Effects of annealing on crystallinity and phase behaviour of PET/PC block copolymers

The effects of the annealing on the properties of PET/PC block copolymers, obtained by reactive blending in the presence of different catalysts and for different mixing times, have been studied. The annealing, performed in conditions that promote the crystallization, has been used to better understand the role of block length in determining the phase behaviour. The copolymers characterized by blocks with molecular weight larger than 8000 are able to reorganize towards more ordered domains. This rearrangement maintains the phase separation, as two crystalline phases are present before and after annealing, due to the immiscibility of long blocks. In copolymers characterized by blocks with molecular weight equal to about 2500, that is the higher limit for the miscibility in the amorphous state in PET/PC block copolymers studied in this work, the rearrangement of the chains during annealing causes a phase separation leading to two crystalline phases. Only in the copolymers with molecular weight of blocks lower than 1500, the very short block length hinders the crystallization: therefore, only in this case a phase separation does not take place after annealing.     

Dynamic-mechanical properties and melting points of some aliphatic and partially aromatic polyamides

Some aliphatic and partially aromatic polyamides have been prepared from hexamethylene diamine and the following dicarboxylic acids: deca-, octa-, hexa-methylenedicarboxylic, p-carboxymethylphenoxyacetic, p-carboxyethylphenoxyacetic, p-phenylenedipropionic, p-phenylenediacetic, p-carboxymethoxyphenoxyacetic, β(p-carboxymethyl)phenylpropionic.The dynamic-mechanical properties at 110 Hz have been measured between ?140° and about 200. Three relaxation processes α β and γ have been found: only the main transition α appreciably depends on chemical structure.The influences of the length of repeating unit and of in-chain substitution on melting points, crystallinity and the dynamic-mechanical α transition have been investigated. The results have been discussed in terms of chain flexibility, chain packing and intermolecular forces.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.     

Chemoenzymatic synthesis of both enantiomers of 3-hydroxy- and 3-amino-3-phenylpropanoic acid

Ethyl (S)-3-hydroxy-3-phenylpropionate (S)-2 was obtained by the asymmetric reduction of ethyl 3-phenyl-3-oxopropionate 1 with the yeast Saccharomyces cerevisiae (ATCC 9080). The kinetic resolution of racemic ethyl 2-acetoxy-3-phenyl-propionate rac-3 with the same microorganism, gave after hydrolysis ethyl (R)- and (S)-3-hydroxy-3-phenylpropionates (R)-2 and (S)-2 which were converted by a straightforward series of reactions to the enantiomers of 3-amino-3-phenyl-propionic acids (S)-6 and (R)-6. The asymmetric reduction and hydrolytic kinetic resolution were also tested with several other whole cell systems under a variety of conditions.     

A support for the identification of non-tryptic peptides based on low resolution tandem and sequential mass spectrometry data: The INSPIRE software

A simple software, to be used as an aid in the identification of non-tryptic peptides based on low resolution (3D-ion trap) tandem (MS/MS) and sequential (MS³) mass spectrometry data, is presented.     

Optofluidic droplet router

This contribution presents an optofluidic droplet router which is able to route and steer microdroplets using optically induced forces created solely by the bulk photovoltaic effect on a nonlinear substrate. The combination of microfluidic tools with the properties of a photorefractive crystal allows for the generation of dielectrophoretic forces that can be either repulsive, leading to virtual barriers, or attractive, creating virtual rails. The sign of these forces is solely determined by the electrical properties of the liquid medium under investigation. Moreover, the induced structures on the bottom of the microfluidic channel are optically reconfigurable, so that the same device can easily be adopted for different purposes. Appropriate droplet‐generating devices are fabricated by UV illumination of SU‐8 and polydimethylsiloxane replica molding of the master structures. The bottom of the channels is formed by an iron‐doped lithium niobate crystal, whose internal electric fields are induced by structured illumination patterns and exert dielectrophoretic forces on droplets in the microfluidic section.

     

Flexural,impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil

The paraffin oil dispersion technique innovated in the recent years to synthesize bulk polymer nanocomposite materials has a uniform dispersion. This research work aims to study the effect of added carbon nanotubes (CNTs) on flexural, impact and rheology behaviors of polyoxymethylene (POM) reinforced by 0–0.03 wt% of CNT using paraffin oil dispersion technique. The wettability and lamellar thickness were measured and rheological performance investigated using a parallel plate rheometer. The flexural and impact mechanical properties were also evaluated. The fracture surfaces were then examined by microscopy. The results showed that the energy to break, flexural strength and modulus increased proportionally with the addition of the amount of CNT in the matrix. For the rheology behavior, the viscosity decreased at the low percentage of CNT and then increased with increase in the percentage weight ratio of CNT in the POM matrix. It was also noted that the water contact angle rose with the increase the CNT percentages. Copyright © 2016 John Wiley & Sons, Ltd.