Reaction of 4-nitro-1,2-phenylenedl4mine with 1-(4-R-phenyl)-3-(4-nitrophenyl)propenones

By the reaction of 4-nitro-1,2 phenylenediamine with 1-(p-R-phenyl)-3-(4-nitrophenyl)propenones, Michael adducts with a 1:2 composition have been obtained. A stagewise scheme is proposed for the formation of these compounds. The structure of one of the products has been established by means of x-ray structure analysis.Deceased     

Metallic behavior and periodical valence ordering in a MMX chain compound, Pt(2)(EtCS(2))(4)I.

A new one-dimensional (1-D) halogen-bridged mixed-valence diplatinum(II,III) compound, Pt(2)(EtCS(2))(4)I (3), has been successfully synthesized from [Pt(2)(EtCS(2))(4)] (1) and [Pt(2)(EtCS(2))(4)I(2)] (2). These three compounds have been examined using UV-visible-near-IR, IR, polarized Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray crystal structure analyses (except for 1). Compound 3 was further characterized through electrical transport measurements, determination of the temperature dependence of lattice parameters, X-ray diffuse scattering, and SQUID magnetometry. 3 crystallizes in the monoclinic space group C2/c and exhibits a crystal structure consisting of neutral 1-D chains with a repeating -Pt-Pt-I- unit lying on the crystallographic 2-fold axis parallel to the b axis. The Pt-Pt distance at 293 K is 2.684 (1) A in the dinuclear unit, while the Pt-I distances are essentially equal (2.982 (1) and 2.978 (1) A). 3 shows relatively high electrical conductivity (5-30 S cm(-1)) at room temperature and undergoes a metal-semiconductor transition at T(M-S) = 205 K. The XPS spectrum in the metallic state reveals a Pt(2+) and Pt(3+) mixed-valence state on the time scale of XPS spectroscopy ( approximately 10(-17) s). In accordance with the metal-semiconductor transition, anomalies are observed in the temperature dependence of the crystal structure, lattice parameters, X-ray diffuse scattering, and polarized Raman spectra near T(M-S). In variable-temperature crystal structure analyses, a sudden and drastic increase in the Pt-I distance near the transition temperature is observed. Furthermore, a steep increase in U(22) of iodine atoms in the 1-D chain direction has been observed. The lattice parameters exhibit significant temperature dependence with drastic change in slope at about 205-240 K. This was especially evident in the unit cell parameter b (1-D chain direction) as it was found to lengthen rapidly with increasing temperature. X-ray diffraction photographs taken utilizing the fixed-film and fixed-crystal method for the metallic state revealed the presence of diffuse scattering with line shapes parallel to the a* axis indexed as (-, n + 0.5, l) (n; integer). Diffuse scattering with k = n + 0.5 is considered to originate from the 2-fold periodical ordering corresponding to -Pt(2+)-Pt(2+)-I-Pt(3+)-Pt(3+)-I- or -Pt(2+)-Pt(3+)-I-Pt(3+)-Pt(2+)-I- in an extremely short time scale. Diffuse lines corresponding to 2-D ordering progressively decrease in intensity below 252 K and are converted to the diffuse planes corresponding to 1-D ordering near T(M-S). Furthermore, diffuse planes condensed into superlattice reflections below T(M-S). Polarized Raman spectra show temperature dependence through a drastic low-energy shift of the Pt-I stretching mode and also through broadening of bands above T(M-S).     

Synthesis of New Lithium Ionic Conductor Thio-LISICON—Lithium Silicon Sulfides System

The new lithium ionic conductors, thio-LISICON (LIthium SuperIonic CONductor), were found in the ternary Li₂S-SiS₂-Al₂S₃ and Li₂S-SiS₂-P₂S₅ systems. Their structures of new materials, Li_4+xSi_1−xAl_xS₄ and Li_4−xSi_1−xP_xS₄ were determined by X-ray Rietveld analysis, and the electric and electrochemical properties were studied by electronic conductivity, ac conductivity and cyclic voltammogram measurements. The structure of the host material, Li₄SiS₄ is related to the γ-Li₃PO₄-type structure, and when the Li⁺ interstitials or Li⁺ vacancies were created by the partial substitutions of Al³⁺ or P⁵⁺ for Si⁴⁺, large increases in conductivity occur. The solid solution member x=0.6 in Li_4−xSi_1−xP_xS₄ showed high conductivity of 6.4×10^-4 S cm⁻¹ at 27°C with negligible electronic conductivity. The new solid solution, Li_4−xSi_1−xP_xS₄, also has high electrochemical stability up to ∼5 V vs Li at room temperature. All-solid-state lithium cells were investigated using the Li_3.4Si_0.4P_0.6S₄ electrolyte, LiCoO₂ cathode and In anode.     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.     

