Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

A family of vanadate esters of monoionized and diionized aromatic 1,2-diols: synthesis,structure, and redox activity

The concerned diols (general abbreviation, H(2)L) are catechol (H(2)L(1)) and its 3,5-Bu(t)(2) derivative (H(2)L(2)). Esters of the type VO(xsal)(HL), 2, are obtained by reacting H(2)L with VO(xsal)(H(2)O) or VO(xsal)(OMe)(HOMe), where xsal(2-) is the diionized salicylaldimine of glycine (x = g), L-alanine (x = a), or L-valine (x = v). The reaction of VO(acac)(2) with H(2)L and the salicylaldimine (Hpsal) of 2-picolylamine has furnished VO(psal)(L), 3. In the structures of VO(gsal)(HL(1)), 2a, and VO(vsal)(HL(2)), 2f, the HL(-) ligand is O,O-chelated, the phenolic oxygen lying trans to the oxo oxygen atom. The xsal(2-) coligand has a folded structure and the conformation of 2f is exclusively endo. In both 2a and 2f the phenolic oxygen atom is strongly hydrogen bonded (O...O, 2.60 A) to a carboxylic oxygen atom of a neighboring molecule. In VO(psal)(L(2)).H(2)O, 3b, the diionized diol is O,O-chelated to the metal and the water molecule is hydrogen bonded to a phenoxidic oxygen atom (O.O, 2.84 A). The C-O and C-C distances in the V(diol) fragment reveal that 2 is a pure catecholate and 3 is a catecholate-semiquinonate hybrid. In solution each ester gives rise to a single (51)V NMR signal (no diastereoisomers), which generally shifts downfield with a decrease in the ester LMCT band energy. The V(V)/V(IV) and catecholate-semiquinonate reduction potentials lie near -0.75 and 0.35, and 1.10 and 0.70 V vs SCE for 2 and 3, respectively. Molecular oxygen reacts smoothly with 2 quantitatively furnishing the corresponding o-quinone, and in the presence of H(2)L the reaction becomes catalytic. In contrast, type 3 esters are inert to oxygen. The initial binding of O(2) to 2 is proposed to occur via hydrogen bonding with chelated HL(-).     

Synthesis of azahelicenes through Mallory reaction of imine precursors: corannulene substrates provide an exception to the rule in oxidative photocyclizations of diarylethenes

Typically, the synthesis of phenanthrene-based polycyclic aromatic hydrocarbons relies on the Mallory reaction. In this approach, stilbene (PhCH CHPh)-based precursors undergo an oxidative photocyclization reaction to join the two adjacent aromatic rings into an extended aromatic structure. However, if one C C carbon atom is replaced by a nitrogen atom (C N), the synthesis becomes practically infeasible. Here, we show the very first examples of a successful Mallory reaction on stilbene-like imine precursors involving the molecularly curved corannulene nucleus. The isolated yields exceed 90% and the resulting single and double aza[4]helicenes exhibit adjustable high affinity for electrons.

First azahelicene synthesis from corannulene-based imine precursors is presented.     

Cation exchange column chromatography in aqueous ammonium acetate: Separation of U(VI), Al(III), Sr(II), Ba(II) and Hg(II) from other metal ions

Summary A rigorous analysis of the effect of various concentrations (0.02–1.60M) of ammonium acetate on the distribution coefficients (K) of a number of metal ions using cation exchanger Dowex 50W-X8 (100–200 mesh NH₄ ⁺-form) has been made. On account of the low affinity of U(VI) for resin in 0.20M NH₄OAc it can be separated from all other metal ions. HighK values of Sr(II), Ba(II) and Hg(II) at higher 0.50M NH₄OAc are responsible for their separation from others. The abnormal column Chromatographic behaviour of Al(III) permits its separation from other metal ions including U(VI), Sr(II), Ba(II), Hg(II). A number of binary and ternary separations have been achieved.     

