Synthesis,thermal analysis,and spectroscopic and structural characterizations of tetranuclear nickel(II) cubane-type clusters with 2-hydroxybenzaldehydes or 2-hydroxyphenones

In this study, three novel tetranuclear nickel(II) cubane-type clusters with the general formula [Ni₄(L)₄(μ₃-CH₃O)₄(CH₃OH)₄] [L: the anion of 5-methyl-2-hydroxybenzaldehyde (1), 2-hydroxypropiophenone (2), and 2-hydroxybenzophenone (3)] were synthesized and characterized by single-crystal X-ray diffraction analysis. The crystal structure of each compound contains a tetranuclear cubane core [Ni₄O₄] based on an approximately cubic array of altering nickel and oxygen atoms with intracluster metal–metal separations of 3.04–3.14 Å. Each Ni(II) atom is surrounded by two oxygen atoms from the ligand (L) and by the μ₃-CH₃O oxygen atom that bridges three Ni atoms of the cubane core. The coordination sphere of Ni is completed with one methanol molecule and making six-coordinate with a distorted octahedral geometry. These complexes were characterized also by spectroscopy (IR and UV–Vis). Simultaneous TG/DTG–DTA techniques were used to analyze their thermal behavior under inert atmosphere, with particular attention to determine their thermal degradation pathways, which was found to be a multi-step decomposition accompanied by the release of the ligand molecules. Finally, the kinetic analysis of the decomposition processes was performed for the first step of complex (3), since only this verifies the requirement of applying an isoconversional method like Kissinger–Akahira–Sunose (KAS). For this step, we found the average value E _a = 107.8 ± 4.5 kJ mol^?1.     

Preventive doping control analysis: liquid and gas chromatography time-of-flight mass spectrometry for detection of designer steroids

A new combined doping control screening method for the analysis of anabolic steroids in human urine using liquid chromatography/electrospray ionization orthogonal acceleration time-of-flight mass spectrometry (LCoaTOFMS) and gas chromatography/electron ionization orthogonal acceleration time-of-flight mass spectrometry (GCoaTOFMS) has been developed in order to acquire accurate full scan MS data to be used to detect designer steroids. The developed method allowed the detection of representative prohibited substances, in addition to steroids, at concentrations of 10 ng/mL for anabolic agents and metabolites, 30 ng/mL for corticosteroids, 500 ng/mL for stimulants and beta-blockers, 250 ng/mL for diuretics, and 200 ng/mL for narcotics. Sample preparation was based on liquid-liquid extraction of hydrolyzed human urine, and the final extract was analyzed as trimethylsilylated derivatives in GCoaTOFMS and underivatized in LCoaTOFMS in positive ion mode. The sensitivity, mass accuracy, advantages and limitations of the developed method are presented.     

Development and validation of a liquid chromatographic/electrospray ionization mass spectrometric method for the determination of benazepril, benazeprilat and hydrochlorothiazide in human plasma

A new method was developed and fully validated for the quantitation of benazepril, benazeprilat and hydrochlorothiazide in human plasma. Sample pretreatment was achieved by solid-phase extraction (SPE) using Oasis HLB cartridges. The extracts were analysed by high-performance liquid chromatography (HPLC) coupled to a single-quadrupole mass spectrometer (MS) with an electrospray ionization interface. The MS system was operated in selected ion monitoring (SIM) modes. HPLC was performed isocratically on a reversed-phase porous graphitized carbon (PGC) analytical column (2.1 x 125.0 mm i.d., particle size 5 microm). The mobile phase consisted of 55% acetonitrile in water containing 0.3% v/v formic acid and pumped at a flow rate of 0.15 ml min(-1). Chlorthalidone was used as the internal standard (IS) for quantitation. The assay was linear over a concentration range of 5.0-500 ng ml(-1) for all the compounds analysed, with a limit of quantitation of 5 ng ml(-1) for all the compounds. Quality control (QC) samples (5, 10, 100 and 500 ng ml(-1)) in five replicates from three different runs of analyses demonstrated intra-assay precision (coefficient of variation (CV) < or =14.6%), inter-assay precision (CV < or = 5.6%) and overall accuracy (relative error less than -8.0%). The method can be used to quantify benazepril, benazeprilat and hydrochlorothiazide in human plasma, covering a variety of pharmacokinetic or bioequivalence studies.     

