Feedback stabilization of snap-through buckling in a preloaded two-bar linkage with hysteresis

We study a linearly damped preloaded two-bar linkage that exhibits hysteresis due to the presence of multiple attracting equilibria. The dynamics at the unstable equilibrium, through which a snap-through buckle occurs, are not linearizable due to a solution-dependent singularity. We stabilize the unstable equilibrium using two distinct non-linear controllers. The feedback-linearization controller requires knowledge of the linkage parameters, whereas the robust version of the intrinsic non-linear proportional-derivative controller requires only an upper bound on the stiffness.     

Liquid-liquid extraction of Th(IV) with Cyanex302

Summary Th(IV) was quantitatively extracted from 1 ^. 10^-3M HNO₃ using 1 ^. 10^-3M Cyanex302 in xylene and was stripped from the organic phase with 5M HCl. The effect of different parameters affecting the extraction was systematically studied to achieve optimum conditions for the extraction of thorium. Based on the data some separations of thorium from binary and complex mixtures and its recovery from monazite sand were achieved. The method is reproducible with a relative standard deviation of 0.4%.     

Studies on chromium(III) complexes of some new dithiocarbamato ligands

Summary Tris-chelates of chromium(III) have been synthesised with five new dithiocarbamates, [RR'NCS₂]^–, where R=PhCH₂ and R/t'=H, PhCH₂, Me, Et and i-Pr. Magnetic moments together with electronic, i.r. and e.s.r spectra of the complexes have been described. Various ligand-field parameters have been evaluated and discussed.     

Polarographische Untersuchungen von aus Cadmium(II) und Propylendiamin in wäßrigem Dimethylformamid entstandenen Komplexen

The reduction of Cd(II) in propylenediamine was found to be reversible and diffusion controlled. The complexes of Cd(II) with propylenediamine in 25%, 50%, and 75% dimethylformamide have been studied polarographically using theDeFord andHume's treatment as extended byIrving. Increase in the stability constants was observed with increase in dimethylformamide percentage. The percentage composition of the various complexed and uncomplexed species in 25% and 50% dimethylformamide are presented.     

First structural characterization of binary AsIII and SbIII azides

The highly explosive molecules As(N(3))(3) and Sb(N(3))(3) were obtained in pure form by the reactions of the corresponding fluorides with (CH(3))(3)SiN(3) in SO(2) and purification by sublimation. The crystal structures and (14)N NMR, infrared, and Raman spectra were determined, and the results compared to ab initio second-order perturbation theory calculations. Whereas Sb(N(3))(3) possesses a propeller-shaped, pyramidal structure with perfect C(3) symmetry, the As(N(3))(3) molecule is significantly distorted from C(3) symmetry due to crystal packing effects.     

Polarographic study of complexes of metal ions and dibasic acids-II Complexes of lead with malonic, succinic, glutaric and adipic acids

The malonate, succinate, glutarate and adipate complexes of lead have been examined polarographically and the overall stability constants evaluated. The values found are log beta(1) = 2.60, 2.40, 2.48, 2.38; log beta(2) = 3.62, 3.73, 3.45, 3.20; log beta(3) = 4.32, 4.11, 3.90, 3.69, for the malonate, succinate, glutarate and adipate complexes respectively.     

Effect of bromination on the thermal properties of poly(2,6-dimethyl-1,4-phenylene oxide)

The thermal behavior of poly(2,6-dimethyl-1,4-phenyiene oxide) (PPO R resin), poly(3-bromo-2,6-dimethyl-1,4-phenylene oxide), and a series of their statistical copolymers with identical average molecular lengths has been characterized by thermogravimetry and computer-interfaced differential scanning calorimetry. The heat capacities are found to be additive with respect to the concentrations of the two components. The change in heat capacity at the glass transition ( C _p) is independent of composition for bromination of up to 75% of the repeat units. At higher bromine levels C _p decreases abruptly. This behavior is attributed to the temperature dependence of C _p for the two components. The glass transition temperature (T _g) of the copolymers varies nearly linearly with composition. A comparison of the experimental values ofT _g is made with various equations derived for statistical copolymers and homogeneous polymer blends. A modification of the Couchman equation is presented taking into account the temperature dependence ofC _p.

---

Zusammenfassung Das thermische Verhalten von Poly(2.6-dimethyl-1.4-phenylenoxyd) (PPO R-Harz), Poly(3-brom-2.6-dimethyl-1.4-phenylenoxyd) und einer Reihe von statistischen Copolymeren dieser Verbindungen mit gleicher durchschnittlicher Moleküllänge wurde durch Thermogravimetrie und Differential-Scanning-Kalorimetrie mit Computerinterface charakterisiert. Die Wärmekapazitäten sind hinsichtlich der Konzentrationen der beiden Komponenten additiv. Die Veränderung in der Wärmekapazität beim Übergang zum Glas (C_p) ist unabhängig von der Zusammensetzung bei Bromierung bis zu 75% der wiederho-lungseinheiten. Bei höheren Bromierungsgraden nimmtC _p abrupt ab. Dieses Verhalten wird der Temperaturabhängigkeit vonC _p der beiden Komponenten zugeschrieben. Die Glasübergangstemperatur (T_g) der Copolymeren verändert sich nahezu linear mit der Zusammensetzung. Ein Vergleich der experimentellen Werte von T_g wird mit verschiedenen für statistische Copolymere und Mischungen homogener Polymere abgeleiteten Gleichungen ausgeführt. Eine die Temperaturabhängigkeit vonC _p berücksichtigende Modifikation der Gleichung von Couchman wird angegeben.

