Silver(I)-selective coated-wire electrode based on an octahydroxycalix[4]arene derivative.

The performance of octahydroxycalix[4]arene derivative used as a neutral carrier for silver polymeric membrane electrode was studied. The sensor gave a good Nernstian response of 58 +/- 1 mV per decade for silver ion in the activity range 3.3 x 10(-6) to 3.3 x 10(-2) M Ag+. The limit of detection reached 2.1 x 10(-6) M Ag+ and exhibited high selectivity for silver ion against the alkali, alkaline earth and transition metal ions. The sensor can be used in wide pH range from 1.5 to 6.5. The response time of the sensor is less than 20 s. The potentiometric sensor was used as the indicator electrode in the titration of Ag+ ions by sodium chloride solution.     

A Complete Classification of Curvature Collineations of Cylindrically Symmetric Static Metrics

Curvature collineations are symmetry directions for the Riemann tensor, as isometries are for the metric tensor and Ricci collineations are for the Ricci tensor. Complete listings of many metrics possessing some minimal symmetry have been given for a number of symmetry groups for the latter two symmetries. It is shown that a claimed complete listing of cylindrically symmetric static metrics by their curvature collineations [1] was actually incomplete and is completed here. It turns out that in this complete list, unlike the previous claim, there are curvature collineations that are distinct from the set of isometries and of Ricci collineations. The physical interpretation of some of the metrics obtained is given.     

On a property of conformal spacetimes

A generalisation of Carter's Circular metrics has been used for working out N potentials. It is pointed out here that the conformal extension of these metrics has the interesting property that the conformal time-like Killing vector depends only on time.

---

Zusammenfassung Bekanntlich existieren Raum-Zeit-Mannigfaltigkeiten, welche keine zeitartige Isometrie zulassen. In der vorliegenden Arbeit wird gezeigt: Falls die Metriken diese Raum-Zeit-Mannigfaltigkeiten als spezielle Verallgemeinerung der Carterschen zirkularen Metriken so gewählt werden, daß sie einen konformen zeitartigen Killing-Vektor zulassen, dann hängt dieser Vektor nur von der Zeit ab.

     

Rapid interspecies energy flow between vibrationally excited SF6 and the asymmetric stretch of N2O

Rapid, selective collision-dependent excitation of N₂O following pumping of SF₆ with a CO₂ laser is reported. The N₂O fluorescence rise depends on the pressure of each component and is dominated by the SF₆-dependent contribution of 2290 ms^?1 Torr^?1. The subsequent fall is governed by V→V processes among SF₆ vibrational modes.     

N-Iodosuccinimide (NIS) as a mild and highly chemoselective catalyst for deprotection of tert-butyldimethylsilyl ethers

A variety of alcoholic TBDMS (t-butyldimethylsilyl) ethers are easily removed in excellent yields by treatment with a catalytic amount of N-iodosuccinimide (NIS, 5 mol %) in methanol. This method is able to deprotect TBDMS ethers of alcohols in the presence of TBDMS ethers of phenols.     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.     

Deactivation of vibrationally excited CD3H using laser-induced fluorescence

Infrared fluorescence observed after exciting to ν₆ (ν=1) of CD₃H with a Q-switched CO₂ laser yields the exponential deactivation rate constant of 0.84 ms^?1 torr^?1. Rate constants for deactivation of CD₃H by rare gases vary from 1.4 (for He) to 0.029 (for Xe) ms^?1 torr^?1.     

Highly selective transport of silver ion through a supported liquid membrane using calix[4]pyrroles as suitable ion carriers

Facilitated transport of silver ion across a supported liquid membrane (SLM) by calix[4]pyrroles, as selective ion carriers, dissolved in kerosene has been investigated. The influences of fundamental parameters affecting the transport of silver ion including ion carrier concentration in the membrane phase, thiosulfate concentration in strip phase, picric acid concentration in the feed phase, stirring speed of aqueous phases, type of membrane solvent and time of transport have been studied. In the presence of thiosulfate as a suitable metal ion acceptor in the strip phase and picrate ion as ion pairing agent in the source phase, transport of silver occurs almost quantitatively after 75 min. The selectivity and efficiency of silver transport from aqueous solution containing Cu²⁺, Mg²⁺, Ni²⁺, Ca²⁺, Zn²⁺, Pb²⁺, Co²⁺, Al³⁺, Hg²⁺, Cd²⁺, Fe³⁺, Fe²⁺ and Cr³⁺ were investigated.     

Structural,dielectric and electrical properties of zinc doped nickel nanoferrites prepared by simplified sol–gel method

Zinc doped nickel ferrite nanoparticles having the general formula Ni_1−xZn_xFe₂O₄ (x = 0.1, 0.2, 0.3, 0.4, 0.5) were prepared with simplified sol–gel method. The structural and dielectric properties of these samples sintered at 750 ± 5 °C were studied. X-ray diffraction patterns confirm the single phase spinel structure for prepared samples. The scanning electron microscope images indicated that the particle size of the samples lies in the nanometer regime. The dielectric constant (ε_r) and dielectric loss tangent (tan δ) of nanocrystalline nickel ferrites were investigated as a function of frequency and Zn concentration. The dependence of ε_r and tan δ on the frequency of the alternating applied electric field is in accordance with the Maxwell–Wagner model. The prepared samples have a lowest dielectric constant compared to the already reported samples of the same composition to the best of our knowledge. The effect of Zn doping on the dielectric properties of nickel ferrites is explained on the basis of cations distribution in the crystal structure.     

Enhancing of asphaltene adsorption onto Fe3O4 nanoparticles coated with metal-organic framework Mil-101 (Cr) for the inhibition of asphaltene precipitation

In this study, the potential of MOF (Mil-101-Cr)-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MOF MNPs) for asphaltene adsorption was investigated for the first time and the results were compared with magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs). The coprecipitation method was used for the synthesis of both nanoparticles and were verified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). The initial asphaltene concentration, nanoparticles concentration, and temperature were the investigated parameters that influenced the adsorption capacity. Increasing the asphaltene concentration, decreasing the mass of nanoparticles, and reducing the temperature could enhance the maximum asphaltene adsorption capacities of 0.79 for Fe₃O₄ MNPs and 0.98?mg?m^?2 for Fe₃O₄-MOF MNPs. Adsorption isotherms tests showed that the Langmuir model was in agreement with the experimental data. In addition, the evaluation of adsorption kinetics demonstrated that the pseudo-second-order Lagergren model predicted the results more precisely. The amount of asphaltene adsorption for Fe₃O₄-MOF MNPs was higher than that for Fe₃O₄ MNPs. These results recommend the application of MOF as an appropriate and effective coating for enhancing asphaltene adsorption.