Pt coated Cr2O3 thin films for resistive gas sensors

The resistive response of atomic layer deposited thin epitaxial α-Cr₂O₃(0 0 1) films, to H₂ and CO in air, was studied. The films were covered with Pt nanoislands formed by electron-beam evaporation of a sub-monolayer amount of the material. The gas measurements were performed at 250°C and 450°C. These temperatures led to different proportion of chemical states, Pt²⁺ and Pt⁴⁺, to which the Pt oxidized. The modification was ascertained by the X-ray photoelectron spectroscopy method. As a result of the modification, the response was fast at 250°C, but slowed at 450°C. A disadvantageous abundance of Pt⁴⁺ arising at 450°C in air could be diminished by high-vacuum annealing thus restoring the response properties of the system at 250°C.      

Experimental investigation of various turbulator inserts in gas-heated channels

This experimental research was focused on the investigation of the heat transfer augmentation by various turbulator inserts in gas-heated channels. The work was conducted directly in a convective part of a two fire-tube boiler. The flue ducts were positioned vertically and horizontally for various design applications. Twisted-tape insert (with the twist ratio y=4.12), the straight-tape insert, and the combined turbulator insert (the internal twisted tape with the twist ratio of 180° y=2.16 and an external tape, which spirally winded on an internal tape, with longitudinal pitch H_360°=110 mm and the relative height of a tape (rib) e/D₀=0.098;0.2) were investigated. The working fluids were the combustion products of light oil fuel and wood pellets. In addition, the experiments were conducted in the two fire-tube boiler without any inserts. Despite of relatively large data scattering obtained in these experiments some qualitative and quantitative conclusions were drawn.     

Study of Thin Oxide Films by Electron, Ion and Synchrotron Radiation Beams

 Titanium oxide and zirconium oxide thin films deposited on silicon substrates were characterised using electron probe microanalysis (EPMA), Rutherford backscattering spectroscopy (RBS), time-of-flight elastic recoil detection analysis (TOF-ERDA) and scanning photoelectron microscopy (SPEM). The composition and mass thickness of the films were determined and the results of different methods compared. It was revealed that the synchrotron radiation used for SPEM studies caused considerable modification of zirconia films grown at low temperatures.     

Effects of precursors on nucleation in atomic layer deposition of HfO2

Atomic layer deposition of hafnium dioxide (HfO₂) on silicon substrates was studied. It was revealed that due to low adsorption probability of HfCl₄ on silicon substrates at higher temperatures (450–600 °C) the growth was non-uniform and markedly hindered in the initial stage of the HfCl₄–H₂O process. In the HfI₄–H₂O and HfI₄–O₂ processes, uniform growth with acceptable rate was obtained from the beginning of deposition. As a result, the HfI₄–H₂O and HfI₄–O₂ processes allowed deposition of smoother, more homogeneous and denser films than the HfCl₄–H₂O process did. The crystal structure developed, however, faster at the beginning of the HfCl₄–H₂O process.     

Nanoformulation and Evaluation of Oral Berberine-Loaded Liposomes

Berberine (BBR) is a poorly water-soluble quaternary isoquinoline alkaloid of plant origin with potential uses in the drug therapy of hypercholesterolemia. To tackle the limitations associated with the oral therapeutic use of BBR (such as a first-pass metabolism and poor absorption), BBR-loaded liposomes were fabricated by ethanol-injection and thin-film hydration methods. The size and size distribution, polydispersity index (PDI), solid-state properties, entrapment efficiency (EE) and in vitro drug release of liposomes were investigated. The BBR-loaded liposomes prepared by ethanol-injection and thin-film hydration methods presented an average liposome size ranging from 50 nm to 244 nm and from 111 nm to 449 nm, respectively. The PDI values for the liposomes were less than 0.3, suggesting a narrow size distribution. The EE of liposomes ranged from 56% to 92%. Poorly water-soluble BBR was found to accumulate in the bi-layered phospholipid membrane of the liposomes prepared by the thin-film hydration method. The BBR-loaded liposomes generated by both nanofabrication methods presented extended drug release behavior in vitro. In conclusion, both ethanol-injection and thin-film hydration nanofabrication methods are feasible for generating BBR-loaded oral liposomes with a uniform size, high EE and modified drug release behavior in vitro.     

The electrochemical behaviour of butyltrimethylammonium bis(trifluoromethylsulfonyl)imide at negatively polarised aluminium electrode studied by in situ soft X-ray photoelectron spectroscopy,electrochemical impedance spectroscopy and cyclic voltammetry techniques

The in situ X-ray photoelectron spectroscopy data indicate that butyltrimethylammonium bis(trifluoromethylsulfonyl)imide (N4111(TFSI)) adsorbs strongly within the potential range −3.25 V < E < −2.25 V and specifically at E < −3.25 V (vs. Ag-QRE) at the Al electrode. Strong adsorption of the intermediates of N4111(TFSI) electrochemical decomposition was observed in electrochemical impedance spectroscopy and cyclic voltammetry measurements. At E < −4.25 V (vs. Ag-QRE), very intensive electrochemical reduction of N4111(TFSI) took place at the Al electrode giving gaseous products. In the potential range from − 2.25 to 0.00 V (vs. Ag-QRE), non-specific adsorption of N4111(TFSI) exists et al. surface.

     

Electroreduction of oxygen on cobalt phthalocyanine-modified carbide-derived carbon/carbon nanotube composite catalysts

Journal of Solid State Electrochemistry - In this work, composite materials based on carbide-derived carbon (CDC) and carbon nanotubes (CNT) modified with Co phthalocyanine (CoPc) were employed as...     

Effect of partial oxidation and repolarization of TiC-derived nanoporous carbon electrodes on supercapacitor performance using a pH-neutral aqueous electrolyte

Journal of Solid State Electrochemistry - The present study considers TiC-derived carbon (CDC) and its partially oxidized derivative (ox-red-CDC) as potential electrode materials for pH-neutral...     

Near and mid-infrared photoacoustic analysis of principal components of foodstuffs

Photoacoustic spectroscopy, especially in the near infrared, for principal food component analysis (protein, fat, carbohydrate and moisture contents) is discussed. The thermal diffusion length is discussed as is the problem of signal saturation. An illustrative comparison of photoacoustic spectroscopy and Fourier transform mid-infrared-attenuated total reflectance spectroscopy (FTIR-ATR) as applied to cheese analysis is given.