxalic acid, which can be used for condensation reactions. These three orthoesters were used for condensations with 3,3′,4,4′-tetraaminobiphenyl, 1,2,3,4-tetraaminobenzene, 3,3′,4,4′-tetraaminobiphenyl ether, and 3,3′,4,4′-tetraaminobenzophenone. All polybenzimidazoles were obtained in high to quantitative yields and with varying molecular weights (η_inh = 0.1?0.8 dl/g), which in some cases were in the fiber forming range.     

Synthesis of acryloyl-type polymer fixing 5-fluorouracil residues through D-glucofuranoses and its antitumor activity

Acryloyl-type polymer fixing 1-β-carbonylethyl-5-fluorouracil residues through D -glucofuranoses via ester bonds was synthesized by means of polymerization of the corresponding monomer and polymer reaction. In order to provide the water-soluble objective polymer, the copolymerization of the acryloyl-type monomer with acrylamide was carried out. The extent of release of 5-FU residues from the copolymer was investigated in the enzyme or nonenzyme system in vitro. Furthermore, the antitumor activities of the water-insoluble homopolymer and water-soluble copolymer obtained were tested in vivo.     

Measurement of γp→K + Λ and γp→K + Σ 0 at photon energies up to 1.47 GeV

The reactions pK ⁺ and pK ^{+ 0} have been measured with the multiparticle detector system SAPHIR at ELSA in Bonn. Besides the differential cross sections the polarization and, for the first time, the ⁰ polarization have been determined in a photon induced reaction. All data are presented as functions of the photon energy (from threshold up to 1.47 GeV) and of the kaon production angle (0°–180°). The polarization of both and ⁰ is substantial at all energies and varies strongly with the production angle.This work is supported by the Bundesminister für Forschung und Technologie (BMFT), FK 06 BN 621 I     

Preparation et caracterisation des polymeres tete-a-tete—VI. Proprietes physicochimiques du polystyrene tete-a-tete en solution diluee. Comparaison avec des polystyrenes de structure differente

The dilute solution properties of head-to-head polystyrene are reported. Determination of the “θ” temperature in cyclohexane has been made and compared with the “θ” temperature of the head-to-tail polystyrene (polyprotostyrene and poly-deuteriostyrene). The viscometric behaviour in a good solvent has been also examined and compared with the properties of head-to-tail polystyrenes (atactic, isotactic and deuterated).     

Determination of heavy metal complexes with humic substances by HPLC/ICP-MS coupling using on-line isotope dilution technique

An isotope dilution mass spectrometric (IDMS) method has been developed for the simultaneous determination of the complexes of 11 heavy metals (Ag, Cd, Cu, Mo, Ni, Pb, Tl, U, W, Zn and Zr) with humic substances (HS) by coupling HPLC with ICP-MS and applying the on-line isotope dilution technique. The HPLC separation was carried out with size exclusion chromatography. This HPLC/ICP-IDMS method was applied to samples from a brown water, ground water, sewage and seepage water as well as for a sample containing isolated fulvic acids. The total contents of heavy metals and of their complexes were analyzed in these samples with detection limits in the range of 5–110 ng/L. The analysis of heavy metal/HS complexes from the different waters resulted in characteristic fingerprints of the distribution pattern of heavy metals in the separated HS fractions. A comparison between the total heavy metal concentrations and their portions bound to humic substances showed distinct differences for the various metals. Simultaneous ¹²C detection was used for the characterization of HS complexes not identified by UV detection and for the determination of relative DOC concentrations of chromatographic peaks. Received: 21 February 1997 / Revised: 27 May 1997 / Accepted: 28 May 1997     

Solid-state,optical-rotation measurements on macromolecules using powder-suspensions

Summary We report techniques for measuring optical rotation of suspended solids, including dissymmetric molecular crystals (e.g. sodium chlorate and bromate), synthetic polymers, polypeptides and biopolymers. Examples include poly(triphenylmethyl methacrylate), poly-S-lactide, poly-L-hydroxyproline, hemocyanine, cellulose acetate andRNA. The results indicate that optical rotation measurements are sensitive to differences in secondary structure and can serve as a probe for structural differences between solid-state and solution.

---

Messung der optischen Rotation von Makromolekülen im Festzustand unter Verwendung von Pulversuspensionen

Zusammenfassung Es wird über eine Methode zur Messung der optischen Rotation von Festkörpern in Suspensionen berichtet, wobei dissymetrische Kristalle (z. B. Natriumchlorat und -bromat), synthetische Polymere, Polypeptide und Biopolymere behandelt werden. Die Beispiele umfassen Poly(triphenylmethylmethacrylat), Poly-S-lactid, Poly-L-hydroxyprolin, Hemocyanin, Celluloseacetat undRNA. Die Ergebnisse zeigen, daß die optischen Rotationen bezüglich Unterschiede in der Sekundärstruktur empfindlich sind und daß diese Messungen als ein Maß für Strukturunterschiede zwischen Festzustand und Lösung herangezogen werden können.

     

Haloaldehyde polymers. IX. Polybromodichloroacetaldehyde

Bromodichloroacetaldehyde was synthesized by two methods. The first synthesis started from chloral, which was allowed to react with Ph₃P and the resultant compound brominated and hydrolyzed to give bromodichloroacetaldehyde in an overall yield of 60%. Purification by repeated distillation from P₂O₅ gave polymerization grade bromodichloroacetabldehyde. Bromodichloroacetaldehyde could also be synthesized by bromination of dichloroacetaldehyde diethyl acetal. The yields of this synthesis were only 20–30%, and the aldehyde could not be purified readily to give polymerization grade monomer. Bromodichloroacetaldehyde could be homopolymerized at ?30°C with anionic and also some cationic initiators to a polymer which was insoluble and did not melt but degraded to monomer above 200°C. The ceiling temperature of the polymerization was ?15°C in 1M solution. Bromodichloroacetaldehyde could also be copolymerized with isocyanates, primarily aryl isocyanates, and also with chloral.     

Functional polymers,XL. Syntheses of mono- and di(4-methoxy)benzotriazolesubstituted 2,4-dihydroxyaceto(or benzo)phenones

Eight benzotriazoles and (4-methoxy)benzotriazoles, mono- or di-substituted derivatives of 2,4-dihydroxyaceto(or benzo)phenone were synthesized by azo coupling of (4-methoxy)2-nitrobenzenediazonium chloride with 2,4-dihydroxyaceto(or benzo)phenone followed by reductive cyclization. Pure mono-substituted compounds were very difficult to prepare. Careful selection of thepH for the azo coupling and selection of the proper reagents for the reductive cyclization were essential. All compounds were characterized by their ultraviolet, infrared¹H and¹³C NMR spectra and their elemental analysis. These compounds have both the 2(2-hydroxyphenyl)2H-benzotriazole unit and a 2-hydroxyaceto(or benzo)phenone unit in the same molecule and are effective and useful ultraviolet absorbers.Dedicated to Prof. Dr.K. Komarek, Vienna, on the occasion of his 60^th birthday with best wishes.