ROMBERG方法的改进

本文研究了全部根构成一个等比数列的多项式的性质，并将所得的结果用到数值积分的Ｒｏｍｂｅｒｇ方法＾「１」，得到了相应遥改进。     

Radiochemical separation of <Superscript>67</Superscript>Ga from Zn and Cu using the adsorbent resin Amberlite XAD-7

Summary A column chromatography was developed using a nonionic, polar adsorbent resin Amberlite XAD-7 for routine radiochemical separation of ⁶⁷Ga from Zn and Cu. 7M HCl was found to be the optimum concentration for adsorption of ⁶⁷Ga and elution of both Zn and Cu. Distilled water was used for elution of ⁶⁷Ga from the column. The optimum flow rate of the solutions on to the column was 5 ml/min. The concentrations of Zn and Cu in the final product (30 ml), measured by a polarography method, were 2.0 and 0.5 ppm, respectively. A solvent extraction method, using diisopropyl ether/7M HCl system was also tested to perform the same separation and a comparison between the two methods was made. The radiochemical chromatographic separation system is simple in design and easy to operate for separations in a hot cell.     

Experimental and numerical study of residual stresses caused by cold expansion of adjacent holes

Cold expansion is a useful process for imposing compressive residual stresses around the holes in riveted and bolted connections. These stresses increase the fatigue life of holed parts. Distribution and amount of exerted residual stress dependent on various parameters as material, distance of adjacent holes, hole diameter, cold expansion ratio and plate thickness. In this study, experimental and numerical results for two different aluminum alloys and various holes distances are investigated and compared. Effects of mentioned parameters on the residual stress are studied.     

Silica Sulfuric Acid: A Versatile and Reusable Catalyst for Synthesis of Coumarin-3-carboxylic Acids in a Solventless System

Synthesis of substituted coumarin-3-carboxylic acid via Knoevenagel condensation of meldrum's acid with ortho-hydroxyaryl aldehydes in solventless system is described.     

A Common Conformation of Stabilized Triphenyl Phosphonium Ylidic Diesters with Bulky Alkoxy Groups

The phosphonium ylidic diesters, methyl and ethyl isopropyl and, methyl and ethyl t-butyl triphenylphosphoranylidene malonates, 1a,b and 2a,b , respectively, have the syn-anti conformation in solution, as in the crystal, and the bulkier alkoxy group is oriented towards phosphorus. The ¹ H NMR spectra show that in 1a,b , the isopropyl group is oriented towards the face of a phenyl group, consistent with π shielding in the ¹ H signals, and examination of the ¹ H coupled ¹³ C NMR spectra allows assignment of the acyl carbon signals. Computed bond lengths and angles for isolated molecules are similar to those in the crystal, and the geometry and the NMR spectra indicate extensive ylidic resonance. Estimated partial atomic charges on the ester oxygens are more negative when they are oriented towards, rather than away from, phosphorus.     

Highly Selective One-Pot Coupling Reaction of Indole,Aromatic Aldehydes,and 4-hydroxycoumarin Using Copper Octoate as a Homogeneous Catalyst

A facile protocol for the one-pot, multicomponent reaction of indole, 4-hydroxycoumarin, and aromatic aldehydes was developed using copper octoate as an inexpensive, commercially available, and efficient catalyst. This highly selective reaction eliminates the formation of homodimeric by-products (bisindoles and biscoumarins) and selectively results in the formation of heterodimeric adducts containing both indole and coumarin heterocycles.     

Focal Point Evaluation of Energies for Tautomers and Isomers for 3-hydroxy-2-butenamide: Evaluation of Competing Internal Hydrogen Bonds of Types -OH…O=, -OH…N, -NH…O=, and CH…X (X=O and N)

The title compound is a small molecule with many structural variations; it can illustrate a variety of internal hydrogen bonds, among other noncovalent interactions. Here we examine structures displaying hydrogen bonding between carbonyl oxygen and hydroxyl H; between carbonyl oxygen and amino H; hydroxyl H and amino N; hydroxyl O and amino H. We also consider H-bonding in its tautomer 2-oxopropanamide. By extrapolation algorithms applied to Hartree-Fock and correlation energies as estimated in HF, MP2, and CCSD calculations using the cc-pVNZ correlation-consistent basis sets (N = 2, 3, and 4) we obtain reliable relative energies of the isomeric forms. Assuming that such energy differences may be attributed to the presence of the various types of hydrogen bonding, we attempt to infer relative strengths of types of H-bonding. The Atoms in Molecules theory of Bader and the Local Vibrational Modes analysis of Cremer and Kraka are applied to this task. Hydrogen bonds are ranked by relative strength as measured by local stretching force constants, with the stronger =O…HO- > NH…O= > -OH…N well separated from a cluster > NH…O= ≈ >NH…OH ≈ CH…O= of comparable and intermediate strength. Weaker but still significant interactions are of type CH…N which is stronger than CH…OH.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Determination of low level nitrite and nitrate in biological, food and environmental samples by gas chromatography-mass spectrometry and liquid chromatography with fluorescence detection

Gas chromatography-mass spectrometry (GC-MS) and liquid chromatography with fluorescence detection (LC-FL) methods have been proposed for the determination of low level nitrite and nitrate in biological, food and environmental samples. The methods include derivatization of aqueous nitrite with 2,3-diaminonaphthalene (DAN), enzymatic reduction of nitrate to nitrite, extraction with toluene and chromatographic analyses of highly fluorescent 2,3-naphthotriazole (NAT) derivative of nitrite by using GC-MS in selected-ion-monitoring (SIM) mode and LC-FL. Nitrite and nitrate ions in solid samples were extracted with 0.5 M aqueous NaOH by sonication. The recoveries of nitrite and nitrate ions based on GC-MS and LC-FL results were 98.40% and 98.10% and the precision of these methods, as indicated by the relative standard deviations (RSDs) were 1.00% for nitrite and 1.20% for nitrate, respectively. The limits of detection of the GC-MS in SIM mode and LC-FL methods based on S/N = 3 were 0.02 and 0.29 pg/ml for nitrite and 0.03 and 0.30 pg/ml for nitrate, respectively.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.