Annealing and measurement temperature dependence of W2B5-based rectifying contacts to n-GaN

The thermal stability and measurement temperature dependence of Schottky contact characteristics on n-GaN using a W₂B₅/Ti/Au metallization scheme was studied using current-voltage (I-V), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) measurements. The elemental profile obtained from samples annealed at 350 °C showed some titanium diffusion into the gold layer but little other difference from the as-deposited wafer. Annealing at 700 °C produced significant diffusion of titanium. The Schottky barrier height increased with anneal temperature up to 200 °C, reaching a maximum value of 0.65 eV, but decreased at higher annealing temperatures. The reverse breakdown voltage from diodes fabricated using the W₂B₅-based contacts showed a similar dependence. The reverse current magnitude was larger than predicted by thermionic emission alone. The barrier height showed only minor changes with measurement temperature up to 150 °C.     

Multifunctional ToF-SIMS: combinatorial mapping of gradient energy substrates

We present a simple method for chemical modification of chlorosilane self-assembled monolayers (SAMs) on Si surfaces by exposure to a gradient of UV-ozone radiation to create stable substrates with a range of contact angles (θ_H2O≈5–95°) and surface energies on a single substrate. These gradient energy substrates are developed to potentially generate libraries for combinatorial studies of thin film phenomenology, where a systematic variation of interfacial surface energy represents one of the significant parameters along one axis. The graded oxidation process presents a systematic variation of surface chemical composition. We have utilized contact angle measurements and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to investigate this variation for a series of ions, among which are SiCH₃⁺, SiOH⁺ and COOH⁻. We show that the macroscopic measurements of surface free energy/contact angle correlate with the detailed analysis of surface chemistry (as assessed by ToF-SIMS) on these test substrates.     

Oxidation of cyclohexane with molecular oxygen using a Schiff base cobalt complex bonded to carbamate-modified silica gel

The Schiff base [1,2-bis(salicylidene amino)phenylene]cobalt(II) complex, chemically bonded to a carbamate-modified silica gel catalyst, has been prepared by a four step procedure. The oxidation of cyclohexane was studied in the presence of this catalyst under relatively mild conditions (150–200 °C, 15–20 atm) using molecular oxygen. The catalyst was found to be very selective for the production of cyclohexanol, with cyclohexanone formed in only a small amount (45:1). This is in contrast to the commercially available processes in which cyclohexanol and cyclohexanone are both formed in appreciable amounts. The t.g.a. analysis shows the catalyst to be stable up to 211 °C and atomic absorption spectroscopy indicated negligible metal loss during 50 h use of the catalyst up to 180 °C.     

Telluro- and seleno-bridged TiIV-MII (M = Ni,Pd, Pt) heterobimetallic complexes

Summary Heterobimetallic complexes of the types [Cp₂Ti(-EAr)₂-M(dppe)] (ClO₄)₂ [(1)–(4); M, E = Ni, Te (1); Ni, Se (2); Pt, Te (3); Pt, Se (4); Ar = Ph (a), C₆H₄-4-Me (b), C₆H₄-4-OMe (c), C₆H₄-4-OEt (d)] and [Cp₂Ti(-TeAr)₂-MCl ₂] [M = Pd (5), Pt (6)] were obtained by the reactions of Cp₂Ti(EAr)₂ with M(dppe)(ClO₄)₂ and M(PhCN)₂Cl₂, respectively. While (1), (5) and (6) are stable in the solid state as well as in solution, (2)–(4) undergo dissociation to M(dppe)(EAr)₂ and Cp₂Ti(ClO₄)₂ in solution, as shown by multinuclear (³¹P{¹H},¹⁹⁵Pt{¹H}, ¹²⁵Te{¹H}) n.m.r. studies. The reaction of Cp₂Ti(SeAr)₂ with M(PhCN)₂Cl₂, however, leads to the formation of Cp₂TiCl₂ and a polymeric material [M(SeAr)₂] _n .     

A convenient synthesis of linear pyranocoumarins. Xanthyletin and 3-Phenylxanthyletin

A convenient synthesis of linear pyranocoumarins, viz., 8,8-dimethyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (xanthyletin,1) and 8,8-dimethyl-3-phenyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (3-phenylxanthyletin,2) is described. The key steps are blocking the 8-position of appropriate 7-hydroxy-2H-1-benzopyran-2-one derivatives with iodine and 1,1-dimethyl-2-propynylation followed by cyclisation.

