Proton conduction in the binary system (1 − x)CsHSeO4–xKHSeO4 studied with a free-energy model

Electrical Impedance Spectroscopy (EIS) was used to study the electrical properties of the (1???x)CsHSeO₄–xKHSeO₄ binary system with concentrations x?=?0.0 and 0.1. The results show a higher proton-conduction phase above 80°C for both concentrations, however, while DC conductivity of CsHSeO₄ shows a gradual change to higher values in the 80–118°C temperature range, the 0.9CsHSeO₄–0.1KHSeO₄ concentration reveals an abrupt change at about 80°C to an intermediate temperature phase. The observed behavior for the doped sample was modeled using a trial free-energy density, based on the concentration of mobile ions, that takes into account the formation of defects, configurational and phonon entropies, and defect-defect interactions. By minimising the free-energy density one obtains two roots for the carrier concentration at a given temperature, which corresponds to a stable and metastable configuration. It is possible to characterise the phase behavior of the system by means of temperature and two model parameters, which depend on the crystalline properties of the system, but not on temperature. One can successfully explain the conductivity behavior of the system by changing the model parameters if it is assumed that its variations are due to the carriers density.     

Temporal evolution of radionuclides in sludge from wastewater treatment plants

22 sludge samples were analyzed from three municipal wastewater treatment plants to assess both the occurrence and the temporal behavior of radioactivity during 8 sampling campaigns carried out over the period 2007–2009. As regards natural gamma emitters radionuclides from the natural ²³⁸U series (such as ²³⁴Th, ²¹⁴Pb, ²¹⁴Bi, ²¹⁰Pb) and the ²³²Th series (such as ²²⁸Ac, ²¹²Pb, ²¹²Bi and ²⁰⁸Tl) and other natural gamma emitters such as ⁷Be, ²¹⁰Pb_u or ⁴⁰K were measured. In the case of man-made radionuclides small amounts of ¹³⁷Cs were found, while significant amounts of ¹³¹I were detected in some samples. Correlations were found between radionuclides with the same origin. No seasonal variation for the ²³⁸U and ²³²Th series was found in the studied period but ⁷Be and ²¹⁰Pb_u showed seasonal variation that was explained by the monthly rainfall. The internal and external hazard indices were calculated and the results indicate that the radiological characteristics of the sludge do not present a significant radiological risk and make them suitable for future applications.     

Design and synthesis of a new class of membrane-permeable triazaborolopyridinium fluorescent probes

A new class of fluorescent triazaborolopyridinium compounds was synthesized from hydrazones of 2-hydrazinylpyridine (HPY) and evaluated as potential dyes for live-cell imaging applications. The HPY dyes are small, their absorption/emission properties are tunable through variation of pyridyl or hydrazone substituents, and they offer favorable photophysical characteristics featuring large Stokes shifts and general insensitivity to solvent or pH. The stability, neutral charge, cell membrane permeability, and favorable relative influences on the water solubility of HPY conjugates are complementary to existing fluorescent dyes and offer advantages for the development of receptor-targeted small-molecule probes. This potential was assessed through the development of a new class of cysteine-derived HPY-conjugate imaging agents for the kinesin spindle protein (KSP) that is expressed in the cytoplasm during mitosis and is a promising chemotherapeutic target. Conjugates possessing the neutral HPY or charged Alexa Fluor dyes that function as potent, selective allosteric inhibitors of the KSP motor were compared using biochemical and cell-based phenotypic assays and live-cell imaging. These results demonstrate the effectiveness of the HPY dye moiety as a component of probes for an intracellular protein target and highlight the importance of dye structure in determining the pathway of cell entry and the overall performance of small-molecule conjugates as imaging agents.     

Characterization of galactooligosaccharides derived from lactulose

Galactooligosaccharides are non-digestible carbohydrates with potential ability to modulate selectively the intestinal microbiota. In this work, a detailed characterization of oligosaccharides obtained by transgalactosylation reactions of the prebiotic lactulose, by using β-galactosidases of different fungal origin (Aspergillus oryzae, Aspergillus aculeatus and Kluveromyces lactis), is reported. Oligosaccharides of degree of polymerization (DP) up to 6 were detected and quantified by HPLC-ESI MS from a complex mixture produced by transgalactosylation reaction with A. oryzae (GOSLuAo), whereas only carbohydrates up to DP4 and DP5 were found for those obtained from the reaction with β-galactosidases from K. lactis (GOSLuKl) and A. aculeatus (GOSLuAa), respectively. Disaccharides (galactosyl-galactoses and galactosyl-fructoses) and trisaccharides were characterised in the three mixtures by GC-MS as their trimethylsilyl oximes. Galactosyl- and digalactosyl-glycerols were produced during the transgalactosylation reaction of lactulose with β-galactosidases from A. aculeatus and K. lactis, due to the presence of glycerol as enzyme stabiliser.     

