Efficacy of incorporating PCMs into the commercial wall on the energy-saving annual thermal analysis

Journal of Thermal Analysis and Calorimetry - In this study, the efficacy of incorporating phase change material (PCM) into the building walls on the annual heat transfer reduction is examined....     

Dual Gold‐Catalyzed Cycloaromatization of Unconjugated (E)‐Enediynes

A synthesis of unconjugated (E)‐enediynes from allenyl amino alcohols is reported and their gold‐catalyzed cascade cycloaromatization to a broad range of enantioenriched substituted isoindolinones has been developed. Experimental and computational studies support the reaction proceeding via a dual‐gold σ,π‐activation mode, involving a key gold‐vinylidene‐ and allenyl‐gold‐containing intermediate.     

Lithium‐Salt‐Containing High‐Molecular‐Weight Polystyrene‐block‐Polyethylene Oxide Block Copolymer Films

Ionic conductivity in relation to the morphology of lithium‐doped high‐molecular‐weight polystyrene‐block‐polyethylene oxide (PS‐b‐PEO) diblock copolymer films was investigated as solid‐state membranes for lithium‐ion batteries. The tendency of the polyethylene (PEO) block to crystallize was highly suppressed by increasing both the salt‐doping level and the temperature. The PEO crystallites completely vanished at a salt‐doping ratio of Li/EO>0.08, at which the PEO segments were hindered from entering the crystalline unit of the PEO chain. A kinetically trapped lamella morphology of PS‐b‐PEO was observed, due to PEO crystallization. The increase in the lamella spacing with increasing salt concentration was attributed to the conformation of the PEO chain rather than the volume contribution of the salt or the previously reported increase in the effective interaction parameter. Upon loading the salt, the PEO chains changed from a compact/highly folded conformation to an amorphous/expanded‐like conformation. The ionic conductivity was enhanced by amorphization of PEO and thereby the mobility of the PEO blocks increased upon increasing the salt‐doping level.     

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.     

Determination trace amounts of thallium after separation and preconcentration onto nanoclay loaded with 1-(2-pyridylazo)-2-naphthol as a new sorbent

A procedure has been proposed for the separation and preconcentration of trace amounts of thallium. It is based on the adsorption of thallium ions onto organo nanoclay loaded with 1-(2-pyridylazo)-2-naphthol (PAN). Thallium ions were quantitatively retained on the column in the pH range of 3.5–6.0, whereas quantitative desorption occurs with 5.0?mL of 5% ascorbic acid and thallium was determined by flame atomic absorption spectrometry. Linearity was maintained between 0.66?ng?mL^?1–15.0?µg?mL^?1?in initial solution. Detection limit was 0.2?ng?mL^?1?in initial solution and preconcentration factor was 150. Eight replicate determinations of 2.0?µg?mL^?1 of thallium in final solution gave a relative standard deviation of ±1.48%. Various parameters have been studied, such as the effect of pH, breakthrough volume and interference of a large number of anions and cations and the proposed method was used to determine thallium ions in water and standard samples. Determination of thallium ions in standard sample showed that the proposed method has good accuracy.     

Constructal multi-scale structure of PCM-based heat sinks

This paper inquires the effectiveness of a PCM-based heat sink as a reliable solution to portable electronic devices. This sink is composed of a PCM with low thermal conductivity and fins to boost its conductivity. The optimization is subjected to fixed heat sink volume filled with PCM between vertical equidistant fins. New fins are installed in the unheated space existing in each enclosure which is not involved in thermal distribution from vertical fins to the PCM. Based on the same principle, new fins generations are augmented stepwise to the multi-scale structure. The steps of adding fins will continue up to the point that the objective function reaches its maximal value, i.e., maximizing the longest safe operation time without allowing the electronics to reach the critical temperature. The results indicate that in each length of the enclosure, the optimum volume fraction and the best fins distance values exist in which the heat sink performance becomes maximum, and adding more fins lowers the performance of the heat sink. Increasing the enclosure’s length by \(2^{n}\) does not change them. For an enclosure with constant length, the optimal number of steps for adding fins within the enclosure is a function of the fin thickness. The results indicate that increasing the thickness changes the optimal number of adding fins inside the enclosure (normally a decrease). As the fin thickness is lowered, there will be a higher effect by adding vertical fins in the enclosure. Numerical simulations cover the Rayleigh number range \(2\times 10^{5}\le \hbox {Ra}_{\mathrm{H}} \le 2.7\times 10^{8}\), where H is the heat sink height.     

Trichosides A and B,new withanolide glucosides from Tricholepis eburnea

Trichosides A (1) and B (2), new withanolide glucosides, have been isolated from the n-butanolic fraction of the 75% methanolic extract of aerial parts of Tricholepis eburnea. Their structures were elucidated through spectroscopic analysis including ESI-MS, 2D NMR and acid hydrolysis.     

EM-Wave Diffraction by a Finite Plate with Dirichlet Conditions in the Ionosphere of Cold Plasma

In the current communication, the problem of plane wave diffraction by a conductible plate of finite length in the presence of cold plasma is investigated. The boundary-value problem corresponding to this model is formulated by Fourier transform which then leads to the Wiener?Hopf equation. The resulting equation has been solved by the Wiener?Hopf procedure in a standard way. The separated field (diffracted field) is analyzed in an anisotropic medium using asymptotic expansion and modified stationary phase method. The problem can be made simple by assuming ε₂→0, where ε₂ is the element of permittivity tensor. This happens, if the operating frequency is assumed to be very large as compared to ω_c (cyclotron frequency) while it is of same order of ω_p (the plasma frequency). The case ε₁ =1, ε₂→0 leads to the results for soft plate of finite length in an isotropic medium. Graphical study is performed to investigate the behavior of separated field for various physical parameters for isotropic and anisotropic media.     

Synthesis and reactions of hydroxyspiro[5.2]cyclooctenones based on the cyclization of the dianions of acetone and diethyl 2-oxopropylphosphonate with 1,1-diacylcyclopropanes

The cyclization of the dianions of diethyl 2-oxopropylphosphonate and of acetone with 1,1-diacylopropanes afforded hydroxyspiro[5.2]cyclooctenones which were transformed, by homo-Michael reactions with tetrabutylammonium halides, into various functionalized phenols or their dimers.