Chromium(III) ion-selective electrode based on 4-dimethylaminoazobenzene

A PVC-based membrane of 4-dimethylaminoazobenzene reveals a Nernstian potentiometric response (with slope of 19.5+/-0.6 mV/decade and a correlation coefficient of 0.999) for Cr(III) over a wide concentration range (1.66 x 10(-6)-1.0 x10(-2) mol dm(-3)). The potential of this electrode is independent of pH in the range of 3.0-5.5. It has a fast response time of about 10 s and was used for a period of 3 months with good reproducibility. The detection limits of this membrane electrode was 8 x 10(-7) M. the proposed electrode has been used as an indicator electrode in the potentiometric titration of Cr(III) with EDTA. This sensor exhibits a very good selectivities for Cr(III) over a wide variety of metal ions.     

Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples

This paper demonstrates the application of composite multi-walled carbon nanotube (MWNT) polyvinylchloride (MWNT-PVC) based on 1,5-diphenylcarbazide as chromium ionophore in potentiometric measurement. The sensor shows a good Nernstian slope of 19.52 ± 0.40 mV/decade in a wide linear range concentration of 6.3 × 10⁻⁸ to 1.0 × 10⁻² M for Cr(NO₃)₃. The detection limit of this electrode was found to be 3.2 × 10⁻⁸ M of Cr(NO₃)₃ and is applicable in a pH range of 3.0-6.8. It has a short response time of about 10 s. This chromium electrode has a good selectivity over 16 various metal ions. The practical analytical utility of this electrode was demonstrated by measurement of Cr(III) in drinking water and mineral water samples without any serious preliminary pre-treatment and chromium in multivitamin.     

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

A Molecular Approach to Self‐Supported Cobalt‐Substituted ZnO Materials as Remarkably Stable Electrocatalysts for Water Oxidation

In regard to earth‐abundant cobalt water oxidation catalysts, very recent findings show the reorganization of the materials to amorphous active phases under catalytic conditions. To further understand this concept, a unique cobalt‐substituted crystalline zinc oxide (Co:ZnO) precatalyst has been synthesized by low‐temperature solvolysis of molecular heterobimetallic Co_4?xZn_xO₄ (x=1–3) precursors in benzylamine. Its electrophoretic deposition onto fluorinated tin oxide electrodes leads after oxidative conditioning to an amorphous self‐supported water‐oxidation electrocatalyst, which was observed by HR‐TEM on FIB lamellas of the EPD layers. The Co‐rich hydroxide‐oxidic electrocatalyst performs at very low overpotentials (512 mV at pH 7; 330 mV at pH 12), while chronoamperometry shows a stable catalytic current over several hours.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Particle size effects in Fischer-Tropsch synthesis by Co catalyst supported on carbon nanotubes

The effect of Co particle size on the Fischer-Tropsch synthesis (FTS) activity of carbon nanotube (CNT)-supported Co catalysts was investigated. Microemulsion (using water-to-surfactant molar ratios of 2 to12) and impregnation techniques were used to prepare catalysts with different Co particle sizes. Kinetic studies were performed to understand the effect of Co particle size on catalytic activity. Size-dependent kinetic parameters were developed using a thermodynamic method, to evaluate the structural sensitivity of the CNT-supported Co catalysts. The size-independent FTS reaction rate constant and size-independent adsorption parameter increased with increasing reac-tion temperature. The Polani parameter also depended on catalyst particle size, because of changes in the catalyst surface coverage.     

Chemical wave studies in the bromate–pyrocatechol beads system

We studied the chemical wave activity of the pyrocatechol‐acidic bromate system in the presence of ferroin‐loaded beads. The wave activity lasted for more than 24 h while meandering spirals continued for up to 10 h. Rigid and meandering spiral waves were investigated. We have analyzed the wave propagation speed and spiral tip trajectory versus the initial concentrations of all reagents as well as the age of the solution. Wave velocity depends on [H⁺] and [BrO] concentrations by the relationship v=k[H⁺]^1/2[BrO]^1/2, which is in agreement with other studies. This system is ideal to study wave activity and spiral waves as it does not produce precipitates under the studied conditions. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 198–203, 2011     

Chemical and nanomechanical analysis of rice husk modified by ATRP-grafted oligomer

Rice husk (RH), an abundant agricultural residue, was reacted with 2-bromoisobutyryl bromide, to convert it to a heterogeneous polyfunctional macroinitiator for Atom Transfer Radical Polymerization (ATRP). The number of active sites placed on the RH surface was small, but they were ATRP active. Non-polar methyl methacrylate (MMA) and polar acrylonitrile (AN) were polymerized from the RH, and a sequential monomer addition was used to prepare an amphiphilic PMMA-b-PAN copolymer on RH surface. FTIR qualitatively confirmed the grafting. Gravimetric and XPS analysis of the different RH surface compositions indicated thin layers of oligomeric PMMA, PAN, and PMMA-b-PAN. The modified surfaces were mapped by nanomechanical AFM to measure surface roughness, and adhesion and moduli using the Derjaguin-Muller-Toropov model. RH grafted with MMA possessed a roughness value of 7.92, and a hard and weakly adhering surface (13.1 GPa and 16.7 nN respectively) while RH grafted with AN yielded a roughness value of 29 with hardness and adhesion values of 4.0 GPa and 23.5 nN. The PMMA-b-PAN modification afforded a surface with a roughness value of 51.5 nm, with hardness and adhesion values of 3.0 GPa and 75.3 nN.     

Synthesis and characterization of molybdenum (VI) complex immobilized on polymeric Schiff base-coated magnetic nanoparticles as an efficient and retrievable nanocatalyst in olefin epoxidation reactions

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired catalytic system was prepared via complexation of the Schiff base groups with MoO₂(acac)₂. The resulting nanoparticles were characterized by infrared spectroscopy, powder X-ray diffraction, scanning and transmission electron microscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, vibrating sample magnetometry and thermogravimetric analysis. This heterogenized catalytic system was also found to be highly active, sustainable and recyclable nanocatalyst in alkene epoxidation. Eventually, the attractive features of the synthesized catalyst such as simple work-up, good stability, magnetic separation, high TOF and high surface area; make it appropriate for oxidation reactions.     

Density functional theory study of the regio‐ and stereoselectivity of 1,3-dipolar cycloaddition reactions between 2-ethylthio-4-phenyl-1-azetin and some substituted nitrile oxides

The mechanism (regio- and stereoselectivity) of 1,3-dipolar cycloaddition (1,3-DC) of 2-ethylthio-4-phenyl-1-azetin 1 with benzonitrile oxide 2a, 2-aminobenzonitrile oxide 2b and 2-azidobenzonitrile oxide 2c has been investigated by density functional theory-based reactivity indices and activation energy calculations at B3LYP/6-31G(d,p) level of theory in the gas and solvent phase. Thermodynamic and kinetic parameters of the possible ortho/meta regioisomeric and endo/exo stereoisomeric pathways have been determined. In order to rationalize complete endo selective fashion provided by these 1,3-DC cycloadditions, a natural steric analysis between NLMOs i,j for TS1ox and TS1on and also a second-order interaction energy, E ², analysis between the donor–acceptor orbitals in these TSs were carried out. In all cases, the ortho pathways are more favorable compared to the meta alternatives and it is found that the endo pathway is preferred. Our results show that these cycloadditions follow an asynchronous one-step mechanism with a nonpolar character. Theoretical data are in good agreement with the experimental results.