---

Ein einfacher Syntheseweg zu linearen Pyranocumarinen. Xanthyletin und 3-Phenylxanthyletin

Zusammenfassung Es wird ein vorteilhafter Weg zur Synthese von linearen Pyranocumarinen am Beispiel von Xanthyletin und 3-Phenylxanthyletin gezeigt. Das Syntheseprinzip besteht in einer Blockierung der 8-Position des entsprechenden 7-Hydroxy-2H-1-benzopyran-2-ons mit Jod und einer 1,1-Dimethyl-2-propinylierung mit nachfolgender Cyclisierung.

     

An efficient route to regioselective opening of N-tosylaziridines with zinc(II) halides

An efficient route for the regio- and stereoselective ring opening of N-tosylaziridines with zinc dihalides (ZnX₂, X = Cl, Br, I) is described. Depending on the solvent and Zn(II) halide, β-halo amines or imidazolines are obtained selectively in good to excellent yields.     

Cu-nanoparticles: a chemoselective catalyst for the aza-Michael reactions of N-alkyl- and N-arylpiperazines with acrylonitrile

A novel method for effecting the aza-Michael reactions of N-alkyl- and N-arylpiperazines with acrylonitrile using Cu-nanoparticles is described. The method features the use of 10 mol % Cu (14-17 nm) nanoparticles under mild reaction conditions to afford the addition products in good to excellent yields. The Cu-nanoparticles selectively catalysed the aza-Michael reaction of N-alkyl- and N-arylpiperazines in the presence of aromatic amino or aliphatic hydroxy groups.     

A new macrocyclic polystyrene-based sensor for chromium (III) ions

A new tetradentate dihydrogen perchlorate macrocyclic ligand (2,4,9,11-tetraphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene dihydrogen perchlorate) was prepared and characterised. The macrocycle behaves as a selective chelating ion-exchanger for some metal ions. The polystyrene-based membrane electrode is found to exhibit quite promising selectivity for Cr3+ ions. It can be used to estimate chromium concentrations in the range 3.16x 10(-6)-1.00x10(-1) M with a near-Nernstian slope of 17.5 mV per decade of concentration between pH 3.0 to 6.5. The electrode is found to possess a fast response time of 15 s and was used over a period of three months with good reproducibility (s = +/- 0.3 mV). The selectivity coefficient values for mono-, di- and trivalent cations indicate excellent selectivity for Cr3+ ions over a large number of other cations. Anions such as Cl- and SO4(2-) do not interfere and the electrode also works satisfactorily in a mixed organic-water solution. The sensor has been used as an indicator electrode for the potentiometric titration of Cr3+ with EDTA. The practical utility of the membrane sensor has also been demonstrated in solutions contaminated with detergents (CTAB and SDS). Above all, the membrane sensor has been very successfully used to determine Cr3+ in some foods.     

Biocatalytic reversible control of the stiffness of DNA-modified responsive hydrogels: applications in shape-memory,self-healing and autonomous controlled release of insulin

The enzymes glucose oxidase (GOx), acetylcholine esterase (AchE) and urease that drive biocatalytic transformations to alter pH, are integrated into pH-responsive DNA-based hydrogels. A two-enzyme-loaded hydrogel composed of GOx/urease or AchE/urease and a three-enzyme-loaded hydrogel composed of GOx/AchE/urease are presented. The biocatalytic transformations within the hydrogels lead to the dictated reconfiguration of nucleic acid bridges and the switchable control over the stiffness of the respective hydrogels. The switchable stiffness features are used to develop biocatalytically guided shape-memory and self-healing matrices. In addition, loading of GOx/insulin in a pH-responsive DNA-based hydrogel yields a glucose-triggered matrix for the controlled release of insulin, acting as an artificial pancreas. The release of insulin is controlled by the concentrations of glucose, hence, the biocatalytic insulin-loaded hydrogel provides an interesting sense-and-treat carrier for controlling diabetes.

Biocatalytic control over the stiffness of pH-responsive hydrogels is applied to develop shape-memory, self-healing and controlled release matrices.