Preparation of superhydrophobic composite paper mulching film

To study the influence of different concentrations of zinc oxide (ZnO)/silicon dioxide (SiO₂) composite coating on hydrophobic property and mechanical stability of paper mulch film, three kinds of ZnO/SiO₂ composite coating paper mulch films (2%, 4%, 6%) with different coating substance contents were prepared by brush coating method. Through particle size analysis, contact angle, rolling angle and mechanical stability test, combined with scanning electron microscope, three-dimensional morphology and roughness measuring instrument, the optimal concentration of ZnO/SiO₂ composite coated paper mulch film was screened out. Through acid-base salt corrosion test, silver mirror reaction and surface self-cleaning, the optimal concentration of composite coated paper mulch film was compared with the original paper mulch film to prove its excellent chemical stability and hydrophobicity. The results show that the paper mulch film with 4% coating material has excellent hydrophobicity and mechanical stability, can effectively reduce the surface roughness of paper mulch film, and has remarkable effects in resisting acid, alkali and salt and self-cleaning.     

Analysis of the acid and alkali resistance of superhydrophobic paper mulch

Agricultural paper mulch is an indispensable part of modern agriculture. It had the functions of heat preservation, moisture preservation, insect resistance, disease prevention, and weed growth inhibition. In order to extend the service life of the paper mulch, we use the solution immersion method to modify the surface of the paper mulch. A super-hydrophobic paper mulch is mainly prepared by using hydrophobic silica. The static contact angle of the super-hydrophobic paper mulch with water is 160.6°. The super-hydrophobic paper mulch samples were immersed in acid solution (pH?=?4.6 H₂SO₄) and alkaline solution (pH?=?8.5 NaOH). The main instruments are contact angle tester, tensile testing machine and high-speed camera. The hydrophobic properties, mechanical properties and rebound properties of the two kinds of paper mulches were compared. The results showed that the tensile strength and droplet bounce height of the superhydrophobic paper mulch decreased after being soaked in acid or alkaline solution for 48 h. The mass loss rate of paper mulch was more significant in acid solution, but its contact angle was still greater than 145°, and it had good bounce performance. After observing the microscopic morphology of its surface, it was found that silica had a micro-rough structure on the surface of the paper mulch. The method was simple and environmentally friendly, and can alleviate the problem of poor acid and alkali corrosion resistance of the paper mulch, and had extraordinary significance for environmental protection.

     

SiH3+O(3P)反应机理的理论研究

利用abinitio方法对SiH3+O(3P)反应进行了理论研究,在MP2/6-311+G(d,p)水平上优化得到了反应途径上的反应物、中间体、过渡态和产物的几何构型,并在QCISD(T)/6-311+G(d,p)水平上进行单点能计算.计算结果表明,SiH3+O(3P)→IM1→TS3→IM2→TS8→HOSi+H2为主反应通道,其他可能存在的次要产物有HSiOH+H、H2SiO+H和HSiO+H2.HOSi、HSiO和HSiOH(cis)还可能进一步解离生成SiO.另外,计算结果对SiH4+O(3P)反应机理中存在的争议给出了可能的解释,认为Withnall等人在实验中观察到的产物HSiOH、H2SiO和SiO并不是SiH4+O(3P)反应的直接产物,而是来自副反应SiH3+O(3P).     

宽带钕玻璃激光的高效三次谐波转换

提出了一种新颖的宽频带钕玻璃激光三倍频技术组合激光工作模式（宽带激光与窄带激光混频）方案。数值模拟研究表明:利用窄线宽钕玻璃激光脉冲,可以缓解宽频带激光谐波转换过程中群速度失配对转换效率的影响,从而提高宽带钕玻璃激光的转换效率;并且该方案可以与目前使用成熟的双和频晶体方案结合,从而能支持目前钕玻璃激光装置能达到的最大带宽约5 nm的高效三倍频（理论上效率达约80%）。     

钇铝石榴石对撞增强型相位共轭腔的研究

报道了一种新型的相位共轭腔——对撞型钇铝石榴石受激布里渊散射相位共轭激光腔,实验结果发现该腔具有较低的启动阈值和100mJ以上的输出能量,它能输出稳定的20ns左右的自调Q脉冲,发散角为1．3mrad。在一定范围内,抽运电压越高,输出脉宽越窄;相位共轭腔越长,输出脉宽越宽;聚焦透镜对输出脉宽也有影响,焦距越短,脉宽越窄;焦距与介质池相对长点,输出能量相对高,远场发散角相对小些。实验给出了不同条件下的输出能量、脉冲宽度和光束发散角的情况。     

氮磷配位的钛酸酯络合物的X射线光电子能谱研究

制备了单烷基羧酸型和磺酸型钛酸酯氮配位与磷配位的配合物.用XPS法证明有N→Ti或P→Ti配位键生成,并从化学位移量推测了键的强度,磺酸型较羧酸型易配位,羟基取代胺的氮配体配位较容易发生;磷配位由于存在Ti→P的反馈作用,使化学位移不如氮配位明显.此外,异丙基钛酸酯与乙醇胺的反应物,证明分子内有N→Ti配位键生成.     

SiH3+O(3P)反应机理的理论研究

The reaction for SiH3+O(3P) was studied by ab initio method. The geometries of the reactants, intermediates, transition states and products were optimized at MP2/6-311+G(d,p) level. The single point calculations for all the stationary points were carried out at the QCISD(T) /6-311+G(d,p) level using the MP2/6-311+G(d,p) optimized geometries. The results of the theoretical study indicate that the major pathway is the SiH3+O(3P)→IM1→TS3→IM2→TS8→HOSi+H2. The other minor products include the HSiOH+H, H2SiO+H and HSiO+H2. Furthermore, the products HOSi, HSiO and HSiOH(cis) can undergo dissociation into the product SiO. In addition, the calculations provide a possible interpretation for disagreement about the mechanism of the reaction SiH4+O(3P). It suggests that the products HSiOH, H2SiO and SiO observed by Withnall and Andrews are produced from the secondary reaction SiH3+O(3P) and not from the reaction SiH4+O(3P).     

The investigation of compound YAG phase-conjugate resonator

How to improve the quality of output beam of phase-conjugation cavity is a problem. And there are a few reports on how to improve the quality of output beam mode [1]. On this paper, the output characteristic of compound phase-conjugate resonator was reported. The experiment results indicated that it has high output energy and excellent mode. The output energy is 7.4 mJ, and the width of it is about 15 ns. The results of pulse widths and output energies and beam profiles were given and it indicates that using the compound cavity is a useful and easy method to improve the quality of beam mode.     

YAG复合型相位共轭腔对改善光束模式的研究

如何降低受激布里渊散射(SBS)相位共轭腔的启动阈值以及如何提高输出光束的质量一直是人们关心的课题。报道了在YAG激光器上运行一种复合型受激布里渊散射相位共轭激光腔,该腔能够输出模式优良的光束。最大能够输出13．35mJ的单纵模,脉冲半高宽度约为15ns,输出光束的发散角为0．6mrad。实验给出了不同参量条件下的输出脉宽、能量及远场光斑分布和干涉环的情况,表明利用复合型相位共轭腔是改善光束模式的一种简单有效的方法。