Assessment of two‐equation turbulence modelling for high Reynolds number hydrofoil flows

This paper presents an evaluation of the capability of turbulence models available in the commercial CFD code FLUENT 6.0 for their application to hydrofoil turbulent boundary layer separation flow at high Reynolds numbers. Four widely applied two‐equation RANS turbulence models were assessed through comparison with experimental data at Reynolds numbers of 8.284×106 and 1.657×107. They were the standard k–εmodel, the realizable k–εmodel, the standard k–ωmodel and the shear‐stress‐transport (SST) k–ωmodel. It has found that the realizable k–εturbulence model used with enhanced wall functions and near‐wall modelling techniques, consistently provides superior performance in predicting the flow characteristics around the hydrofoil. Copyright © 2004 John Wiley & Sons, Ltd.     

Novel dinitroxide mediating agent for stable free‐radical polymerization

A novel dinitroxide mediating agent that was suitable for stable free‐radical polymerization was synthesized and used in the block copolymerization of styrene and t‐butyl styrene. Quantitative yields of a novel dinitroxide based on 1,6‐hexamethylene diisocyanate and 4‐hydroxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy were obtained. Various experimental parameters, including the nitroxide‐to‐initiator molar ratio, were examined, and it was determined that the polymerization was most controlled under conditions similar to those of conventional 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated stable free‐radical polymerization. Moreover, the dinitroxide mediator proved to be a viable route for the facile two‐step synthesis of triblock copolymers of styrene and t‐butyl styrene. However, the dinitroxide mediation process resulted in a higher than expected level of nitroxide decomposition, which resulted in polymers possessing a terminal alkoxyamine and an adjacent hydroxylamine rather than a preferred internal bisalkoxyamine. This decomposition resulted in the formation of diblock copolymer species during the triblock copolymer synthesis. Gel permeation chromatography was used to monitor the chain‐end decomposition kinetics, and the determined observed rate constant (5.89 × 10^?5 s^?1) for decomposition agreed well with previous studies for other dinitroxide mediating agents. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1547–1556, 2004     

Post-column reaction detection of biotin in human plasma ultrafiltrate based on laser-induced fluorescence energy transfer in the far-red spectral region

High performance liquid chromatography followed by post-column reaction detection in the far-red spectral region provides added sensitivity and selectivity. A homogeneous fluorescence energy transfer assay in the competitive mode based on the binding of biotin and streptavidin was developed as an on-line post-column reaction detection system. The labels used for energy transfer were R-Phycoerythrin conjugated to biotin and Cyanine 5 labeled with streptavidin. The energy transfer peak was measured at 670 nm and excitation was achieved using the 488 nm line of an argon ion laser. The biotin concentration in plasma ultrafiltrate ranged from 0.024 to 6.12 ng/mL (n = 6). The precision of the two controls, 0.24 and 2. 44 ng/mL, was found to be 18.70% and 9.92% relative standard deviation respectively. Accuracy was 10.47% and 1.95% difference from spiked, respectively (n = 6). The limit of detection was 21.70 pg/mL (8.90 x 10(-11)M) calculated based on a factor of 2x the standard deviation of the blank (n = 6). The correlation coefficient for the calibration curve was found to be 0.9995. Recovery from plasma ultrafiltrate at 2.44 ng/mL was 103.40% (n = 6). Detection selectivity was indicated by the absence of background fluorescence in six different plasma samples collected from six individual donors. Endogenous levels were detected in two of the six pools of plasma ultrafiltrates.     

Conformational effects in 3-halotetrahydropyrans

The conformational equilibria of 3-chloro- and 3-bromotetrahydropyran were measured by NMR and IR spectroscopy using model 2-alkyl-5-halotetrahydropyrans. The 3-chloro compound was 76·2% equatorial in carbon tetrachloride and 58·5% in acetonitrile and the 3-bromo compound 85% equatorial in carbon tetrachloride. The conformational equilibrium is discussed in terms of dipole, electronic and van der Waals effects.     

In situ soft X-ray studies of ethylene oxidation mechanisms and intermediates on the Pt(111) surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.     

Synthesis and Reaction Chemistry of the Disodium Alkoxide of 2,6-Bis(trifluoromethyl)-2,6-dihydroxy-3,3,4,4,5,5-hexafluorooxane

The disodium alkoxide of 2,6-bis(trifluoromethyl)-2,6-dihydroxy-3,3,4,4,5,5-hexafluorooxane, C(7)F(12)O(3)Na(2), 1, was prepared by reaction of the corresponding diol with MeONa in MeOH. This cyclic alkoxide readily mimics the reaction chemistry of the lithium and sodium alkoxides of perfluoropinacol. The reaction of the alkoxide 1 with covalent dichlorides and metallocene dichlorides yields a series of novel bicyclic ring systems. The crystal structure of the trioxasilane, 3, formed from (CH(3))(2)SiCl(2) was determined to provide structural information about these ring systems. Crystal data: C(9)H(6)O(3)F(12)Si, fw = 418.21 u, orthorhombic space group, Pnma (No. 62), a = 15.822(3) ?, b = 12.163(3) ?, c = 7.373(2) ?, V = 1418.9(4) ?(3), and D(calc) = 1.96 g cm(-)(3) for Z = 4 (molecule possesses mirror symmetry). Least-squares refinement on 1075 observed reflections (I > 3sigma(I)) converged with R = 0.0357 and R(w) = 0.0478.     

Oxygen isotope corrections for online delta(34)S analysis

Elemental analyzers have been successfully coupled to stable-isotope-ratio mass spectrometers for online measurements of the delta(34)S isotopic composition of plants, animals and soils. We found that the online technology for automated delta(34)S isotopic determinations did not yield reproducible oxygen isotopic compositions in the SO(2) produced, and as a result calculated delta(34)S values were often 1-3 per thousand too high versus their correct values, particularly for plant and animal samples with high C/S ratio. Here we provide empirical and analytical methods for correcting the S isotope values for oxygen isotope variations, and further detail a new SO(2)-SiO(2) buffering method that minimizes detrimental oxygen isotope variations in SO(2).     

First Synthesis of 3-Mercapto-2(1H)-pyridinone, a Simple Disubstituted Pyridine Useful for Synthesis of the 4-Azaphenoxathiine Ring System and Its Novel Diazaphenoxathiine Analogs: 1,6-Diazaphenoxathiine and 2,6-Diazaphenoxathiine(1)

3-Mercapto-2(1H)-pyridinone (1) can be synthesized in three simple high-yielding steps from readily available 2-tert-butylthiazolo[4,5-b]pyridine (2). Its disodium salt condenses with o-chloronitrobenzene, 2-chloro-3-nitropyridine, and 3-chloro-4-nitropyridine 1-oxide to give respectively 4-azaphenoxathiine (10), 1,6-diazaphenoxathiine (12), and 2,6-diazaphenoxathiine 2-oxide (14) which reduces to 2,6-diazaphenoxathiine (15). The structures of these previously unreported azaphenoxathiine systems were confirmed by assignment of their respective (13)C NMR spectra.