Effect of secondary electrons from latent tracks created in YBCO by swift heavy ion irradiation

Swift heavy ions (SHI) with electronic energy loss exceeding a value of 14.4 keVnm⁻¹ create amorphized latent tracks in YBCO type superconductors. In the low fluence regime of an ion beam where tracks do not overlap, a decrease of the superconducting transition temperature as probed through resistivity studies, is not expected due to availability of percolating current paths. The present study however shows T_c decrease by about 1–3 K in thin films of YBCO when irradiated by 250 MeVAg ions at 79 K at a fluence of 5×10¹⁰–1×10¹² ionscm⁻². The highest fluence used in the present study is three times less than the fluence where track overlapping becomes significant. The T_c tends to increase towards the preirradiation value on annealing the films at room temperature. To explain this unusual result, we consider the effect of ion irradiation in inducing materials modification not only through creation of amorphized latent tracks along the ion path, but also through creation of atomic disorder in the oxygen sublattice in the Cu–O chains of YBCO by the secondary electrons. These electrons are emitted radially from the tracks during the passage of the SHI. Considering the correlation between the charge state of copper and its oxygen coordination, we show in particular that the latter process is a consequence of the inelastic interaction of the SHI induced low-energy secondary electrons with the YBCO lattice, which result in chain oxygen disorder and T_c decrease.     

Synchronized whistlers recorded at Varanasi

Some interesting events of synchronized whistlers recorded at low latitude station Varanasi during magnetic storm period of the year 1977 are presented. The dynamic spectrum analysis shows that the component whistlers are Eckersley whistlers having dispersion 10 s^1/2 and 30 s^1/2. An attempt has been made to explain the dynamic spectra using lightning discharge generated from magnetospheric sources     

An automated laboratory EXAFS spectrometer of Johansson type: indigenous development and testing

An automated linear laboratory EXAFS spectrometer of the Johansson type has been indigenously developed. Only two translational motions are required to achieve the necessary Rowland circle configuration for the (fixed) X-ray source, the dispersing and focusing bent crystal and the receiving slit. With the available crystals the spectral region from 5 to 25 keV can be scanned. The linear motions of the crystal and receiving slit including the detector assembly are achieved by employing software-controlled DC motors and utilizing optical encoders for position sensing. The appropriate rotation of the crystal is achieved by the geometry of the instrument. There is a facility to place the sample alternately in the path of the X-ray beam and out of the path to record both the incident X-ray intensityI ₀ and the transmitted intensityI employing the scintillation detector. An arrangement with a two-window proportional detector before the sample to measureI ₀ and the scintillation detector to recordI is also developed; in this case it is not necessary to oscillate the sample. Fast electronic circuits are employed to minimize counting errors. The instrument is user-friendly and it is operated through a menu-driven IBM compatible PC. EXAFS spectra of high resolution have been recorded using the spectrometer and employing the Si(111) reflecting planes; the X-ray source being a Rigaku 12 kW rotating anode with Cu target. We describe the spectrometer and discuss its performance with a few representative spectra.     

Buckling of laminated plates - A simple finite element based on higher-order theory

A four-noded rectangular element with seven degrees of freedom at each node is developed for buckling analysis of laminated plate structures having any number of layers with a constant thickness of individual layers. The displacement model is so chosen that it can explain adequately the parabolic distribution of transverse shear stresses and the non-linearity of in-plane displacements across the thickness. A geometrical stiffness matrix is developed using in-plane stresses. A wide range of plates from thick to thin are examined under uniaxial loading conditions. The results are compared with the existing analytical and numerical solutions. The present formulations confirm its applicability for buckling analysis of a wide range of plates.     

Asymptotic analysis of the effect of arrival model uncertainties in some optimal routing problems

We study the effect of arrival model uncertainties on the optimal routing in a system of parallel queues. For exponential service time distributions and Bernoulli routing, the optimal mean system delay generally depends on the interarrival time distribution. Any error in modeling the arriving process will cause a model-based optimal routing algorithm to produce a mean system delay higher than the true optimum. In this paper, we present an asymptotic analysis of the behavior of this error under heavy traffic conditions for a general renewal arrival process. An asymptotic analysis of the error in optimal mean delay due to uncertainties in the service time distribution for Poisson arrivals was reported in Ref. 6, where it was shown that, when the first moment of the service time distribution is known, this error in performance vanishes asymptotically as the traffic load approaches the system capacity. In contrast, this paper establishes the somewhat surprising result that, when only the first moment of the arrival distribution is known, the error in optimal mean delay due to uncertainties in the arrival model is unbounded as the traffic approaches the system capacity. However, when both first and second moments are known, the error vanishes asymptotically. Numerical examples corroborating the theoretical results are also presented.This work was supported by the National Science Foundation under Grants ECS-88-01912 and EID-92-12122 and by NASA under Contract NAG 2-595.The authors wish to thank an anonymous referee for pointing out Ref. 20, thus avoiding the need for an explicit proof of convexity of the cost function considered in the paper.     

Photoinduced dissociative electron transfer (DET) interactions in methoxycalixarene–chloroalkane systems

Fluorescence quenching of methoxycalixarenes (MOCX) by chloroalkanes (CA) has been investigated in acetonitrile solutions. Observed quenching is attributed to photoinduced dissociative electron transfer (DET) interaction, which is supported by the characterization of the Cl⁻ ions and by the radical scavenging experiments. Comparing the Cl⁻ yields with different DET systems, it is inferred that both concerted and stepwise DET mechanisms operate simultaneously in MOCX–CA systems. A correlation of the quenching constants with the free-energy changes following a suitable DET theory supports the above inference.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003