Structures of 17,19-hexatriacontadiyne monolayers on Au(111) studied by infrared reflection absorption spectroscopy and scanning tunneling microscopy

The aggregation and reaction of 17,19-hexatriacontadiyne molecules are studied on a Au(111) surface. The molecular orientation and arrangement are elucidated by infrared reflection absorption spectroscopy (IRAS) and scanning tunneling microscopy (STM). A vapor-deposited monolayer and a multilayered film formed by adsorption from the solution provide IRA spectra with bands due to the antisymmetric and symmetric stretching of methylenes in the gauche conformation. After the adsorbed film is rinsed with the solvent, however, the spectrum loses the gauche bands and is characterized by the enhanced C-H(distal) and C-H(proximal) stretching bands, which means that all-trans molecules are laid flat. Only STM images for the rinsed film display columnar structures on the herringbones of the reconstructed Au(111) surface; the alkyl chain direction is found to be parallel to the Au atom row. The results indicate that an ordered monolayer is formed first at the liquid-solid interface, and then, disordered overlayers with the gauche conformation are grown but removed by a rinse. Upon exposure to UV light, thus obtained monomer columns are converted into oligomers with flexible backbones and an increased gauche population in the alkyl chains, which resemble red phase polydiacetylenes in LB films.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Photobleaching of bacteriorhodopsin solubilized with triton X-100

In the current studies, we examined the effects of hexagonal lattice formation with lipid membranes on the structural stability of native bacteriorhodopsin (bR). Denaturation kinetic measurements for bR solubilized with the mild nonionic detergent Triton X-100 (TX100) were performed in the dark and under illumination by visible light. The solubilized bR was stable in the dark over a wide concentration range of TX100 (1 to 200 mM). In purple membranes, a bilobed band was observed in visible circular dichroism spectra due to interactions between neighboring chromophores. At all concentrations of TX100, this was replaced by a single positive band. Upon illumination with visible light, TX100-solubilized bR clearly showed photobleaching to bacterioopsin. These experimental results suggest that photobleaching is due to a lack of intermolecular interactions inside the purple membrane lattice. Extensive kinetic measurements further revealed that the rate constant of photobleaching is strongly dependent on the detergent concentration, although the activation energy for photobleaching does not significantly change with the TX100 concentration. The mechanism of photobleaching for the solubilized bR is discussed with respect to detergent micelle properties.     

Studies on the oxidative cyclization of 3-hydroxyalkyl-1,2,4-trialkoxynaphthalenes and synthetic application for the biologically active natural compound rhinacanthone

The oxidative intramolecular cyclization of 3-hydroxyalkyl-1,2,4-trimethoxynaphthalenes was investigated. A series of 1,2-naphthoquinone fused cyclic ethers were synthesized directly from 3-hydroxyalkyl-1,2,4-trimethoxynaphthalenes by exposure to diammonium cerium (IV) nitrate. To understand the reaction mechanism, the intramolecular cyclization of 3-hydroxyalkyl-naphthoquinones that were formed as reaction intermediates was also examined. The results suggested that the reaction proceeds by a stepwise oxidation–cyclization mechanism. Using this methodology, five-step synthesis of rhinacanthone was achieved with high yield.     

Recovery process of respiratory muscle strength in patients following stroke: A Pilot Study

Objective: To determine the recovery process of respiratory muscle strength during 3 months following stroke, and to investigate the association of change in respiratory muscle strength and physical functions. Additionally, we compared respiratory muscle strength with those of healthy subjects. Method: In this prospective, observational study, 19 stroke patients and 19 healthy subjects were enrolled. Maximal inspiratory pressure (MIP), maximal expiratory pressure (MEP), motricity index, trunk control test, 6-minute walk test (6MWT) and functional independence measure were assessed at 1, 2, and 3 months from stroke onset in stroke patients. MIP and MEP were assessed at arbitrary times in healthy subjects. Repeated one-way analysis of variance with Bonferroni post-hoc test was used to compare the change in respiratory muscle strength in each period in stroke patients. Pearson''s correlation coefficient was computed for changes in respiratory muscle strength and physical functions. Student''s t-test was used to compare respiratory muscle strength between stroke patients at 3 months from onset and healthy subjects. Results: MIP was significantly increased at 3 months compared to 1 month. MEP was significantly increased in 2 months and 3 months, compared to 1 month. MIP changes associated with 6MWT changes. Compared to healthy subjects, MIP and MEP at 3 months were significantly lower in stroke patients. Conclusion: Respiratory muscle strength significantly increased during 3 months following stroke. However, the trend of recovery may be different. MIP changes may associated with walking endurance changes. During 3 months following stroke, respiratory muscle strength did not recover to healthy subjects.