ROMBERG方法的改进

本文研究了全部根构成一个等比数列的多项式的性质，并将所得的结果用到数值积分的Ｒｏｍｂｅｒｇ方法＾「１」，得到了相应遥改进。     

Preparation and Properties of Aramid-Silica Hybrids with Inter-Phase Bonding Through (3-glycidoxypropyl)-trimethoxysilane

Nano-composites from aramid-silica system have been prepared via sol-gel process. Poly (phenyleneterephthalamide) copolymer chains were prepared by reacting a mixture of p- and m-phenylenediamines with terephthaloyl chloride in dimethylacetamide used as solvent. The sol-gel process in the polymer matrix was carried out through hydrolysis and condensation of a mixture of tetraethoxysilane and (3-glycidoxypropyl) trimethoxysilane. The latter was used to develop linkage, on one hand with silica network structure using alkoxy groups and on the other hand with aramid chains at its secondary amine groups through glycidal groups of silane. Mutual interaction between the two disparate phases aramid and silica network was thus created. Thin films of the composites containing different proportions of silica ranging from 5.0 to 25.0-wt% were cast by the solvent elution technique. The α-relaxation temperature associated with the glass transition was measured by the dynamic mechanical thermal analysis. The results showed an increase in the glass transition temperature from 328°C for the pure aramid to 352°C for the hybrid materials containing 25-wt% silica, an indicative of the increased interfacial interaction between the two phases. Films having relatively low silica content were flexible and transparent, but those with high silica content were opaque and brittle. These films were tested for their tensile strength, modulus and toughness. The mechanical strength of the composites as compared to the pure aramid increased initially but with further addition of silica the strength decreased. The initial increase can be explained due to increased interfacial interaction between the two phases, however agglomeration of silica particles was responsible for decreasing strength at higher silica contents.     

Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings

For the first time, the MOCVD technique has been used to deposit carbonated hydroxyapatite onto Ti6AL4V substrates using volatile monomeric (liquid) complexes [Ca(beta-diketonate)(2)(L)] and P(OEt)(3).     

Which Extraction Solvents and Methods Are More Effective in Terms of Chemical Composition and Biological Activity of Alcea fasciculiflora from Turkey?

The bioactive content, antioxidant properties, and enzyme inhibition properties of extracts of Alcea fasciculiflora from Turkey prepared with different solvents (water, methanol, ethyl acetate) and extraction methods (maceration, soxhlet, homogenizer assisted extraction, and ultrasound assisted extraction) were examined in this study. UHPLC-HRMS analysis detected or annotated a total of 50 compounds in A. fasciculiflora extracts, including 18 hydroxybenzoic and hydroxycinnamic acids, 7 Hexaric acids, 7 Coumarins, 15 Flavonoids, and 3 hydroxycinnamic acid amides. The extracts had phenolic and flavonoid levels ranging from 14.25 to 24.87 mg GAE/g and 1.68 to 25.26 mg RE/g, respectively, in the analysis. Both DPPH and ABTS tests revealed radical scavenging capabilities (between 2.63 and 35.33 mg TE/g and between 13.46 and 76.27 mg TE/g, respectively). The extracts had reducing properties (CUPRAC: 40.38–78 TE/g and FRAP: 17.51–42.58 TE/g). The extracts showed metal chelating activity (18.28–46.71 mg EDTAE/g) as well as total antioxidant capacity (phosphomolybdenum test) (0.90–2.12 mmol TE/g). DPPH, ABTS, FRAP, and metal chelating tests indicated the water extracts to be the best antioxidants, while the ethyl acetate extracts had the highest overall antioxidant capacity regardless of the extraction technique. Furthermore, anti-acetylcholinesterase activity was identified in all extracts (0.17–2.80 mg GALAE/g). The water extracts and the ultrasound-assisted ethyl acetate extract were inert against butyrylcholinesterase, but the other extracts showed anti-butyrylcholinesterase activity (1.17–5.80 mg GALAE/g). Tyrosine inhibitory action was identified in all extracts (1.79–58.93 mg KAE/g), with the most effective methanolic extracts. Only the ethyl acetate and methanolic extracts produced by maceration and homogenizer aided extraction showed glucosidase inhibition (0.11–1.11 mmol ACAE/g). These findings showed the overall bioactivity of the different extracts of A. fasciculiflora and provided an overview of the combination of solvent type and extraction method that could yield bioactive profile and pharmacological properties of interest and hence, could be a useful reference for future studies on this species.     

