Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt₄L₂(1a) and Pt₈L₂(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt₈L₂(3a) metallacage. PF₆⁻ analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b–3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

Synthesis of Pt(ii) based metallacages as aggregation induced emissive supramolecular architectures for fabricating artificial light harvesting systems for cross coupling cyclization under visible light is achieved.     

Lanthanon (III) Complexes of Bifunctional Tridentate and Tetradentate Schiff Bases

Reactions of isopropoxides of praseodymium, neodymium and samarium with bifunctional tridentate and tetradentate schiff bases (i.e. salicylidene-O-aminophenol and bis-salicylaldehyde ethylenediamine) have been carried out in benzene in different stoichiometric ratios resulting in the formation of products with the formula M(OPrⁱ)(C₁₁H₉NO₂), M(C₁₃H₉NO₂)(C₁₃H₁₀NO₂). M₂(C₁₃H₉NO₂) M(OPrⁱ)(C₁₅H₁₄N₂O₂), M(C₁₆H₁₄N₂O₂)(C₁₆H₁₅N₂O₂) and M₂(C₁₆H₁₄N₂O₂)₃ (where M stands for Pr, Nd and Sm). The products were found to be yellow to orange solids soluble in benzene and alcohol. The absorption spectra of these complexes were also recorded in methanol.     

Thermal analysis of polysiloxanes, aromatic polyimide and their blends

Low molecular weight poly(dimethylsiloxane) and poly(methylphenylsiloxane) were synthesized and blended with polyimide (PI) at its precursor poly(amic acid) stage. FTIR analysis has proven the retention of polysiloxanes in polyimide after the ultimate curing of blends. Differential scanning calorimetric analysis was performed on polysiloxanes to elucidate the structures present in polymers while thermogravimetric analysis (TGA) was performed on polysiloxanes, polyimide as well as their blends to evaluate the thermal stability and to analyze the effect of polysiloxane incorporation in blends. Blends have shown synergistic improvement as compared to neat polyimide.     

Synthesis of polyhydroquinoline derivatives through unsymmetric Hantzsch reaction using organocatalysts

A novel and green approach for efficient and rapid synthesis of polyhydroquinoline derivatives via unsymmetric Hantzsch reaction using organocatalysts at room temperature was reported. The process is a simple, environmentally friendly, rapid, and high yielding reaction for the synthesis of polyhydroquinoline derivatives. The catalytic efficiency of various small organocatalysts such as l-proline, trans-4-hydroxy-l-proline, l-thiaproline, dl-phenylglycine, and (−)-cinchonidine was studied under aqueous, organic, and solvent free conditions.     

Evidence for possible positive hole transport in the biological protein bovine serum albumin

Using the pulse radiolysis technique, the oxidation of the biological protein bovine serum albumin (BSA) by the species N ₃ ^. , CCl₃O ₂ ^. , OH and Br ₂ ^.– has been studied in aqueous solution. The repair of the N ₃ ^. oxidation by ascorbic acid and the effect of denaturing the protein on this repair has also been studied. The oxidation of Br ₂ ^.– seems to follow a different course from that of the other oxidizing agents suggesting the possibility of positive hole mobility in this protein. The repair by ascorbic acid is found more effective in the case of denatured protein. The rate constants for the reaction of Br ₂ ^– and N ₃ ^. are lower, in general, in the case of the denatured protein as compared with the undenatured BSA both at pH 6.9 and pH 10.7, suggesting that the convoluted structure of the protein plays a part in the process.     

Reactions of titanium(IV) isopropoxide with aliphatic and aromatic hydroxy esters,part I. 5-, 6-, 7- and 8-coordinate titanium(IV) complexes

Summary Reactions of titanium(IV) isopropoxide with ethyl 1-hydroxycyclohexylacetate, ethyl 2-hydroxy-2-arylpropionate, ethyl 2-hydroxy-2-arylbutyrate and ethyl 2-hydroxy-2-arylhydrocinnamate have been studied in dry benzene in different molar ratios under strictly anhydrous conditions. The Ti(OPr-i)₄-_nL_n type compounds, where L = hydroxy ester and n = 1 to 4, have been isolated and characterised by elemental analysis, molecular weight, i.r. and n.m.r. spectral studies. These products may be distilled unchanged under reduced pressure.Reprints of this are not available.     

Some new organotin(IV), aluminium(III)-μ-oxoisopropoxides and their benzoylacetone derivatives

The first organotin(IV), aluminium(III)-μ-oxoisoprovides of the type [R₃SnOA](OⁱPr)₂] (R = Me or Ph) have been made by heating of trimethyl- or triphenyl-tin acetate with aluminium isopropoxide. The reactions of these μ-oxoisopropoxides with benzoylacetone in 1:1 and 1:2 molar ratios yielded the compounds of the type [R₃SnOAl(OⁱPr)(bzac)] and [R₃SnOAl(bzac)₂] (where R = Me or Ph and BZAC = deprotonated benzoylacetone), respectively.