On a class of new and practical performance indexes for approximation of fold bifurcations of nonlinear power flow equations

Efficient measurement of the performance index (the distance of a loading parameter from the voltage collapse point) is one of the key problems in power system operations and planning and such an index indicates the severity of a power system with regard to voltage collapse. There exist many interesting methods and ideas to compute this index. However, some successful methods are not yet mathematically justified while other mathematically sound methods are often proposed directly based on the bifurcation theory and they require the initial stationary state to be too close to the unknown turning point to make the underlying methods practical.This paper first gives a survey of several popular methods for estimating the fold bifurcation point including the continuation methods, bifurcation methods and the test function methods (Seydel's direct solution methods, the tangent vector methods and the reduced Jacobian method) and discuss their relative advantages and problems. Test functions are usually based on scaling of the determinant of the Jacobian matrix and it is generally not clear how to determine the behaviour of such functions. As the underlying nonlinear equations are of a particular type, this allows us to do a new analysis of the determinants of the Jacobian and its submatrices in this paper. Following the analysis, we demonstrate how to construct a class of test functions with a predictable analytical behaviour so that a suitable index can be produced. Finally, examples of two test functions from this class are proposed. For several standard IEEE test systems, promising numerical results have been achieved.     

高功率飞秒脉冲激光器的进展

概述了超短激光脉冲技术发展的历程。详尽的论述了啁啾脉冲放大技术的原理和一些关键技术 ,并对当今飞秒激光器研究发展的状况进行了综述。在分析其应用前景的基础上 ,进一步指出了这一技术领域未来的发展趋势。结果表明 ,脉冲激光放大系统以后的发展方向是 :更短脉冲 ;追求更高峰值功率 ;连续光谱调谐化 ;向小型化乃至全光纤化发展。     

金属表面生成氧化膜在电解质中的电位

测量金属表面生成氧化膜在电解质中的电位时,金属/氧化膜/电解质/参比电极构成了多电极体系,其中包括3个电池,由3个电池之间的关系、电池过程中所有的电化学反应、电荷传输步骤和化学反应步骤,导出电位的普遍适用的公式: E=E_a⁰+sum from s=1 to 3|η_t,s|-1/(ne)v₇ΔG₇, E=E_c⁰-sum from s=4 to 6|η_t,s|+1/(ne)v₈ΔG₈.当金属/氧化膜/电解质电池受到不同的步骤控制时,可以得到不同的简化公式.     

GeⅩⅪ-SeⅩⅩⅢ离子n=3,Δn=0跃迁谱线和振子强度的计算

用HFR方法对CaⅨ-KrⅩⅩⅤ离子3s2,3s3p,3s3d,3p2组态能级结构进行了理论计算.在已有实验研究的基础上,通过分析离子能级沿等电子序列的变化规律,运用最小二乘拟合方法预言计算了GeⅩⅪ-SeⅩⅩⅢ离子3s2,3s3p,3s3d,3p2组态14条精细结构能级值.在此基础上,进一步计算了GeⅩⅪ-SeⅩⅩⅢ离子3s2-3s3p,3s3p-3s3d和3s3p-3p2跃迁的23条谱线波长和相应的振子强度.计算结果与已有的实验值十分吻合,波长的最大不确定度为0.008 nm.     

Rb（5PJ）＋Rb（5PJ）→Rb（5JS）＋Rb（nl=5D，7S）碰撞能量合并

研究了Rb(5PJ)+Rb(5PJ)→Rb(nlJ')+Rb(5S)碰撞能量合并过程,利用单模半导体激光器分别共振激发Rb原子的5P1/2或5P3/2态,利用另一与泵浦激光束反向平行的单模激光束作为吸收线探测激发态原子密度及其空间分布,吸收线分别调至5P1/2→5D3/2和5P3/2→7S1/2跃迁.由激发态原子密度和谱线荧光比得到碰撞能量合并过程的截面,对5P3/2激发,碰撞转移得到5D5/2,5D3/2和7S1/2的截面分别是(1.32士0.59)×10-14,(1.18士0.53)×10-14和(3.21士1.44)×10-15cm2;对5P1/2激发,碰撞转移到5D5/2和5D3/2的截面分别是(6.57士2.96)×10-15和(5.90士2.66)×10-15cm2.与其他的实验结果进行了比较.     

优化灰导数白化值的无偏灰色GM(1,1)模型

通过优化灰导数白化值 ,建立了无偏的 GM(1,1)模型 ,给出了估计模型参数的方法 ,证明了无偏GM(1,1)模型具有白指数律重合性 ,提出了新的预测公式 .实例分析表明 ,新方法提高了模型的精度 ,扩大了模型的适用范围 .     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

低通量慢中子对Bi系超导体的辐照效应

本文研究低通量慢中子对Bi系超导体的辐照效应。实验结果表明:(1)Bi系超导体在适量慢中子辐照后,临界电流密度J_c和零电阻温度T_c0都有不同程度提高;(2)低通量慢中子和高通量快中子对Bi系超导体具有相似的辐照效应。 关键词：     

GPS/SINS组合导航系统在运载火箭中的应用

针对运载火箭特点,着重研究在发射惯性坐标系下,位置、速度组合模式的GPS/SINS组合导航算法,推导了该坐标系下的惯导一阶误差传播方程,建立了该坐标系下GPS/SINS组合导航系统的状态方程和观测方程,并进行了相关数学仿真验证。仿真结果表明,在该坐标系中,GPS/SINS组合导航算法能较准确地给出运载火箭的位置、速度和姿态信息,提高运载火箭制导精度。     

Numerical comparison of methods for solving second-order ordinary initial value problems

In this paper, we apply Adomian decomposition method (shortly, ADM) to develop a fast and accurate algorithm of a special second-order ordinary initial value problems. The ADM does not require discretization and consequently of massive computations. This paper is particularly concerned with the ADM and the results obtained are compared with previously known results using the Quintic C²-spline integration methods. The numerical results demonstrate that the ADM is relatively accurate and easily implemented.