Dissociative recombination of the weakly bound NO-dimer cation: cross sections and three-body dynamics

Dissociative recombination (DR) of the dimer ion (NO)(2) (+) has been studied at the heavy-ion storage ring CRYRING at the Manne Siegbahn Laboratory, Stockholm. The experiments were aimed at determining details on the strongly enhanced thermal rate coefficient for the dimer, interpreting the dissociation dynamics of the dimer ion, and studying the degree of similarity to the behavior in the monomer. The DR rate reveals that the very large efficiency of the dimer rate with respect to the monomer is limited to electron energies below 0.2 eV. The fragmentation products reveal that the breakup into the three-body channel NO+O+N dominates with a probability of 0.69+/-0.02. The second most important channel yields NO+NO fragments with a probability of 0.23+/-0.03. Furthermore, the dominant three-body breakup yields electronic and vibrational ground-state products, NO(upsilon=0)+N((4)S)+O((3)P), in about 45% of the cases. The internal product-state distribution of the NO fragment shows a similarity with the product-state distribution as predicted by the Franck-Condon overlap between a NO moiety of the dimer ion and a free NO. The dissociation dynamics seem to be independent of the NO internal energy. Finally, the dissociation dynamics reveal a correlation between the kinetic energy of the NO fragment and the degree of conservation of linear momentum between the O and N product atoms. The observations support a mechanism in which the recoil takes place along one of the NO bonds in the dimer.     

ESI outcompetes other ion sources in LC/MS trace analysis

Choosing an appropriate ion source is a crucial step in liquid chromatography mass spectrometry (LC/MS) method development. In this paper, we compare four ion sources for LC/MS analysis of 40 pesticides in tomato and garlic matrices. We compare electrospray ionisation (ESI) source, thermally focused/heated electrospray (HESI), atmospheric pressure photoionisation (APPI) source with and without dopant, and multimode source in ESI mode, atmospheric pressure chemical ionisation (APCI) mode, and combined mode using both ESI and APCI, i.e. altogether seven different ionisation modes. The lowest limits of detection (LoDs) were obtained by ESI and HESI. Widest linear ranges were observed with the conventional ESI source without heated nebuliser gas. In comparison to HESI, ESI source was significantly less affected by matrix effect. APPI ranked second (after ESI) by not being influenced by matrix effect; therefore, it would be a good alternative to ESI if low LoDs are not required.

Graphical abstract

     

Reduction and methyl transfer kinetics of the alpha subunit from acetyl coenzyme a synthase

Stopped-flow was used to evaluate the methylation and reduction kinetics of the isolated alpha subunit of acetyl-Coenzyme A synthase from Moorella thermoacetica. This catalytically active subunit contains a novel Ni-X-Fe4S4 cluster and a putative unidentified n = 2 redox site called D. The D-site must be reduced for a methyl group to transfer from a corrinoid-iron-sulfur protein, a key step in the catalytic synthesis of acetyl-CoA. The Fe4S4 component of this cluster is also redox active, raising the possibility that it is the D-site or a portion thereof. Results presented demonstrate that the D-site reduces far faster than the Fe4S4 component, effectively eliminating this possibility. Rather, this component may alter catalytically important properties of the Ni center. The D-site is reduced through a pathway that probably does not involve the Fe4S4 component of this active-site cluster.     

GROMACS: fast, flexible, and free

This article describes the software suite GROMACS (Groningen MAchine for Chemical Simulation) that was developed at the University of Groningen, The Netherlands, in the early 1990s. The software, written in ANSI C, originates from a parallel hardware project, and is well suited for parallelization on processor clusters. By careful optimization of neighbor searching and of inner loop performance, GROMACS is a very fast program for molecular dynamics simulation. It does not have a force field of its own, but is compatible with GROMOS, OPLS, AMBER, and ENCAD force fields. In addition, it can handle polarizable shell models and flexible constraints. The program is versatile, as force routines can be added by the user, tabulated functions can be specified, and analyses can be easily customized. Nonequilibrium dynamics and free energy determinations are incorporated. Interfaces with popular quantum-chemical packages (MOPAC, GAMES-UK, GAUSSIAN) are provided to perform mixed MM/QM simulations. The package includes about 100 utility and analysis programs. GROMACS is in the public domain and distributed (with source code and documentation) under the GNU General Public License. It is maintained by a group of developers from the Universities of Groningen, Uppsala, and Stockholm, and the Max Planck Institute for Polymer Research in Mainz. Its Web site is http://www.gromacs.org.     

Synthesis of an Acyloxymethyl Prodrug of the Inositol Phosphate α-Trinositol

ABSTRACT

Acyloxymethylation of an acylated silver salt of α-trinositol gives, after deprotection, membrane permeable 1D-myo-inositol 1,2,6-tris(ethoxycarbonyloxymethyl sodium phosphate). The acyl groups, 3-(4,5-methylenedioxy-2-nitrophenyl)propanoyl, are cleaved by hydrogenolysis.     

