Evaluation of micro-bubble size and gas hold-up in two-phase gas-liquid columns via scattered light measurements

In this paper, potential use of an elliptically polarized light scattering (EPLS) method to monitor both bubble size and gas hold-up in a bubble-laden medium is explored. It is shown that with the use of the new EPLS system, normalized scattering matrix elements (M_ij's) measured at different side and back-scattering angles can be used to obtain the desired correlations between the bubble sizes and input flow parameters for a gas-liquid (GL) column, including gas flow rate and surfactant concentrations. The bubble size distributions were first evaluated experimentally using a digital image processing system for different gas flows and surfactant concentrations. These images showed that the bubbles were not necessarily spherical. We investigated the possibility of modeling the bubbles as effective spheres. The scattering matrix elements were calculated using the Lorenz-Mie theory and the results were compared against the experimentally determined values. It was observed that the change in the bubble size yields significant changes in M₁₁, M₃₃, M₄₄, and M₃₄ profiles. An optimum single measurement angle of θ=120^° was determined for a gas velocity range of 0.04-0.35 cm/s (). The choice of the optimum angle depends on frit pore size, column diameter, gas pressure, and surfactant concentration. These results suggest that a simplified version of the present EPLS system can effectively be used as a two-phase flow sensor to monitor bubble size and liquid hold-up in industrial systems.     

Enhanced Ratiometric pH Sensing Using SNAFL-2 on Silver Island Films: Metal-enhanced Fluorescence Sensing

We have explored the opportunities for enhanced ratiometric pH sensing using the well-known carboxy seminaphthofluorescein (SNAFL-2) and silver island films (SiFs). Our results show that the metallic surfaces can provide up to a 40-fold increase in probe fluorescence intensity as compared to nonmetallic surfaces with the same probe coverage. However, while the S/N is significantly better for pH sensing, the emission wavelength ratiometric values are similar to that obtained in solution, due to the fact that the emission of both the acidic and basic forms of the probe are enhanced to similar extents. To the best of our knowledge this is the first report of enhanced ratiometric fluorescence sensing on metallic surfaces.     

Exact and explicit solutions to the discrete nonlinear Schrödinger equation with a saturable nonlinearity

We analyze the discrete nonlinear Schrödinger equation with a saturable nonlinearity through the (G^′/G)-expansion method to present some improved results. Three types of analytic solutions with arbitrary parameters are constructed; hyperbolic, trigonometric, and rational which have not been explicitly computed before.     

Synthesis and characterization of poly(1-vinyl-1,2,4-triazole) (PVTri)-barium hexaferrite nanocomposite

We present a method for the fabrication of PVTri-BaFe₁₂O₁₉ nanocomposites by in-situ polymerization of PVTri in the presence of synthesized BaFe₁₂O₁₉ nanoparticles. Nanoparticles, polymer and nanocomposite were analyzed by XRD, FTIR, TGA, TEM, NMR, GPC and conductivity techniques for structural and physicochemical characteristics. Crystallographic analysis revealed the phase as hexaferrite and X-ray line profile fitting yielded a crystallite size of 17±5 nm. Conjugation of PVTri to nanoparticle surface was assessed to be via carbonyl groups on the polymer. TG analysis revealed that 45 wt% of nanocomposite is inorganic phase (BaFe₁₂O₁₉). It was found out that the ac conductivity of nanocomposite under a certain frequency increases with temperature.     

Optical characterization of the silicon photodiodes for the establishment of national radiometric standards

Optical properties of the silicon photodiodes are investigated in the visible spectral regime. Non-linearity measurement standard was established by using Hamamatsu S1337-11 type windowless silicon photodiode whose non-linearity value was found to be better than 6×10⁻⁵ at photocurrent level of 10⁻⁹ to 10⁻⁴ A. Temperature effects on the spectral responsivity for S1337-11, S1337-1010BQ and S1227-1010BQ type photodiodes were analyzed between 20°C and 40°C at 488.1, 514.7 and 632.8 nm vacuum wavelengths. The spatial uniformities of the responsivity for three type photodiodes are performed with a laser beam having 1 mm diameter by using home made two-axis micro translation system. Results of the reflectance measurements for three elements of reflection-based trap detectors were compared with the predicted values obtained from Fresnel equations.     