Luminescence of Ce3+ in Y2SiO5 nanocrystals: Role of crystal structure and crystal size

Here, we report the role of crystal structure and crystal size on the photoluminescence properties of Ce3+ ions in Y2SiO5 nanocrystals. The emission at 430 nm (5d1 --> 4f1) and lifetime of the excited state of Ce3+ ion doped Y2SiO5 nanocrystals are found to be sensitive to the crystal structure, crystal size, and dopant concentration. It is found that the overall lifetime tau of 0.5 mol % Ce doped Y2SiO5 nanocrystals are 8.78 and 3.45 ns for 1000 and 1100 degrees C heat-treated samples with the same crystal structure (X1-Y2SiO5 phase), respectively. However, a significant increase in the overall lifetime (35.21 ns) is observed for the 1300 degrees C annealed 0.5 mol % Ce doped Y2SiO5 sample having a different crystal structure (X2-Y2SiO5 phase). We found that the decay kinetic is biexponential. It is explained that the fast component arises due to sequential hole-electron capture on the luminescent ions and the slow component arises from isolated ions. Our analysis suggests that modifications of radiative and nonraditive relaxation mechanisms are due to local symmetry structure of the host lattice and crystal size, respectively.     

Liquid chromatographic separation of derivatives of diospyrin, a bioactive bisnaphthoquinonoid plant-product, and analogous naphthyl compounds

Isocratic reversed-phase liquid chromatography (LC) method was developed using acetonitrile and water for the determination of diospyrin, a pharmacologically important bisnaphthoquinonoid plant-product. The method was validated for precision, accuracy and reproducibility, and was found to be linear over the concentration range of 1-1000 microg/ml; the limits of detection and quantitation were 8 and 20 ng, respectively. The technique was used to determine the amount of diospyrin in plant extracts from four climatic regions in India. It was also applied for differentiation and separation of 27 naphthyl compounds. While a composition of 50:50 was preferable for dimeric compounds, the composition 40:60 was a better choice for the monomers. Also, the isomeric alpha- and beta-naphthols and their dimers could be distinguished by conversion into the respective methyl ethers.     

Total synthesis of (+/-)-stemodinone via an efficient ring-exchange strategy

A total synthesis of (+/-)-stemodinone, a tetracyclic stemodane diterpene, from the known tricyclic methyl olefin 11 is described. The key steps involve an efficient ring-exchange reaction and palladium(0)-catalyzed lactone migration. The ring-exchange strategy for controlling the stereochemistry was based on an initial Diels-Alder reaction to form a new ring followed by cleavage of the original ring. Cleavage of the original ring of the Diels-Alder adduct 9 was achieved by an initial regio- and chemoselective Baeyer-Villiger oxidation followed by the Pd(0)-catalyzed lactone-migration reaction reported by us.     

Small-angle X-ray study of air-dried elastoidin using three- and one- dimensional correlation functions obtained from slit-smeared intensity

In the present paper an isotropic sample of air-dried elastoidin has been studied considering it to be a non-ideal two-phase densely packed system after the theories by Vonk [1]. The relevant important physical parameters obtained for the sample areE, the width of the transition layer,D, the average periodicity transverse to the layers, S/V, the specific inner surface ₁ and ₂, the volume fraction of two phases, i. e. matter and void,l ₁ andl ₂ the transversal lengths,l _r, the range of inhomogeneity,l _c, the length of coherence and 2E/D, the volume fraction of the transition layer. The values ofE obtained by two approches as given by Vonk [1] and Ruland [2] show but a small difference indicating the correctness of the analysis.     

Effect of attractive interactions on the structure of polymer melts confined between surfaces: a density-functional approach

A density-functional theory is presented to study the structure of polymers, having attractive interactions, confined between attractive surfaces. The theory treats the ideal-gas free-energy functional exactly and uses weighted density approximation for the hard-chain contribution to the excess free-energy functional. The bulk interactions of freely jointed hard spheres are obtained from generalized Flory equation of state and the attractive interactions are calculated using the direct correlation function obtained from the polymer reference interaction site model theory along with the mean spherical approximation closure. The theoretical predictions are found to be in quite good agreement with the Monte Carlo simulation results for varying densities, chain lengths, and different interaction potentials. The results confirm important implications of using different approximations for the hard-sphere and attractive interactions.