Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Model compounds of caged capsaicin: design, synthesis, and photoreactivity

Molecules were prepared with substituted nitrobenzyl groups covalently bonded to N-(4-hydroxy-3-methoxybenzyl)acetamide (2) by ether or carbonate linkages. These compounds decomposed under irradiation at 363 nm. Those with carbonate linkages decomposed at slower rates than those with ether linkages. Molecules with dimethoxy-substituted benzyl groups decomposed more slowly than monomethoxy-substituted benzyl groups due to the electronic characteristics of the benzylic carbon.     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Some aspects for sintering of β-rhombohedral boron

The investigation of sintering conditions for magnesiothermic amorphous boron (Mg_mB_n) powder is presented. The results of chemical and X-ray analyses of magnesiothermic boron (Mg_mB_n) indicate that it consists of amorphous boron MgB₁₂ and a lesser amount of β-rhombohedral boron. The Mg_mB_n-sintering process is determined by the conditions of amorphous boron transformation into β-boron (crystallization), such as the process of decomposition of MgB₁₂ followed by formation of the “new” centers of active elementary boron. As a result of the experimental investigations of this process the following three stages—thermal decompositions, crystallization and Mg_mB_n sintering—were combined into one sintering process with the sintered bodies as a result of it.     

The studies of structural aspects of the cluster formation in silicate glasses doped with cerium and titanium oxides by small-angle neutron scattering

The structural aspects of the formation of Ti-Ce-O nanoclusters in silicate glasses doped with oxides TiO₂ and CeO₂ have been studied by means of small-angle neutron scattering. It has been obtained that, in such glasses, complex oxide nanoclusters with sizes of 300–380 Å are formed; their average size increases and the fractal dimension is changed as the concentration of the initial oxides increases. Correlation between the structural characteristics of the nanoclusters and the optical properties of the doped silicate glasses is discussed.     

Nonstationarity and related measures for time‐dependent hartree–fock and multiconfigurational models

Based on an earlier article (Eberly and Singh, Phys. Rev. D 1973 , 7, 359) and related works on short‐time evolution, this article proposes a many‐electron formulation for the nonstationarity degree which can be assigned to quantum system at each time point. The key measure introduced, , is a nonstationarity index that can be thought of as an inverse nominal lifetime at each instance of time. The index is directly computed from the time derivative of one‐electron density matrix and is a size‐consistent quantity. In this article, the approach is developed for the time‐dependent Hartree–Fock (TDHF), single‐excitation (TDCIS), and time‐dependent full configuration interaction (TDFCI) models. As a rule, nonstationarity effects are more pronounced in correlated electron systems, and a joint analysis of and the multiconfigurational character of wave functions apparently provide a deeper insight into dynamical molecular processes. The performed calculations on small molecules in laser fields show a preference for the TDCIS model when comparing TDCIS and TDHF with the “exact” TDFCI model. © 2013 Wiley Periodicals, Inc.     

Facile synthesis of C-phosphanylformamidines via a carbene pathway

A direct synthetic approach to C-phosphanyl-N,N-dialkyl-N′-aryl(alkyl)-formamidines was developed. It was shown that phosphorylation of the formamidines proceeds at the nitrogen atom affording N-phosphanylformamidinium salts. Upon deprotonation, these salts gave C-phosphanylformamidines via formation of carbenes followed by a 1,2-phosphorus shift.     

Carbon-nanotube-based saturable absorbers for near infrared solid state lasers

We demonstrate the passive mode-locking of a diode-pumped Nd⁺³:YAG (central wavelength: 1.32 μm; pulse duration: 50 ps; output energy: up to 70 μJ) laser using a polymer film containing single-wall carbon nanotubes. The mode-locking regime is stable at a pump repetition rate of up to 1 kHz. We also investigate the temporal evolution of the light-induced absorption change of the polymer film containing carbon nanotubes in the spectral range of 1.3–1.5 μm by femtosecond time-resolved pump-probe measurements. The measurements reveal that light-induced transmission exhibits fast and slow components that last 280 fs and more than 10 ps, respectively. The third-order susceptibility of the polymer film containing single wall carbon nanotubes is as high as 10⁻¹¹ esu.     

Krylov-Bogolyubov averaging of asymptotically autonomous differential equations

We apply the Krylov and Bogolyubov asymptotic integration procedure to asymptotically autonomous systems. First, we consider linear systems with quasi-periodic coefficient matrix multiplied by a scalar factor vanishing at infinity. Next, we study the asymptotically autonomous Van-der-Pol oscillator.