Synthesis, thermal analysis, and spectroscopic and structural characterizations of zinc(II) complexes with salicylaldehydes

In this study, three new zinc(II) complexes with 5-substituted salicylaldehyde ligands (X-saloH) (X = 5-chloro, 5-nitro and 5-methyl) with the general formula [Zn(X-salo)₂(CH₃OH)n], (n = 0 or 2) were synthesized. An octahedral geometry was found for both the complexes [Zn(5-NO₂-salo)₂(CH₃OH)₂] and [Zn(5-Cl-salo)₂(CH₃OH)₂] by single-crystal X-ray diffraction analysis. These complexes were characterized also by spectroscopy (IR and ¹H-NMR). Simultaneous TG/DTG–DTA techniques were used to analyze their thermal behavior under inert atmosphere, with particular attention to determine their thermal degradation pathways, which was found to be a multi-step decomposition accompanied by the release of the ligand molecules. Finally, the kinetic analysis of the decomposition processes was performed by applying both the isoconversional Ozawa–Flynn–Wall (OFW) and the Kissinger–Akahira–Sunose (KAS) methods.     

An Improved Narrow-Bore LC Method for Quantification of Alfuzosin in Pharmaceutical Formulations

A simple rapid and stability-indicating LC method using a narrow-bore column has been developed, fully validated, and applied to the quantification of alfuzosin in pharmaceutical formulations. Chromatography was achieved isocratically on a narrow-bore, 5-μm particle size, C₈ analytical column. The mobile phase was a 35:65 (v/v) 0.0125 m ammonium formate–acetonitrile at a flow rate of 0.35 mL min^?1. Detection was by UV absorption at 245 nm. Evaluation over the range 200–800 ng mL^?1 revealed linearity was good. Limits of detection and quantification for alfuzosin were 22.9 and 69.5 ng mL^?1, respectively. Intra-day and inter-day RSD were less than 6.4%, and the relative percentage error was less than ?1.7% (n = 5). Accelerated degradation performed under different stress conditions including oxidation, hydrolysis, and heat, proved the selectivity of the procedure. The method was successfully used for quality-control and content-uniformity testing of commercial tablets.     

Design of Multifaceted Antioxidants: Shifting towards Anti-Inflammatory and Antihyperlipidemic Activity

Oxidative stress and inflammation are two conditions that coexist in many multifactorial diseases such as atherosclerosis and neurodegeneration. Thus, the design of multifunctional compounds that can concurrently tackle two or more therapeutic targets is an appealing approach. In this study, the basic NSAID structure was fused with the antioxidant moieties 3,5-di-tert-butyl-4-hydroxybenzoic acid (BHB), its reduced alcohol 3,5-di-tert-butyl- 4-hydroxybenzyl alcohol (BHBA), or 6-hydroxy-2,5,7,8-tetramethylchromane-2-carboxylic acid (Trolox), a hydrophilic analogue of α-tocopherol. Machine learning algorithms were utilized to validate the potential dual effect (anti-inflammatory and antioxidant) of the designed analogues. Derivatives 1–17 were synthesized by known esterification methods, with good to excellent yields, and were pharmacologically evaluated both in vitro and in vivo for their antioxidant and anti-inflammatory activity, whereas selected compounds were also tested in an in vivo hyperlipidemia protocol. Furthermore, the activity/binding affinity of the new compounds for lipoxygenase-3 (LOX-3) was studied not only in vitro but also via molecular docking simulations. Experimental results demonstrated that the antioxidant and anti-inflammatory activities of the new fused molecules were increased compared to the parent molecules, while molecular docking simulations validated the improved activity and revealed the binding mode of the most potent inhibitors. The purpose of their design was justified by providing a potentially safer and more efficient therapeutic approach for multifactorial diseases.     

Organic Spacers in 2D Perovskites: General Trends and Structure-Property Relationships from Computational Studies

Addition of large organic molecules to halide perovskites has been shown to provoke dimensionality reduction and formation of two-dimensional phases that demonstrate improved long-term stabilities. Optoelectronic properties of the resulting 2D layered perovskites are strongly influenced by the chemical nature of the additive molecules, which opens immense possibilities for preparation of materials with tailored properties. However, given the huge chemical space of possible organic spacers, a systematic and exhaustive search for optimal compounds is impossible and general structure–property relationships that could guide a rational design are still largely absent. Here, we provide an overview of a series of recent computational studies from our group on different types of spacers. We first develop a simplified universal monovalent cation model to map out approximate structural stability maps as a function of the van der Waals radius and the magnitude of dispersion interactions to monitor the possible emergence of 2D phases. We further provide structural and photophysical insights from classical and first-principles molecular dynamics simulations and density functional theory calculations on 2D hybrid perovskites based on a wide range of spacers with different chemical nature and varying conformational properties. Our computational predictions are validated through comparison with powder diffraction, conductivity and optical measurements. Such comparative study allows for providing some general structure–property correlations, which can serve as design guidelines in the search for optimal 2D and mixed 2D/3D perovskite photovoltaic materials.