Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Applications of chalcogenide glass optical fibers

Chalcogenide-glass fibers based on sulfide, selenide, telluride and their rare-earth-doped compositions are being actively pursued worldwide. Great strides have been made in reducing optical losses using improved chemical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, chalcogenide-glass fibers are enabling numerous applications that include laser power delivery, chemical sensing, and imaging, scanning near field microscopy/spectroscopy, IR sources/lasers, amplifiers and optical switches.     

A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

Studies on controlled potential coulometric determination of gallium in sodium perchlorate and sodium thiocyanate

Controlled potential coulometric (CPC) studies were carried out for developing a method to determine gallium at milligram levels, in the mixed supporting electrolyte medium (4 M NaClO₄ + 0.5 M NaSCN), employing stirring mercury as a working electrode. Investigations for optimization of working electrode potentials, quantity of charge, level of background current and electrolysis time for achieving quantitative reduction of Ga(III) to Ga and its oxidation back to Ga(III), were undertaken. Effect of gallium content and interference of zinc in of gallium determination were also studied. The developed methodology was employed for the determination of gallium in pure Ga as well as in synthetic U + Ga mixture solutions. Accuracy and precision values of better than 0.5% were obtained at 1-2 mg levels.     

Mathematical Correction for Polyatomic Isobaric Spectral Interferences in Determination of Lanthanides by Inductively Coupled Plasma Mass Spectrometry

The determination of lanthanides by Inductively Coupled Plasma Mass Spectrometry (ICP‐MS) is complicated by several spectral overlaps from M⁺, MO⁺ or MOH⁺ ions formed in the ICP. Especially, it is essential to avoid the spectral interferences from lighter lanthanide and Ba polyatomic ions on middle or heavier lanthanides. To tackle this problem, we have developed a mathematical correction method, which reduces all the spectral overlaps from oxide species of Pr, Nd, Ce and Sm over Gd, Tb, Dy and Ho, and Gd, Tb over Yb and Lu. It can also successfully correct the oxide and hydroxide interference of Ba over Eu. The effectiveness of the proposed the mathematical correction scheme is demonstrated for the USGS Standard Rock samples AGV‐1 and G‐2. The results show that the experimental data obtained by applying the mathematical correction scheme for lanthanides is in good agreement with the reported values, using pneumatic and ultrasonic nebulisation methods, for their ICP‐MS analysis.