Studies on reactive intermediates. Part I. An approach to the synthesis of 2-phenyl-7-carbethoxy-5H-1,3,4-thiadiazolo[2,3-a]pyrimidin-5-one

2-Phenyltetrazolo[4,5-a]-1,3,4-thiadiazole ( 4 ), in its azido form, reacted with diethyl fumarate and diethyl maleate to give 2-phenyl-7-carbethoxy-5H-1,3,4-thiadiazolo[2,3-a]pyrimidin-5-one ( 5 ). To assign the structure of compound 5 , 2-phenyl-5-carbethoxy-7H-1,3,4-thiadiazolo[2,3-a]pyrimidin-7-one ( 6 ) was prepared from the reaction of 2-amino-5-phenyl-1,3,4-thiadiazole ( 7 ) with diethylacetylene dicarboxylate. Physical properties and spectral data of compound 6 were different from compound 5 . Theoretical and experimental aspects are discussed.     

Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples

This paper demonstrates the application of composite multi-walled carbon nanotube (MWNT) polyvinylchloride (MWNT-PVC) based on 1,5-diphenylcarbazide as chromium ionophore in potentiometric measurement. The sensor shows a good Nernstian slope of 19.52 ± 0.40 mV/decade in a wide linear range concentration of 6.3 × 10⁻⁸ to 1.0 × 10⁻² M for Cr(NO₃)₃. The detection limit of this electrode was found to be 3.2 × 10⁻⁸ M of Cr(NO₃)₃ and is applicable in a pH range of 3.0-6.8. It has a short response time of about 10 s. This chromium electrode has a good selectivity over 16 various metal ions. The practical analytical utility of this electrode was demonstrated by measurement of Cr(III) in drinking water and mineral water samples without any serious preliminary pre-treatment and chromium in multivitamin.     

Preparation and characterization of fibres from a thermotropic liquid crystal polyester with non-coplanar biphenylene units

Abstract

Fibres were prepared from the nematic melt of poly(2,2′-dimethyl-4,4′-biphenylene phenylterephthalate). The phenyl substitution in the terephthalic acid moiety in combination with the non-coplanar biphenyl moiety prevent crystallization of this thermotropic polyester. Oriented fibres were prepared by two different methods. Similarly to other thermotropic liquid crystal polymer fibres, chain orientation can be achieved by an elongational flow in a down draw process. This polyester also allows tensile deformation of the spun fibres around the glass transition temperature. In both routes similar degrees of orientation and mechanical properties were obtained. Tensile moduli in the order of 40–45 GPa and tensile strengths up to 550–650 MPa were obtained. The orientation function values were determined to be in the order of 0·8–0·9. A comparison with other unsubstituted thermotropic liquid crystal polyesters at the same level of orientation revealed that the moduli are the same, although the substituents increase the chain diameter. This result may be attributed to an increase of the apparent shear modulus due to an interlocking mechanism of the rigid lateral substituents.     

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

A Molecular Approach to Self‐Supported Cobalt‐Substituted ZnO Materials as Remarkably Stable Electrocatalysts for Water Oxidation

In regard to earth‐abundant cobalt water oxidation catalysts, very recent findings show the reorganization of the materials to amorphous active phases under catalytic conditions. To further understand this concept, a unique cobalt‐substituted crystalline zinc oxide (Co:ZnO) precatalyst has been synthesized by low‐temperature solvolysis of molecular heterobimetallic Co_4?xZn_xO₄ (x=1–3) precursors in benzylamine. Its electrophoretic deposition onto fluorinated tin oxide electrodes leads after oxidative conditioning to an amorphous self‐supported water‐oxidation electrocatalyst, which was observed by HR‐TEM on FIB lamellas of the EPD layers. The Co‐rich hydroxide‐oxidic electrocatalyst performs at very low overpotentials (512 mV at pH 7; 330 mV at pH 12), while chronoamperometry shows a stable catalytic current over several hours.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Magnetic Solid Phase Extraction Coupled with HPLC Towards Removal of Pigments and Impurities from Leaf-derived Paclitaxel Extractions of Taxus baccata and Optimization via Response Surface Methodology