---

, , (2,6- -1,4), (3--2,6--1,4- ) . , ë . ë (C ) 75%. C . C . T . . T . , . , C .

---

---

This work was supported by the National Science Foundation, Polymers Program (DMR 78-15279) and the General Electric Corporate Research and Development Center. The authors are indebted to the following individuals at General Electric CRD for their experimental assistance: S. R. Weissman and P. E. Gundlach (molecular weight characterizations); D. W. Marsh (X-ray analysis); V. H. Watkins and E. L. Hall (electron microscopy); and N. A. Marotta (thermogravimetry). P. E. Donahue and E. A. Williams are gratefully acknowledged for carrying out and interpreting the NMR experiments.

---

One of the authors (R. C. Bopp) would like to thank A. R. Shultz, J. T. Bendler, and D. M. White at General Electric CRD for their helpful discussions of this work and express his sincere appreciation to Professor P. R. Couchman (Rutgers University) for his illuminating discussions of the thermodynamic basis of his equation.     

Electrode kinetics and thermodynamic study of complexes of palladium(II) at D.M.E.

Polarographic study of Pd(II) reveals that it reduces quasireversibly at d.m.e. in 0.2M-pyridine+0.1N-HCl medium. Kinetic parameters of Pd(II) in various concentrations of -resorcyclic acid were calculated usingGellings method and thus the effect of concentration of -resorcyclic acid on the kinetics of the reduction of Pd(II) has been explained.DeFord/Hume graphical extrapolation method and the mathematical method ofMihailov have been employed for the evaluation of overall formation constants of the complexes formed with -resorcyclic acid. The logarithmic values of overall formation constants ₁, ₂ and ₃ obtained by the two methods are 7.47, 8.60, 9.66 (DeFord andHume Method) and 7.44, 8.64, 9.66 (Mihailov Method) at 298 K. Thermodynamic parameters of these complexes are reported.

---

Elektrodenkinetik und thermodynamische Untersuchungen an Pd(II)-Komplexen mittels polarographie

Zusammenfassung Pd(II) zeigt eine quasireversible Reduktion in 0,2M-Pyridin/0,1N-HCl. Kinetische Parameter wurden mittels der Methode vonGelling ermittelt und damit der Effekt verschiedener -Resorcylsäurekonzentrationen erklärt. Bildungskonstanten der entsperechenden Komplexe wurden nachDeFord/Hume und nachMihailov ermittelt. Die logarithmischen Werte der Gesamtbildungskonstanten ₁, ₂ und ₃ bei 298 K betragen nach derDe Ford/Hume-Methode 7,47, 8,60 und 9,66, nach derMihailov-Methode 7,44. 8,64 und 9,66. Die thermodynamischen Parameter der Komplexbildung werden angegeben.

     

Chronopotentiometry in fused lithium chloride-potassium chloride

Previous work in the application of chronopotentiometry in aqueous and fused salt media has been reviewed. This investigation describes the application of this principle to the reduction of cadmium, cobalt, lead and thallium ions in a fused eutectic mixture of potassium, chloride and lithium. chloride at 450°C. Platinum microelectrodes of different areas and geometry were used. The transition time was limited to the order of 0.2 to 0.7 sec using oscillographic recording.It was found that so long as the dimensions of the electrode were considerably greater than the thickness of the diffusion, layer, linear diffusion theory was obeyed. The transition time constants for cadmium, cobalt, lead and thallium ions were found to be 0.83± 0.02, 0.90 ± 0.03, 0.95 ± 0.04, and 0.59 ± 0.02.10³ amp cm sec$\text{1}\text{2}$ per mole, respectively. The diffusion coefficients of these ions were calculated to be 2.08, 2.42, 2.18 and 3.88.IO^-5 cm² sec^-1, respectively.     

Studies on stability of bi-functional P3HT:PCBM:rubrene optoelectronic devices

Investigations are carried out for stability in photovoltaic response of bifunctional electroluminescent and photovoltaic devices, based on ternary blend of poly(3-hexylthiophene) (P3HT), phenyl [6,6′]C₆₁ butyric acid methyl ester (PCBM), and 5,6,11,12-tetraphenylnaphthacene (rubrene). P3HT and PCBM are important and the most frequent materials used for photovoltaic applications, therefore, for relative comparison, photovoltaic cells were also prepared using a binary mixture of P3HT and PCBM. Devices based on the ternary blend exhibited better stability in all photovoltaic parameters and the lifetime was almost doubled, but their photovoltaic efficiency was lower than that of those based on the binary blend. Longer lifetime of ternary blend devices is because of a relatively better thermal, electrochemical, and morphological stabilities of the ternary blend system. However, the lower efficiencies are because of the reduced photo-current and low fill factor (FF) due to an increased recombination and introduction of defects/trapping sites by rubrene molecules.