Resonance-enhanced multiphoton ionisation photoelectron spectroscopy of the ClO radical: the C 2 sigma- state

A (2 + 1) one-colour resonance-enhanced multiphoton ionisation study is carried out on the C 2 sigma- state of the ClO radical in the one-photon energy range 29,500-31,250 cm-1. The ClO radical is produced by one-photon photolysis of ClO2 employing 359.2 nm photons derived from a separate laser. In this way a significant concentration of vibrationally excited ClO in its spin-orbit split X 2 pi omega (omega = 3/2 or 1/2) electronic ground state is produced. In addition to mass-resolved excitation spectra, kinetic-energy resolved photoelectron spectra for the X 3 sigma-(v+)<--C 2 sigma-(v' = 3-5) transitions are measured. These transitions are not completely Frank-Condon diagonal, and indicate a decrease in bond length on removal of the Rydberg electron from the C 2 sigma- state. In addition to an unambiguous assignment of the C 2 sigma- state, valuable information is obtained on the degree of vibrational excitation with which the nascent ClO radical is formed in the photolysis of ClO2. Analysis of the photoelectron spectra is supported by Franck-Condon calculations based on potential energy curves either from experimental spectroscopic parameters, or obtained by theoretical ab initio methods.     

Photoelastic determination of stresses in multiple-pin connectors

The design, fabrication, and testing of photoelastic models of double-lap, multiple-pin connectors are discussed. Interest is in the stresses in the inner laps. These stresses are determined by constructing models with photoelastic inner laps and transparent-acrylic outer laps. The connectors have two pins, in tandem, parallel to the load direction. A photoelastic-isotropic point is shown to permit the evaluation of load sharing between the two pins. A numerical scheme, utilizing the isochromatic- and isoclinic-photoelastic data and a finite-difference representation of the planestress equilibrium equations, is used to compute the stresses around the two pins. Representative stress distributions and stress-concentration factors are shown.     

Phage display-derived inhibitor of the essential cell wall biosynthesis enzyme MurF

Background  

To develop antibacterial agents having novel modes of action against bacterial cell wall biosynthesis, we targeted the essential MurF enzyme of the antibiotic resistant pathogen Pseudomonas aeruginosa. MurF catalyzes the formation of a peptide bond between D-Alanyl-D-Alanine (D-Ala-D-Ala) and the cell wall precursor uridine 5'-diphosphoryl N-acetylmuramoyl-L-alanyl-D-glutamyl-meso-diaminopimelic acid (UDP-MurNAc-Ala-Glu-meso-A2pm) with the concomitant hydrolysis of ATP to ADP and inorganic phosphate, yielding UDP-N-acetylmuramyl-pentapeptide. As MurF acts on a dipeptide, we exploited a phage display approach to identify peptide ligands having high binding affinities for the enzyme.     

Fracture of thick laminated composites

The fracture of thick laminated graphite/epoxy composites has been the subject of an extensive research program. The program was divided into three major areas of investigation which included laminate thickness, laminate stacking sequence, and part-through surface flaws. The results from this program are reviewed with emphasis placed on their applicability to the design of thick laminated composite structures. Paper was presented at 1985 SEM Spring Conference on Experimental Mechanics held in Las Vegas on June 9–14, 1985.     

Telomerase activity measurement in magnetically captured epithelial cells: comparison of slab-gel and capillary electrophoresis

We have compared telomerase activity measurements by slab-gel and capillary electrophoresis in cultured cells (A549 and H125 human cancer cell lines) and in cells isolated from clinical peripheral blood specimens epithelial cells of patients with lung and esophageal cancer. Telomerase activity was determined using the telomerase repeat amplification protocol (TRAP) assay with phosphoimager scanning of slab-gels and by laser-induced fluorescence capillary electrophoresis (LIF-CE). Experiments using A549 and H125 cells were performed to determine the reproducibility of each method and to identify the contribution of each stage of the TRAP/polymerase chain reaction (PCR) assay to the variability. In these experiments, it was found that more than half of the overall variability (coefficient of variation, CV = 35%) of the slab-gel method and almost all of the overall variability (CV = 20%) of the CE method was due to the PCR stage of the TRAP assay. In the clinical samples, classification as positive or negative was by visual inspection of the slab-gel and CE electropherograms for the presence of the characteristic 6 base-pair TRAP ladder and by GeneScan analysis of the CE. We examined several criteria including the use of 3, 4, or 5 TRAP bands as the definition of a positive test. Using the slab-gel method, the 5-band criterion gave 40% sensitivity with 100% specificity (no false positives in inactive controls). The CE method yielded a comparable 38% sensitivity and 100% specificity using this criterion. These data indicate that detection of telomerase activity in epithelial cells isolated from peripheral blood has a useful level of sensitivity and specificity and may be useful in the detection and monitoring of aerodigestive cancers. However, analysis by slab-gel is cumbersome and the precision is poor (inter-replicate CV = 20%) compared to LIF-CE (CV = 5%). A high-throughput CE-LIF detection platform will be indispensable for validation studies of telomerase activity measurements.     