Ionic effects on the behavior of thermoresponsive PEO–PNIPAAm block copolymers

The temperature‐dependent aggregation and recovery of the copolymer poly(ethylene oxide)₂₂‐b‐poly(N‐isopropylacrylamide)₂₉ with a C₁₂ end‐cap in aqueous solutions of salts and acids are investigated. Salt solutions affected the critical aggregation temperature of the copolymer in a manner predictable according to the Hofmeister series, with the kosmotropic adipic ion lowering the critical aggregation temperature and the chaotropic iodide raising it. Also, both salts and acids increased the size of copolymer aggregates formed with heating, due to the electrostatic shielding of aggregated structures provided by the electrolytes. Additionally, the presence of ionic additives caused a thermohysteretic increase in the size of copolymer aggregates with temperature cycling. The transitions of polymer structure with increasing temperature were surprisingly sharp with the C₁₂ end‐cap present, and particularly broad in samples in which the end cap had been cleaved. This observation suggested that the hydrophobic end group was responsible for imparting some degree of order to the polymer at low temperatures, which allowed for rapid reconfiguration with increasing temperature. Finally, in addition to the transitions expected from the least critical solution temperature behavior of the polymer blocks, we have observed an unexpected additional transition which we attribute to the contraction of the poly(ethylene oxide) chains of the copolymer aggregates at higher temperatures. This work illustrates the importance of considering the environment and composition of thermoresponsive block copolymers in certain applications, particularly in solutions with even modest electrolyte concentrations (1–10 mM), as it can have a profound effect on transition temperatures and morphology. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 507–516     

Multilayered films fabricated from plasmid DNA and a side-chain functionalized poly(beta-amino ester): surface-type erosion and sequential release of multiple plasmid constructs from surfaces

Hydrolytically degradable polyamines can be used to fabricate multilayered polyelectrolyte films that erode and release DNA in aqueous environments. Past studies have investigated films fabricated from poly(beta-amino ester) 1 and the influence of polymer backbone structure on film erosion and the release of anionic polyelectrolytes. This investigation sought to characterize the influence of polymer side-chain structure on the stability of multilayered films in physiologically relevant media. Here, we report on the fabrication and characterization of multilayered films approximately 150 nm thick assembled from plasmid DNA and side-chain functionalized polymer 2. We observed large differences in the behavior of films fabricated from polymer 2 as compared to films fabricated from polymer 1. Whereas films fabricated from polymer 1 erode and release DNA over approximately 2 days when incubated in phosphate-buffered saline, films fabricated from polymer 2 erode and release DNA over approximately 2 weeks. In addition, whereas films fabricated from polymer 1 undergo complex nanometer-scale physical transformations in aqueous media, characterization of the surfaces of films fabricated from polymer 2 by atomic force microscopy (AFM) demonstrates that the surfaces of these materials remain smooth and uniform during erosion. The apparent surface-type erosion of these materials permits the fabrication of ultrathin films with architectures that provide control over the timing and the order in which two different DNA constructs are released from surfaces. For example, the order in which two different DNA constructs are released from films and expressed by cells can be controlled to measurable extents by the relative order in which they are deposited during fabrication. These results suggest approaches to the localized and sequential release of multiple different DNA constructs to cells or tissues from the surfaces of tissue engineering scaffolds or implantable devices coated with multilayered films.     

Derivatives of 2-thiohydantoin as spectrophotometric analytical reagents. III

Summary The synthesis, characteristics, properties and reactions with metallic ions of the furfural-, thiophenal-, pyrrolal-, cinnamal-, acetal-, and propional-derivatives of 2-thiohydantoin have been studied. The reagents exhibit twopK values in aqueous solution, and sensitive colour reactions with Pd(II), Cu(I) and (II), Ag(I) and Hg(II). A comparison has been made of the reactivity of all the 2-thiohydantoin derivatives we have studied to date and conclusions have been drawn regarding the influence of the aromatic ring connected to 2-thiohydantoin.

---

Derivative des 2-Thiohydantoins als spektrophotometrische Reagenzien. III

Zusammenfassung Die Synthese, die Kennzahlen, die Eigenschaften der Furfural-, Thiophenal-, Pyrrolal-, Acetal-, Propional- sowie des Zimtsäurealdehyd-Derivates des 2-Thiohydantoins und deren Reaktionen mit Metallionen wurden untersucht. In wäßriger Lösung kommen diesen Reagenzien zwei pK-Werte zu. Sie geben empfindliche Farbreaktionen mit Pd(II), Cu(I) und (II), Ag(I) und Hg(II). Die Reaktivität der genannten Derivative wurde untersucht und der Einfluß des mit 2-Thiohydantoin verbundenen aromatischen Ringes daraus ermittelt.