排序方式: 共有45条查询结果,搜索用时 31 毫秒
1.
2.
A capillary electrophoresis (CE) method has been applied for the quantitative determination of alpha(s1)- and alpha(s2)-CN in goat's milk. Several analytical parameters were evaluated showing the reliability of this CE method. Coefficients of determination (R2) greater than 99% were obtained and determination limits of 1.23 and 0.98 mg/ml were achieved for alpha(s1)- and alpha(s2)-CN, respectively. The analytical parameters studied in terms of accuracy, precision and recovery were within acceptable limits. Among 18 samples of 4 different genotypes (BB, EE, BF and FF) for alpha(s1)-CN were analysed, different amounts were obtained from the genotypes. 相似文献
3.
García Falcón S González Amigo S Lage Yusty MA López de Alda Villaizán MJ Simal Lozano J 《Talanta》1996,43(4):659-664
We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method. 相似文献
4.
Surface tensions (sigma) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol] and excess molar volumes (v(E)) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol] at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The magnitude of these experimental quantities is discussed in terms of the nature and type of intermolecular interactions in binary mixtures. In order to analyze the surface tension behavior, the extended Langmuir (EL) model was used and the results obtained for the systems containing 1,3-dioxolane were compared with those of other formerly published series: [1,4-dioxane+alkanes] and [1,4-dioxane+alcohols]. 相似文献
5.
Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL 总被引:3,自引:0,他引:3
González Amigo S García Falcón MS Lage Yusty MA Simal Lozano J 《Fresenius' Journal of Analytical Chemistry》2000,367(6):572-578
An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90-115%) and RSD % (< or =7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples. 相似文献
6.
Desktop flatbed scanners are very well-known devices that can provide digitized information of flat surfaces. They are practically present in most laboratories as a part of the computer support. Several quality levels can be found in the market, but all of them can be considered as tools with a high performance and low cost. The present paper shows how the information obtained with a scanner, from a flat surface, can be used with fine results for exploratory and quantitative purposes through image analysis. It provides cheap analytical measurements for assessment of quality parameters of coated metallic surfaces and monitoring of electrochemical coating bath lives. The samples used were steel sheets nickel-plated in an electrodeposition bath. The quality of the final deposit depends on the bath conditions and, especially, on the concentration of the additives in the bath. Some additives become degraded with the bath life and so is the quality of the plate finish. Analysis of the scanner images can be used to follow the evolution of the metal deposit and the concentration of additives in the bath. Principal component analysis (PCA) is applied to find significant differences in the coating of sheets, to find directions of maximum variability and to identify odd samples. The results found are favorably compared with those obtained by means of specular reflectance (SR), which is here used as a reference technique. Also the concentration of additives SPB and SA-1 along a nickel bath life can be followed using image data handled with algorithms such as partial least squares (PLS) regression and support vector regression (SVR). The quantitative results obtained with these and other algorithms are compared. All this opens new qualitative and quantitative possibilities to flatbed scanners. 相似文献
7.
Josefina Viades-Trejo Alfredo Amigo J. Gracia-Fadrique 《Fluid Phase Equilibria》2006,250(1-2):158-164
A new alternative is presented for activity coefficients at infinite dilution determination via surface tension data of low vapour pressure substances. It was found that experimental data for surfactants follows Volmer's surface equation of state behaviour over the diluted region until the critical micelle concentration. The key operations are: the choice of the same standard conditions for the bulk and the surface phases, the combination of Gibbs and Volmer equations and the use of the symmetric activity coefficients convention. An exact relation between the activity coefficient at infinite dilution and the reciprocal of the critical micelle mole fraction was found which allowed us the verification of the model. 相似文献
8.
Dynamic surface tensions, σ(t) for aqueous solutions of nonyl phenol ethoxylates (NPEOs) at the temperature 298.15 K were measured using a Lauda drop volume tensiometer. The non-ionic surfactants analyzed in this work were Tergitol NP-9, NP-35 and NP-40. By using the classical Ward and Torday equation, the diffusion coefficient for each bulk surfactant concentration was calculated. The equilibrium surface tension values were determined by extrapolating the dynamic surface tension to t → ∞ on the σ(t) vs. t−1/2 curves. These values were used to determine the critical micelle concentrations (CMC) of the surfactant aqueous solutions as well as to calculate the infinite dilution activity coefficient of the surfactant, following a model that combines the Volmer surface equation of state and the Gibbs adsorption equation. 相似文献
9.
Near Infrared Chemical Imaging (NIR-CI) is demonstrating an increasing interest in pharmaceutical research since it meets the challenging analytical needs of pharmaceutical quality and may serve as a versatile adjunct to conventional NIR spectroscopy in many fields.The direct analysis of samples by using hyperspectral imaging techniques, which provide a NIR spectrum in each pixel of the image, generates a big amount of information from one sample. Focusing the interest in pharmaceutical research, several chemometric algorithms are demonstrating their usefulness extracting the relevant information (i.e. quantitative determination of the component in one sample) in tablets with only one sample and without damaging it.In this work, a quantitative method to analyze different commercial Acetylsalicylic acid tablets is proposed by using Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) method to the hyperspectral image and without any previous calibration model. For this purpose, a large concentration range of active pharmaceutical ingredient (ASA, Acetylsalicylic acid in this work), between 82% and 12%, was covered depending on the manufacturer. MCR-ALS allowed obtaining a concentration maps for acetylsalicylic acid and therefore, consequent analysis of the ASA distribution in the tablet was developed by using the histograms of the distribution of concentration.Results certified the good distribution of ASA despite the different origins of the tablets. Moreover, the obtained values of concentration showed a very good concordance with the nominal value of ASA. As a matter of fact, the quality of the results demonstrated the useful of encompassing NIR-CI techniques with MCR-ALS and, consequently, the well development on the production of Acetylsalicylic acid tablets. 相似文献
10.
Effect of beta-lactoglobulin hydrolysis with thermolysin under denaturing temperatures on the release of bioactive peptides 总被引:1,自引:0,他引:1
In this study, bovine beta-lactoglobulin A (beta-Lg A) was hydrolysed with thermolysin under non-denaturing and heat-denaturing conditions. The peptides released during hydrolysis were identified by HPLC-MS/MS. A total of 25 peptides were identified in the hydrolysate obtained at 37 degrees C for 5 min. Some of these peptides survived to further proteolysis even at higher incubation temperatures. Furthermore, novel cleavage sites localised in the most buried zones of beta-Lg and available for thermolysin were recognised when the incubation temperature increased in the range between 60 and 80 degrees C. Three new peptides, LDA, LKPTPEGD, and LQKW, appeared after 30 min hydrolysis at these incubation temperatures, but they were not identified in the 30-min hydrolysates obtained at 37 and 50 degrees C. Of special interest was the peptide LQKW, corresponding to the fragment f(58-61) that had been previously described as a potent angiotensin-converting enzyme-inhibitor (IC50 value of 34.7 microM). 相似文献