A microwave-assisted sequential extraction of water and dilute acid soluble arsenic species from marine plant and animal tissues

This paper describes the use of dilute nitric acid for the extraction and quantification of arsenic species. A number of extractants (e.g. water, 1.5 M orthophosphoric acid, methanol-water and dilute nitric acid) were tested for the extraction of arsenic from marine biological samples, such as plants that have proved difficult to quantitatively extract. Dilute 2% (v/v) nitric acid was found to give the highest recoveries of arsenic overall and was chosen for further optimisation. The optimal extraction conditions for arsenic were 2% (v/v) HNO₃, 6 min⁻¹, 90 °C. Arsenic species were found to be stable under the optimised conditions with the exception of the arsenoriboses which degraded to a product eluting at the same retention time as glycerol arsenoribose. Good agreement was found between the 2% (v/v) HNO₃ extraction and the methanol-water extraction for the certified reference material DORM-2 (AB 17.1 and 16.2 μg g⁻¹, respectively, and TETRA 0.27 and 0.25 μg g⁻¹, respectively), which were in close agreement with the certified concentrations of AB 16.4 ± 1.1 μg g⁻¹ and TETRA 0.248 ± 0.054 μg g⁻¹.To preserve the integrity of arsenic species, a sequential extraction technique was developed where the previously methanol-water extracted pellet was further extracted with 2% (v/v) HNO₃ under the optimised conditions. Increases in arsenic recoveries between 13% and 36% were found and speciation of this faction revealed that only inorganic and simple methylated species were extracted.     

Synthesis of periphery-functionalized dendritic molecules using polylithiated dendrimers as starting material

A general method for the functionalization of Si-Cl terminated carbosilane dendritic molecules via organolithium or organomagnesium reagents is described. Quantitative exchange of the bromine atoms of 4-bromophenyl-functionalized dendrimers affords polylithiated species that are valuable starting materials for further functionalization, e.g., into pyridyl alcohols. The latter were successfully applied as catalyst precursors in a ruthenium-mediated ring-closure metathesis reaction.     

Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

An evaluation of voltammetric titration procedures for the determination of trace metal complexation in natural waters by use of computers simulation

The impact of random analytical errors on the determination of metal complexation parameters of natural waters by metal titration procedures based on cathodic stripping (CSV) or anodic stripping (ASV) voltammetry is investigated by means of computer simulation. The results indicate that random analytical errors are of overriding importance in establishing the range of ligand concentrations and conditional stability constants that can be accurately determined by these techniques. Simulations incorporating realistic estimates of random analytical error show that only stability constants lying within a relatively narrow range, typically three orders of magnitude, can be determined accurately by the ASV procedure. The CSV procedure suffers from the same limitations, but is potentially more flexible in that the available detection window can be moved (but not widened) by adjustments to the method. Both techniques are capable of accurately determining ligand concentrations provided that the corresponding stability constant, K′, is greater than a threshold value which corresponds to the lower end of the available detection window for the stability constant. Realistically attainable improvements in analytical precision did not greatly improve the performance of either technique. Two graphical treatments for the evaluation of metal complexation parameters from titration data are compared: the Scatchard and Van den Berg/Ruzic plots. Simulations indicate that at least for the single-ligand model of complexation, the Van den Berg/Ruzic method is superior. The importance of the simulation results with respect to determining metal complexation parameters in natural waters is discussed. This study illustrates the value of computer simulation when complex, time-consuming analytical techniques are applied and the need for rigorous analysis of errors in producing data of environmental relevance.     

Release studies on niosomes containing fatty alcohols as bilayer stabilizers instead of cholesterol

Monomers of some amphiphiles organize into bilayers to form liposomes and niosomes. Such bilayers are unstable or leaky and hence cholesterol is a common ingredient included to stabilize them. Cholesterol stabilizes bilayers, prevents leakiness, and retards permeation of solutes enclosed in the aqueous core of these vesicles. Other than cholesterol a material with good bilayer-stabilizing properties is yet to be identified. We have substituted cholesterol with fatty alcohols in niosomes containing polyglyceryl-3-di-isostearate (PGDS) and polysorbate-80 (PS-80) to explore their membrane-stabilizing property via permeation studies. Niosomes of polyglyceryl-3-di-isostearate, fatty alcohol/cholesterol, and polysorbate were prepared by ether injection method. Aqueous solution of ketorolac tromethamine (KT) was entrapped in them. The effects of alkyl chain length of fatty alcohols (C(12), C(14), C(16), C(18), and C(16+18)), of acyl chain length of polyoxyethylene sorbitan monoester surfactants, and of the molar ratio of lipid mixture on the release rate of ketorolac from niosomes were assessed by employing modified dissolution-dialysis method. Niosomes with cholesterol or fatty alcohols have exhibited a common release pattern. Niosomes containing fatty alcohol showed a considerably slower release rate of KT than those containing cholesterol. Based on the release rate, fatty alcohols can be ranked as stearyl相似文献   

Oscillatory melting temperature of the vortex smectic phase in layered superconductors

We report on transport measurements of YBa 2Cu 3O (7-delta) single crystals with different oxygen contents in the geometry B, J ||ab (J perpendicularB). Our data show that the vortices become confined between the Cu-O planes below a well-defined temperature at which the effective size 2xi of the vortex core is approximately equal to the period of the Cu-O layers. This confinement strongly increases the vortex liquid freezing temperature. A new melting line is found separating a vortex liquid and a smectic phase, which shows an oscillatory field dependence reflecting differences between commensurate and incommensurate smectic states.     

Die Bestimmung von Sulfat und Chlorid

Ohne Zusammenfassung     

Local-global principle for congruence subgroups of Chevalley groups

Suslin’s local-global principle asserts that if a matrix over a polynomial ring vanishes modulo the independent variable and is locally elementary then it is elementary. In this article we prove Suslin’s local-global principle for principal congruence subgroups of Chevalley groups. This result is a common generalization of the result of Abe for the absolute case and Apte, Chattopadhyay and Rao for classical groups. For the absolute case the localglobal principle was recently obtained by Petrov and Stavrova in the more general settings of isotropic reductive groups.