High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Piptigrine, a new insecticidal amide from Piper nigrum Linn

A new insecticidal amide piptigrine (1) possessing highly extended conjugation was isolated from the dried ground seeds of Piper nigrum Linn. along with the known amides piperine and wisanine (hitherto unreported from this plant). The structure of 1 has been elucidated as 1-[9-(3',4'-methylenedioxyphenyl)-4E,6E,8E-nonatrienoyl]piperidine through extensive 1D- and 2D-NMR (COSY-45, NOESY, J-resolved, HMQC, HMBC and NOESY studies. The known compounds have been identified through comparison of their spectral data with those reported in literature. 1 exhibited toxicity of 15.0 ppm against fourth instar larvae of Aedes aegypti Liston.     

Additive manufacturing for energy storage: Methods,designs and material selection for customizable 3D printed batteries and supercapacitors

Additive manufacturing and 3D printing in particular have the potential to revolutionize existing fabrication processes, where objects with complex structures and shapes can be built with multifunctional material systems. For electrochemical energy storage devices such as batteries and supercapacitors, 3D printing methods allows alternative form factors to be conceived based on the end use application need in mind at the design stage. Additively manufactured energy storage devices require active materials and composites that are printable, and this is influenced by performance requirements and the basic electrochemistry. The interplay between electrochemical response, stability, material type, object complexity and end use application are key to realising 3D printing for electrochemical energy storage. Here, we summarise recent advances and highlight the important role of methods, designs and material selection for energy storage devices made by 3D printing, which is general to the majority of methods in use currently.     

Unsymmetrically substituted benzimidazolium based Silver(I)-N-heterocyclic carbene complexes: Synthesis,characterization and in vitro anticancer study against human breast cancer and colon cancer

The promising biomedical applications of silver complexes stimulated the researchers to test these compounds against cancer. The present research work was designed to achieve this goal. In this work, a series of 5-methyl benzimidazole based N-Heterocyclic carbene ligands and respective silver(I) complexes were synthesized and tested on cancer cell lines to assess their anticancer activity. Unsymmetrically substituted benzimidazole was found unique in its reactivity and generation of a single product during NHC ligand formation was only possible after two successive alkylations with same alkyl halide. The corresponding Ag(I)-NHC adducts were obtained by in situ deprotonation of the NHC ligands. Synthesized compounds were characterized by various physcio-chemical and spectroscopic methods. Single crystal X-ray diffraction study of complex 7 revealed its mononuclear structure. Preliminary in vitro anticancer study of azolium salts and respective Ag(I)-NHC complexes against human breast cancer (MDA-MB-231), colon cancer (HCT-116) and normal endothelial cells (EA.hy926) cells revealed that all the compounds are more cytotoxic to cancer cells than normal cells and the complexes are relatively more potent compared to the corresponding NHC ligands. It was found that increased chain length and presence of methyl substituent on benzimidazole ring enhance the biopotency of Ag(I)-NHC complexes. The synthesized compounds were further studied for pro-apoptotic mechanism of action via Rhodamine 123 test. The tested compounds were found to induce apoptosis via extrinsic mitochondrial pathway.     

Impact of Various Parameters Over the Stability of Water-in-Vegetable Oil Emulsion

Theory regarding emulsification, its coalescence and impact of emulsifier over its stability has been updated. For the verification of the proposed theory, water-in-oil emulsion was prepared by mixing water and soybean oil in the presence and absence of emulsifier, monoglyceride. The effect of different parameters like emulsification time, contents of water, and concentration of emulsifier has been investigated on the emulsification and coalescence process of the emulsion. It was noted that the emulsion quality was highest if the mixture was homogenized for about 15 minutes and the water contents were 40% v/v. The addition of monoglyceride up to 0.5% w/v gave the most stable emulsion having higher quality than other composition. The results obtained were compared with the proposed theory and found to have good compositions.      

Phytochemical studies on the seed extract of Piper nigrum Linn

The petroleum ether extract of dried ground seeds of Piper nigrum Linn. and some column fractions of this extract were subjected to GC and GC-MS analysis, resulting in the identification of fourteen compounds (1-14) by using NIST Mass spectral search program 1998 and the Kovat's retention indices. Ten of the compounds (1, 2, 4-12) are reported for the first time from this plant. All the fractions showed insecticidal activity against the fourth instar larvae of Aedes aegypti and against the fourth instar larvae of Anopheles stephensi Liston, determined by the WHO method.     

New insecticidal amides from petroleum ether extract of dried Piper nigrum L. whole fruits

The petroleum ether extract of dried ground whole fruits of Piper nigrum L. afforded 20 compounds (1-20) including two new insecticidal amides named as pipnoohine (1), and pipyahyine (2), seven reported for the first time from this plant (12, 13, 15-17, 19, 20), and eleven known compounds (3-11, 14, 18). The structure of 1 has been elucidated as (2E,4E,12Z)-N-(4-methylpentyl)octadeca-2,4,12-trienamide and that of 2 as (2E,4E,11E)-12-(benzo[1,3]dioxol-5-yl)-N-(3-methylbutyl)dodeca-2,4,11-trien-amide through extensive ID-, 2D-NMR spectral studies and chemical reactions. The known compounds have been identified through comparison of their spectral data with those reported in literature. 1 and 2 exhibited toxicity at 35.0 and 30.0 ppm respectively against fourth instar larvae of Aedes aegypti L. by WHO method.     

Isolation and structure determination of a benzofuran and a bis-nor-isoprenoid from Aspergillus niger grown on the water soluble fraction of Morinda citrifolia Linn. leaves

The leaves of Morinda citrifolia, Linn. afforded a new benzofuran and a bis-nor-isoprenoid, blumenol C, hitherto unreported from this source. The structures of these have been elucidated as 5-benzofuran carboxylic acid-6-formyl methyl ester (1) and 4-(3'(R)-hydroxybutyl)-3,5,5, trimethyl-cyclohex-2-en-1-one (2) respectively through spectroscopic studies. The NMR data (including 1D, 2D techniques) and stereochemistry at C-3' of Compound 2 is also being reported for the first time.     

Polylactic Acid Film Coated with Electrospun Gelatin/Chitosan Nanofibers Containing Betel Leaf Ethanolic Extract: Properties,Bioactivities, and Use for Shelf-Life Extension of Tilapia Slices

Gelatin/chitosan solutions incorporated with betel leaf ethanolic extract (BLEE) at varying concentrations were electrospun on polylactic acid (PLA) films. Nanofibers with different morphologies, as indicated by scanning electron microscopy (SEM), were formed after solutions of gelatin/chitosan with and without BLEE were electrospun on PLA films at a constant voltage (25 kV) and a feed rate of 0.4 mL/h. Beaded gelatin/chitosan nanofibers (GC/NF) were found, particularly when high concentrations of BLEE were encapsulated. PLA films coated with GC/NF, and with BLEE added, showed antioxidant and antibacterial activities, which were augmented by increasing BLEE concentrations. Lower water vapor permeability and enhanced mechanical properties were achieved for GC/NF-coated PLA film (p < 0.05). Microbial growth and lipid oxidation of Nile tilapia slices packaged in PLA film coated with GC/NF containing 2% BLEE were more retarded than those packaged in low-density polyethylene (LDPE) bags over refrigerated storage of 12 days. Based on microbial limits, the shelf-life was escalated to 9 days, while the control had a shelf-life of 3 days. Therefore, such a novel film/bag could be a promising active packaging for foods.