Localization of carboxyl groups at surface layer of carboxylated polymer emulsion particles by alkali treatment

For the purpose of localizing carboxyl groups from inside to particle surface, styrene — butyl acrylate — methacrylic acid (74.3/17.0/8.7, mol ratio) terpolymer emulsion was kept under pH 9 at different temperatures. The amount of carboxyl groups at the particle surface, As, was remarkably increased by the alkali-treatment above 35 °C. On the other hand, As value of the alkalitreated emulsion was decreased by keeping under ph 3 above 45 °C, although in the case of the original emulsion without the alkalitreatment, it was not changed by the acid-treatment. These results suggest that a part of polymer segments which have ionized carboxyl groups is dragged out at the surface by an increase in the affinity of the groups against water, and the dragged segments turn back into the inside again when the carboxyl groups are deionized.Part 97 of the series Studies on Suspension and Emulsion.     

High-throughput analysis of telomerase by capillary electrophoresis

The enzyme telomerase is expressed in (85-90)% of all human cancers, but not in normal, non-stem cell somatic tissues. Clinical assays for telomerase in easily obtained body fluids would have great utility as noninvasive, cost-effective methods for the early detection of cancer. The most commonly used method for the detection and quantification of telomerase enzyme activity is the polymerase chain reaction (PCR)-based assay known as the telomerase repeat amplification protocol or TRAP assay. Most of the TRAP assay systems use a slab-gel based electrophoresis system to size and quantify the PCR-amplified extension products. We are developing high-throughput capillary electrophoresis (CE) methods for the analysis of TRAP/PCR products. The TRAP assay was conducted on lysates of the human lung cancer cell line A-549 in reactions containing 5-100 cells. TRAP/PCR products were generated using a fluorescent 4,7,2'4'5'7',-hexachloro-6-carboxyfluorescein(HEX)-labeled TS primer and analyzed on the Applied Biosystems Model 310 CE system using POP4 polymer. After analysis with GeneScan and Genotyper software, the total peak areas of the TRAP ladder extension products were computed using Microsoft Excel. Results were compared with unlabeled TRAP/PCR products analyzed on the Bio-Rad BioFocus 3000 CE system using 6% high molecular weight polyvinylpyrrolidone (HMW PVP) polymer and SYBR Green I dye. Both CE systems were able to resolve the TRAP ladder products with high reproducibility and sensitivity (5-15 cells). With the appropriate robotic sample handling system, these CE methods would enable performing the telomerase TRAP assay with increased sensitivity, reproducibility and automation over slab-gel methods.     

Skeletons and Central Sets

Let be an open proper subset of Rⁿ. Its skeleton is the setof points with more than one nearest neighbour in the complementof its central set is the set of centres in maximal open ballsincluded in . Intuitively, if we think of as a land mass inwhich height is proportional to distance from the sea, its skeletonand central set can be thought of as corresponding to ridgesin the mountains of . In this note I discuss the metric andtopological properties of such sets. I show that any skeletonin Rⁿ is F, and has dimension at most n – 1, by any ofthe usual measures of dimension; that if is bounded and connected,its skeleton and central set are connected; and that separatesRⁿ iff its skeleton does iff its central set does. Any centralset in Rⁿ is a G set of topological dimension at most n –1. In the plane, I show that both skeletons and central setsare locally path-connected, and indeed include many paths offinite length. For any , its central set includes its skeleton;I give examples to show that the central set can be significantlylarger than the skeleton. 1991 Mathematics Subject Classification:54F99.