New chiral ruthenium(II)–phosphinite complexes containing a ferrocenyl group in enantioselective transfer hydrogenations of aromatic ketones

A new and versatile class of unsymmetrical ferrocenyl-phosphinite ligands possessing a stereogenic center has been prepared from commercially available, inexpensive aminoacids such as, d-, l-phenylglycine and d-, l-phenylalanine, through a concise synthetic procedure. These ligands are not very sensitive to air and moisture, and display good enantioselectivities in the ruthenium-catalyzed asymmetric transfer hydrogenation of acetophenone derivatives, in which up to 91% ee was obtained. A comparison of the catalytic properties of amino alcohols and other analogues based on a ferrocenyl backbone is also discussed briefly. The structures of these ligands and their corresponding complexes have been elucidated by a combination of multinuclear NMR spectroscopy, IR spectroscopy, and elemental analysis.     

A Common Conformation of Stabilized Triphenyl Phosphonium Ylidic Diesters with Bulky Alkoxy Groups

The phosphonium ylidic diesters, methyl and ethyl isopropyl and, methyl and ethyl t-butyl triphenylphosphoranylidene malonates, 1a,b and 2a,b , respectively, have the syn-anti conformation in solution, as in the crystal, and the bulkier alkoxy group is oriented towards phosphorus. The ¹ H NMR spectra show that in 1a,b , the isopropyl group is oriented towards the face of a phenyl group, consistent with π shielding in the ¹ H signals, and examination of the ¹ H coupled ¹³ C NMR spectra allows assignment of the acyl carbon signals. Computed bond lengths and angles for isolated molecules are similar to those in the crystal, and the geometry and the NMR spectra indicate extensive ylidic resonance. Estimated partial atomic charges on the ester oxygens are more negative when they are oriented towards, rather than away from, phosphorus.     

Sonochemical synthesis and electrochemical characterization of α-nickel hydroxide: precursor effects

Sonochemical degradation of urea was employed to synthesize alpha-nickel hydroxide from different nickel salts. Utilization of ultrasound yielded products with properties significantly different than the products obtained by thermal degradation of urea. The effect of intercalating chloride, nitrate, acetate, and sulfate anions on morphology and electrochemical performance was studied. The sulfate-intercalated sample had the smallest interlayer spacing when obtained by the sonochemical method, contradicting all the previous thermal synthesis results. The specific capacitance trend also differed from the literature values, and the value for the sulfate-intercalated sample was larger than that of acetate- and nitrate-intercalated samples. Ultrasonic synthesis increased the specific capacitance of the sulfate-intercalated sample significantly. This sample was also the most reversible and had the highest charge efficiency.     

Steric and Electronic Influence on the Coordination Aptitude of 4‐Formylpiperazine‐1‐Carbodithioate Towards Triorganotin(IV) Moieties

A fascinating ligand, 4‐formylpiperazinium 4‐formylpiperazine‐1‐carbodithioate (L‐salt) has been reacted with two electronically and sterically different trimethyltin(IV) chloride and triphenyltin(IV) chloride. The complexes 1 and 2 were characterized by elemental analysis, spectroscopic techniques, and X‐ray single crystal analysis. The latter technique confirmed the polymeric and monomeric nature of 1 and 2 , respectively. Both 1 and 2 showed intriguing molecular packing properties in the solid state. However, the packing of 1 is more interesting and unique where one‐dimensional polymer chains self assemble in two‐over‐two saltire‐shaped fashion to provide an overall multilayered structure. The different behavior of L toward two different tin(IV) compounds can be attributed to different electronic and steric environments around metal center.