Effect of sodium sulfide on Ni-containing carbon monoxide dehydrogenases

The structure of the active-site C-cluster in CO dehydrogenase from Carboxydothermus hydrogenoformans includes a mu(2)-sulfide ion bridged to the Ni and unique Fe, whereas the same cluster in enzymes from Rhodospirillum rubrum (CODH(Rr)) and Moorella thermoacetica (CODH(Mt)) lack this ion. This difference was investigated by exploring the effects of sodium sulfide on activity and spectral properties. Sulfide partially inhibited the CO oxidation activity of CODH(Rr) and generated a lag prior to steady-state. CODH(Mt) was inhibited similarly but without a lag. Adding sulfide to CODH(Mt) in the C(red1) state caused the g(av) = 1.82 EPR signal to decline and new features to appear, including one with g = 1.95, 1.85 and (1.70 or 1.62). Removing sulfide caused the g(av) = 1.82 signal to reappear and activity to recover. Sulfide did not affect the g(av) = 1.86 signal from the C(red2) state. A model was developed in which sulfide binds reversibly to C(red1), inhibiting catalysis. Reducing this adduct causes sulfide to dissociate, C(red2) to develop, and activity to recover. Using this model, apparent K(I) values are 40 +/- 10 nM for CODH(Rr) and 60 +/- 30 microM for CODH(Mt). Effects of sulfide are analogous to those of other anions, including the substrate hydroxyl group, suggesting that these ions also bridge the Ni and unique Fe. This proposed arrangement raises the possibility that CO binding labilizes the bridging hydroxyl and increases its nucleophilic tendency toward attacking Ni-bound carbonyl.     

Optimization of electrospray interface and quadrupole ion trap mass spectrometer parameters in pesticide liquid chromatography/electrospray ionization mass spectrometry analysis

Optimization of both the ionization process and ion transportation in the mass spectrometer is of crucial importance in order to achieve high sensitivity and low detection limits and acceptable accuracy in liquid chromatography/electrospray ionization mass spectrometry (LC/ESI‐MS) analysis. In this paper four optimization procedures of electrospray interface and quadrupole ion‐trap mass spectrometer parameters (ESI‐MS) (nebulizer gas and drying gas flow rate, end plate voltage, capillary voltage, skimmer voltage, octopoles direct current and radio frequency, trap drive and lens voltages) were studied on three pesticides – thiabendazole, aldicarb and imazalil. The results demonstrate that the methodology of optimization strongly influences the effectiveness of finding true optima of the operating parameters. Both eluent flow rate and composition during optimization have to mimic the situation during real analysis as closely as possible in order to achieve parameters giving the highest sensitivity. Therefore, post‐column addition of analyte to the mobile phase identical in composition to the one in which analyte elutes during real analysis combined with software‐based optimization was found to be the most effective and fastest method for achieving intensity maxima. The parameters most strongly affecting ion formation and transportation, hence sensitivity, were capillary voltage, direct current of the first octopole, trap drive and the second lens for all pesticides under study. In addition to sensitivity and detection limit matrix effect was considered in the optimization process. It was found that the matrix effect can be reduced but not eliminated by adjusting the ESI and MS parameters. The optimal parameters from the point of view of the matrix effect can only be found with factorial design. Parameters giving higher sensitivity tended to be more affected by matrix effect causing higher ionization suppression by co‐eluting compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Ein Zusatzgerät zum vermeiden des Übersaugens bei dem Mikro-Kjeldahlapparat von Parnas-Wagner

Zusammenfassung Es wird ein Zusatzgerät zu dem bekannten Mikro-Kjeldahlapparat vonJ. K. Parnas undR. Wagner beschrieben. Mit Hilfe dieses Gerätes, das einen Druckausgleich während der Wasserdampfdestillation ermöglicht, läßt sich das schädliche Zurücksteigen der Probeflüssigkeitwährend des Destillierens vermeiden.

---

Summary (H) An addition to the well-known micro Kjeldahl apparatus ofJ. K. Parnas andR. Wagner is described. By the use of this device, which effects an equalisation of pressure during the steam distillation, the objectionable sucking back of the test liquid during the distillation is entirely prevented.

---

Résumé (W) L'auteur décrit une pièce complémentaire à l'appareil micro-Kjeldahl bien connu deJ. K. Parnas etR. Wagner. A l'aide de ce dispositif, qui rend possible, pendant la distillation à la vapeur d'eau, l'égalisation de pression, on évite le retour préjudiciable de la prise d'essai pendant la distillation.

     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.