Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Microwave promoted methylation of plant polysaccharides

O-Methylation is of outstanding importance in structural polysaccharide chemistry. A novel method for the methylation of polysaccharides using microwave (MW) irradiation is described. Seed gum from Cyamopsis tetragonolobus (Guar) was fully methylated with dimethyl sulphate and sodium hydroxide using 100% microwave power for 4 min in 68% yield. The completely methylated seed gum thus obtained was hydrolyzed by 70% formic acid followed by 0.5N H₂SO₄ under full microwave power for 1.16 and 1.66 min, respectively. The partially methylated monosaccharides were separated and identified.     

Lanthanum(III) and prasedymium(III) complexes with piperazine dithiosemicarbazones

Lanthanum(III) and praseodymium(III) complexes of the type [Ln(L)Cl(H₂O)]₂ (Ln = La(III) or Pr(III); LH₂ = dithiosemicarbazone ligands derived from piperazine dithiosemicarbazide and benzaldehyde, 4-nitrobenzaldehyde, and 2-methoxybenzaldehyde) have been synthesized in methanol in the presence of sodium hydroxide. The complexes have been characterized by elemental analyses, molecular weight, molar conductance, electronic absorption, IR, and ¹H and ¹³C NMR spectral studies. Nephelauxetic ratio, covalency parameter, and bonding parameter for these complexes have also been calculated. Thermal studies of the complexes have been carried out using TG, DTG, and DSC techniques. Kinetic parameters, such as apparent activation energy and order of reaction, were determined by the Coats-Redfern graphical method. The heats of reaction for different reaction steps were calculated from DSC curves. The article was submitted by the authors in English.     

Rescaled mean spherical approximation structure factor for an aqueous suspension of polystyrene spheres

Rescaled mean spherical approximation (RMSA) has been used to calculate the structure factor for the aqueous suspension of polystyrene macroions with the interaction potential taken according to Derjaguin and Landau (1941) and Verwey and Overbeek (1948) (DLVO) model. The effects of charge over the macroion and size on the surface potential and therefore, the structure factor have been studied. The breakdown of the DLVO potential with an excess charge over the macroion (⩾800e) has been reported. The oscillation in the first peak height of structure factor versus wave vector curve with size has been correlated with the Debye length.     

pH-metric studies on some ternary complexes of lanthanones

Stepwise mixed ligand complex formation has been cited for the formation of 111,Ln(III)—NTA—catechol ternary complexes potentiometrically [whereLn(III)=La(III), Pr(III) or Nd(III)]. The results of titration curves indicate the formation of 11,Ln(III)—NTA complexes in beginning and the addition of catechol, takes place later on in the higher buffer region. The relative stability of these ternary complexes in terms of metal ion has been reported as La(III)< 相似文献   

Dynamic light-scattering analysis of the electrostatic interaction of hexahistidine-tagged cytochrome P450 enzyme with semiconductor quantum dots.

Currently, there is great interest in the development of methods suitable for determining the stoichiometry of biomolecules attached to nanoparticles. We describe the use of the dynamic light-scattering technique (DLS) to determine the stoichiometry of the protein cytochrome P450(BSbeta) attached to CdS and CdSe quantum dots (QDs). The enzyme-conjugated QDs have different diffusion characteristics compared to the QD and enzyme precursors, expressed in their size, scattering intensity as well as zeta-potential values. The significant enhancement of the scattering intensity of QDs observed upon conjugation with the P450(BSbeta) due to the refractive-index increment and the systematic variation in zeta potential resulting from charge neutralization of the anionic QDs by the cationic histidine-tagged P450(BSbeta) have been used for stoichiometry determination.     

o-hydroxylmethylphenylchalcogens: synthesis, intramolecular nonbonded chalcogen...OH interactions, and glutathione peroxidase-like activity

[Structure: see text]. The synthesis and characterization of a series of organochalcogen (Se, Te) compounds derived from benzyl alcohol 13 are described. The synthesis of the key precursor dichalcogenides 15, 22, and 29 was achieved by the ortho-lithiation route. Selenide 18 was obtained by the reaction of the dilithiated derivative 14 with Se(dtc)2. Oxidation of 15 and 22 with H2O2 afforded the corresponding cyclic ester derivatives 17 and 24, respectively. Oxidation of selenide 18 with H2O2 affords the spirocyclic compound 19. The presence of intramolecular interactions in dichalcogenides 15 and 22 has been proven by single-crystal X-ray studies. The cyclic compounds 17 and 19 have also been characterized by single-crystal X-ray studies. GP(X)-like antioxidant activity of selenium compounds has been evaluated by the coupled bioassay method. Density functional theory calculations at the mPW1PW91 level on ditelluride 22 have identified a fairly strong nonbonding interaction between the hydroxy oxygen and tellurium atom. The second-order perturbation energy obtained through NBO analysis conveys the involvement of n(O) --> sigma(Te-Te) orbital overlap in nonbonding interaction. Post wave function analysis with the Atoms in Molecules (AIM) method identified distinct bond critical point in 15 and 22 and also indicated that the nonbonding interaction is predominantly covalent. Comparison between diselenide 15 and ditelluride 22 using the extent of orbital interaction as well as the value of electron density at the bond critical points unequivocally established that a ditelluride could be a better acceptor in nonbonding interaction, when the hydroxy group acts as the donor.     

Nicotinamidoxime as an analytical reagent

Summary Uranium (VI) has been found to give a yellow colour with nicotinamidoxime in alkaline medium which is highly satisfactory for the spectrophotometric estimation of the metal. The optimumph for development of the colour is 10.9–11.5 in presence of a large excess of the reagent, at 10–40C. The colour intensity is measured at 400 m. Sensitivity is 0.045 g uranium per cm², with a visual identification limit of 5 g uranium per ml. Beer's law is obeyed in the range of 5–40 ppm of the metal with an optimum range of 8–40 ppm. The colour is stable for at least one hour. All the common anions are without effect, excepting however, phosphate, carbonate, and cyanide which are tolerated only in traces. Use of tartrate or EDTA helps to mask effectively all the interfering cations excepting copper, iron and vanadium.