A lead(II) ion selective electrode via a metal complex of poly(hydroxamic acid)

A new lead(II) electrode has been constructed with poly(hydroxamic acid) (PHXA) as the active material and silicone rubber as the supporting material. The electrode gave near Nerstian response over the concentration range 4 × 10⁻⁵−1 × 10⁻²M lead(II). The detection limit of the electrode is approximately 4 × 10⁻⁶M and the electrode works well in the pH range 4.5–6.0. The response time was 50–120 sec over the whole concentration range and the electrode has a working life of at least 4 weeks. Iron(III) severely poisoned the electrode membrane. Nickel(II) and mercury(II) gave very strong interference compared to copper(II), silver(I), cobalt(II), sodium(I), potassium(I), zinc(II) and cadmium(II) which gave some or little interference. Values determined with atomic absorption (AAS) and a commercial lead(II) electrode were in good agreement with those measured with the lead(II) electrode reported here.     

Modeling a clinical incineration process using fuzzy autocatalytic set

In this paper we have investigated and explored the realm of fuzzy graph in its relation to autocatalytic sets. A new concept namely fuzzy autocatalytic set have been defined. This relation has produced some results in the forms of theorems which have been proven. A clinical waste incineration process has been modeled using this new concept indicates to be more accurate than using crisp graph.     

A 119Sn Mössbauer Spectroscopic Investigation of Tin Complexes with Amidines

Several novel tin(IV) adducts of amidines, [SnClPh₃L], [SnCl₂Ph₂L] and [SnBr₄L] {L=N,N-diphenylacetamidine (Hdpac) or N,N-diphenylbenzamidine (Hdpba)}, were prepared and investigated by Mössbauer spectroscopy which was an important tool for the elucidation of bonding and structural features. The resulting Mössbauer data also led to the conclusion that the tin(IV) centre for the adduct [SnClPh₃L] is pentacoordinated in a trigonal bipyramidal arrangement and hexacoordinated for [SnCl₂Ph₂L] and [SnBr₄L] in a geometric patterns of an octahedral. The amidines act as monodentate ligands to the metal centre for the former and bidentate for the latter.     

MHD mixed convection flow near the stagnation-point on a vertical permeable surface

The steady magnetohydrodynamic (MHD) mixed convection boundary layer flow of a viscous and electrically conducting fluid near the stagnation-point on a vertical permeable surface is investigated in this study. The velocity of the external flow and the temperature of the plate surface are assumed to vary linearly with the distance from the stagnation-point. The governing partial differential equations are first transformed into ordinary differential equations, before being solved numerically by a finite-difference method. The features of the flow and heat transfer characteristics for different values of the governing parameters are analyzed and discussed. Both assisting and opposing flows are considered. It is found that dual solutions exist for both cases, and the range of the mixed convection parameter for which the solution exists increases with suction.     

Similarity solutions for flow and heat transfer over a permeable surface with convective boundary condition

The steady laminar boundary layer flow over a permeable flat plate in a uniform free stream, with the bottom surface of the plate is heated by convection from a hot fluid is considered. Similarity solutions for the flow and thermal fields are possible if the mass transpiration rate at the surface and the convective heat transfer from the hot fluid on the lower surface of the plate vary like x^−1/2, where x is the distance from the leading edge of the solid surface. The governing partial differential equations are first transformed into ordinary differential equations, before being solved numerically. The effects of the governing parameters on the flow and thermal fields are thoroughly examined and discussed.     

Krafft Temperature of 1-Alkyl-4-Aza-1-Azoniabicyclo[2.2.2]octane Bromide Complexes with Transition Metal Salts

Russian Journal of Physical Chemistry A - The Krafft temperature (ТKr) of 1-alkyl-4-aza-1-azoniabicyclo[2.2.2]octane bromides (Alk = n-C n H2n + 1, n = 14, 16, 18) (D-n) and complexes of them...     

Studies on structural and electrical properties of Mg<Subscript>0. 5+y</Subscript> (Zr<Subscript>2-y</Subscript>Fe<Subscript>y</Subscript>) <Subscript>2</Subscript> (PO<Subscript>4</Subscript>) <Subscript>3</Subscript> ceramic electrolytes

The sample of Mg_{0. 5+y} (Zr_1-y Fe_y) ₂ (PO₄) ₃ (0.0 ≤y ≤0.5) was synthesized using the sol-gel method. The structures of the samples were investigated using X-ray diffraction and Fourier transform infrared spectroscopy measurement. XRD studies showed that samples had a monoclinic structure which was iso-structured with the parent compound, Mg_0.5Zr (PO₄) ₃. The complex impedance spectroscopy was carried out in the frequency range 1–6 MHz and temperature range 303 to 773 K to study the electrical properties of the electrolytes. The substitutions of Fe³⁺ with Zr⁴⁺ in the Mg_0.5Zr (PO₄) ₃ structure was introduced as an extrainterstitial Mg²⁺ ion in the modified structured. The compound of Mg_0.5+y (Zr_1-y Fe_y)₂(PO₄)₃ with y?=?0.4 gives a maximum conductivity value of 1.25?×?10^?5 S cm^?1 at room temperature and 7.18?×?10^?5 S cm^?1 at 773 K. Charge carrier concentration, mobile ion concentration, and ion hopping rate are calculated by fitting the conductance spectra to power law variation, σ _ac (ω)?=?σ _o ? +?Aω ^α . The charge carrier concentration and mobile ion concentration increases with increase of Fe³⁺ inclusion. This implies the increase in conductivity of the compounds was due to extra interstitial Mg²⁺ ions.     

MHD stagnation point flow towards a stretching sheet

The steady two-dimensional MHD stagnation point flow towards a stretching sheet with variable surface temperature is investigated. The governing system of partial differential equations are transformed into ordinary differential equations, which are then solved numerically using a finite-difference scheme known as the Keller-box method. The effects of the governing parameters on the flow field and heat transfer characteristics are obtained and discussed. It is found that the heat transfer rate at the surface increases with the magnetic parameter when the free stream velocity exceeds the stretching velocity, i.e. ε>1, and the opposite is observed when ε<1.     

Radiation Effects on the Flow and Heat Transfer over a Moving Plate in a Parallel Stream

Effects of thermal radiation on the steady laminar boundary layer flow over a moving plate in a moving fluid is investigated. Under certain conditions, the present problem reduces to the classical Blasius and Sakiadis problems. It is found that dual solutions exist when the plate and the fluid move in the opposite directions. Moreover, the existence of thermal radiation is to reduce the heat transfer rate at the surface.