A reusable and cost-effective magnetic graphite oxide (Fe₃O₄NPs@GO) nanocomposite was fabricated and applied for pre-purification of paclitaxel from leaf-derived crude extract of Taxus baccata. Furthermore, the potential roles of three crucial criteria (i.e., adsorbent dosage, sorption temperature and agitation/shaking power) on the two responses [i.e., efficiency of plant pigments removal (EPPR) and efficiency of taxol purity (ETP)] were examined and simultaneously optimized through response surface methodology. The nanocomposite was accurately characterized using TEM, AFM, BET, FT-IR, Raman and VSM. Moreover, for both proposed second-degree polynomial regression models, highly significant correlations were achieved between the experimental and predicted data (p < 0.0001). Meanwhile, the optimum conditions to simultaneously acquire the maximum EPPR (94.0 %) and ETP (11.4 %) were recorded as adsorbent dosage of 37.7 g L⁻¹, sorption temperature of 30.7 °C and agitation power of 153.1 rpm; and the predictive results were confirmed using experimental rechecking survey. Interestingly, upon five consecutive treatments, the nanocomposite still exhibited substantial potency in eliminating large amounts of plant pigments and impurities (up to 90 %), without significant reduction on sorption capacity and magnetism thereof. Our results demonstrated that the current nanocomposite, as SPE sorbent for MSPE, could be a simple, fast and reusable approach for HPLC-based purification studies of paclitaxel, and probably other plant secondary metabolites.

     

Magnetic CuO nanoparticles supported on graphene oxide as an efficient catalyst for A3-coupling synthesis of propargylamines

Magnetically separable CuO nanoparticles supported on graphene oxide (Fe₃O₄ NPs/GO-CuO NPs) is synthesized and characterized for the preparation of propargylamines in EtOH, at 90℃. Fe₃O₄ NPs/GO-CuO NPs is found to be an efficient catalyst for the A³-coupling of aldehydes, amines, and alkynes through C-H activation. Both aromatic and aliphatic aldehydes and alkynes are combined with secondary amines to provide a wide range of propargylamines in moderate to excellent yields.     

Synthesis of new water soluble diorganotin(IV) complexes with hydrazones derived from Girard-T reagent as antibacterial and anticancer agents

Three new water-soluble organotin complexes R₂Sn(5-BrSalGT)Cl [R = Ph, Me] and Ph₂Sn(2-OHNaphGT)Cl have been synthesized by the reaction of R₂SnCl₂ (R = Ph or Me) with Schiff bases derived from condensation of Girard-T reagent with 5-bromosalicylaldehyde and 2-naphthaldehyde, (5-BrH₂SalGT)Cl (1) and (2-OHH₂NaphGT)Cl (2). The synthesized compounds have been investigated by elemental analysis, conductometric measurements, IR, ¹H NMR, and ¹¹⁹Sn NMR spectroscopy. These data show that the deporotonated ligand is coordinated to Sn(IV) via ONO atoms and six-coordinate zwitterionic complexes are formed. The ligands and their complexes were investigated for their in vitro toxicity against Gram-positive (Bacillus subtilis and Staphylococcus aureus) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. The results show remarkable antibacterial activity against the studied bacteria. All complexes exhibit more inhibitory effects than the parent ligand. The anticancer activity of all compounds were also performed on HN5 cell line and (2-OHH₂NaphGT)Cl with concentration of 1 mg mL^?1 was found to show higher anticancer activity than other compounds.     

Chemical and nanomechanical analysis of rice husk modified by ATRP-grafted oligomer

Rice husk (RH), an abundant agricultural residue, was reacted with 2-bromoisobutyryl bromide, to convert it to a heterogeneous polyfunctional macroinitiator for Atom Transfer Radical Polymerization (ATRP). The number of active sites placed on the RH surface was small, but they were ATRP active. Non-polar methyl methacrylate (MMA) and polar acrylonitrile (AN) were polymerized from the RH, and a sequential monomer addition was used to prepare an amphiphilic PMMA-b-PAN copolymer on RH surface. FTIR qualitatively confirmed the grafting. Gravimetric and XPS analysis of the different RH surface compositions indicated thin layers of oligomeric PMMA, PAN, and PMMA-b-PAN. The modified surfaces were mapped by nanomechanical AFM to measure surface roughness, and adhesion and moduli using the Derjaguin-Muller-Toropov model. RH grafted with MMA possessed a roughness value of 7.92, and a hard and weakly adhering surface (13.1 GPa and 16.7 nN respectively) while RH grafted with AN yielded a roughness value of 29 with hardness and adhesion values of 4.0 GPa and 23.5 nN. The PMMA-b-PAN modification afforded a surface with a roughness value of 51.5 nm, with hardness and adhesion values of 3.0 GPa and 75.3 nN.