Occupational prolonged organic solvent exposure in shoemakers: brain MR spectroscopy findings

Our purpose was to investigate, by magnetic resonance (MR) spectroscopy, the metabolite changes in the brains of subjects in the shoemaking industry who had been chronically exposed to organic solvents. A total of 49 male subjects and 30 age-matched healthy volunteers underwent detailed neurological and psychiatric examinations. All subjects had long-echo [repetition time (TR) 2000 ms, echo time (TE) 136 ms] single-voxel MR spectroscopy. Voxels (15 x 15 x 15 mm(3)) were placed in the parietal white matter, thalamus, and basal ganglia. N-acetylaspartate (NAA)/creatine (Cr) and choline (Cho)/Cr ratios were calculated. There was no significant difference between the study subjects and the control group in NAA/Cr ratios obtained from thalamus, basal ganglia, and parietal white matter. Cho/Cr ratios in thalamus, basal ganglia, and parietal white matter were found to be significantly increased compared to controls. There was a positive correlation between basal ganglia Cho/Cr ratio and duration of exposure (r = 0.63). MR spectroscopy should be performed to reveal metabolite changes and determine the degree of brain involvement in solvent-related industry workers.     

Organic/inorganic interfaced field-effect transistor properties with a novel organic semiconducting material

A novel 1,3,4-oxadiazole-substituted benzo[b]triphenylene was synthesized by three-step synthetic procedure and OFET device design was successfully designed after theoretical calculations made using Gaussian software. For investigating the field-effect properties of designed organic electronic device, a SiO₂ (300 nm) was thermally grown on p-Si wafer at 1000 °C as a dielectric layer and gate, source and drain contacts have been deposited using Au metal with physical vapour deposition. 1,3,4-Oxadiazole-substituted benzo[b]triphenylene was spin coated on the source and drain electrodes of our device, forming organic/inorganic interfaced field-effect transistors. Surface morphology and thin film properties were investigated using AFM. All electrical measurements were done in air ambient. The device showed a typical p-type channel behaviour with increasing negative gate bias voltage values. Our results have surprisingly shown that the saturation regime of this device has high mobility (μ_FET), excellent on/off ratio (I_on/I_off), high transconductance (g_m) and a small threshold voltage (V_Th). The values of μ_FET, I_on/I_off, g_m and V_Th were found as 5.02 cm²/Vs, 0.7 × 10³, 5.64 μS/mm and 1.37 V, respectively. These values show that our novel organic material could be a potential candidate for organic electronic device applications in the future.     

Low Temperature Metal-Enhanced Fluorescence

In this short letter, we describe the effects of low temperature on the Metal-Enhanced Fluorescence (MEF) phenomenon. Fluorophores close to Silver Island Films (SiFs) show on average two- to ten-fold enhancements in their fluorescence signatures at room temperature. However, at 77 K, we have observed that MEF is even more pronounced as compared to an identical glass control sample. We also demonstrate that the further enhancements in MEF occur at low temperature over a range of visible wavelengths for different fluorophores, for both SiFs and 20 nm surface deposited gold colloids.     

Investigation of chemical activity,SCHIFF base reactions and staining effects of some amino acids by spectrophotometric and theorical methods

In this study, the staining properties of selected amino acids with Brassica oleraceae extract in alum and alum-free media were investigated. Basic, acidic and neutral amino acids (arginine, glutamic acid and glycine) were used to investigate the effect of staining. It was determined that all amino acids were stained in alum media. In the second step, the R group of amino acids found in the proteins of the cell nucleus was reacted with salicyl aldehyde. This reaction was successful only with Arginine. The staining properties of the newly formed compound were also investigated in alum and alum-free environments. Evaluation of the results was done using FT-IR and ¹H NMR methods. All compounds were optimized with the Gaussian G09 program (DFT/B3LYP/6.311 ?G(d.p) basic set. HOMO, LUMO and HOMO-LUMO gap values were determined. Chemical reaction capabilities of amino acids were discussed with the help of HOMO-LUMO gap values.