Two new divalent copper (C1) and zinc (C2) chelates having the formulae [M(PIMC)2] (where M = Cu(II), Zn(II) and PIMC = Ligand [(E)-3-(((3-hydroxypyridin-2-yl)imino)methyl)-4H-chromen-4-one] were obtained and characterized by several techniques. Structures and geometries of the synthesized complexes were judged based on the results of alternative analytical and spectral tools supporting the proposed formulae. IR spectral data confirmed the coordination of the ligands to the copper and zinc centers as monobasic tridentate in the enol form. Thermal analysis, UV-Vis spectra and magnetic moment confirmed the geometry around the copper center to be tetrahedral, square pyramidal and octahedral. Study of the binding ability of the synthesized compounds with Circulating tumor DNA (CT-DNA) bas been evaluated applying UV-Vis spectral titration and viscosity measurements. The copper and zinc oxides were achieved from the copper and zinc nano-particles structures Schiff base complexes as the raw material after calcination for 5 hr at 600°C. On the other hand, synthesized of C1 and C2 NPs were used as suitable precursors to the preparation of CuO and ZnO NPs. Finally, the synthesized of the two complexes exhibited enhanced activity against the tested bacterial (Staphylococcus aureus and Escherichia Coli) and fungal strains (Candida albicans and Aspergillus fumigatus) as compared to HPIMC. Among all these synthesized compounds, C1 exhibits good cleaving ability compared to other newly synthesized C2. 相似文献
In this work, oil palm empty fruit bunch (EFB) and jute fibers were treated with 2-hydroxy ethyl acrylate (2-HEA) to improve interfacial bonding of oil palm EFB and jute fibers with epoxy matrix. Hybrid composites were fabricated by incorporation of modified oil palm EFB and jute fibers into an epoxy matrix by the hand lay-up technique. Mechanical (flexural and impact) and morphological properties of modified hybrid composites were measured. Results indicated that flexural and impact properties of modified fiber–reinforced hybrid composites improved as compared to untreated hybrid composites due to better fiber/matrix interfacial bonding, which was confirmed by scanning electron microscopy. We confirmed that treated oil palm/jute hybrid composite may be fabricated by advanced techniques such as resin transfer molding, extrusion, and injection molding for industrial applications in the automotive sector. 相似文献
Natural and accelerated weathering tests were performed to inspect the effect of antioxidants on low-density polyethylene (LDPE) films used as greenhouse covering materials. The LDPE pellets were extruded and blown into a film using a twin-screw extruder and film blowing machine, respectively. The film with 0.2 wt.% Alkanox-240 (AN-0.2) stabilizer showed the highest tensile strength (11 MPa) among all samples during 90 days of natural as well as accelerated weathering. The elastic modulus of the film with 0.5 wt.% of Good-rite (GR-0.5) increased after weathering from approximately 91.8 to 138.9 MPa, and showed the best performance. Morphological images of the neat LDPE film during weathering showed some cracks and grooves, while those of stabilized films showed fewer cracks. Moreover, the estimation of the rapidity of the accelerated method compared to the natural one was approximately nine times faster in Riyadh during the summer season (June–August). The present study suggests that the addition of antioxidants can improve the tensile strength, stability, and, hence, the effectiveness of these films. The best antioxidants were found to be 0.2 wt.% Alkanox and 0.5 wt.% Good-rite antioxidants. 相似文献
An ultra high performance liquid chromatography‐tandem mass spectrometric method has been developed for the highly sensitive and selective determination of regulated aflatoxins. The extraction of aflatoxins from baby food matrices were performed using liquid–liquid extraction procedure followed by immunoaffinity column cleanup. The higher sensitivity for the determination of target aflatoxins was fulfilled by applying a preconcentration step with immunoaffinity columns after acetonitrile–water extraction. The enhanced selectivity was attained with the triple quadrupole mass analyzer operated in electrospray positive ionization mode. Method validation was tested in five different baby food matrices by recovery experiments. Satisfactory recoveries, between 92 and 103%, with relative standard deviations lower than 8% were achieved in all the tested matrices. The proposed method was found to be specific as no interference peaks were observed for blank samples. The limit of detection of the method was found to be in the range of 0.003–0.008 ng/mL. The validated method was fruitfully applied to the screening of aflatoxins in baby foods and feeds sample retailed in local markets of Riyadh, Saudi Arabia. The obtained levels of all analyzed aflatoxins were below the regulation limits set by European Agency. 相似文献
A novel sensitive fluorimetric method was investigated for the assay of fexofenadine hydrochloride (FEX) using silver nanoparticles (NPs) as a fluorescence probe. The NPs, which were prepared by chemical reduction of silver nitrate with sodium borohydride (reducing agent) in aqueous solution (without organic stabilizers) were water soluble, stable and had narrow emission band. The addition of drug to NPs solution caused considerable quenching of the emission band of silver NPs, which was likely due to the complexation of the drug to silver NPs. Under the optimum conditions, the quenched fluorescence (FL) intensity was linear with the concentration of FEX in the range of 1 × 10?7 to 2.5 × 10?5 mol L?1 (0.9985) with a detection limit of 1.2 × 10?8 mol L?1. The quenching mechanism of the studied drug on the emission band of silver NPs was explained by Stern–Volmer law. The developed method was applied to FEX determination in a pharmaceutical formulation (allegra tablets) and biological fluids (human serum and urine). 相似文献
Zirconium oxide (ZrO2) is acquiring considerable attention of most of the research groups and leading to a large number of publications due to its unique properties, especially in the context of emerging trends in the third generation of solar cell research. ZrO2 films offer magnificent aspects related to physicochemical properties, and the properties are found to be dependent on synthesis methods. In the present review, various deposition techniques used to grow zirconium oxide thin films and their application to enhance the quantum efficiency of titanium oxide (TiO2) based dye-sensitized solar cells (DSSCs) are discussed. Also, the modulated performances of DSSCs fabricated by growing the conformal ZrO2 insulating films to retard interfacial recombination dynamics on preformed TiO2 films are discussed.
Engineering the size, composition, and morphology of platinum‐based nanomaterials can provide a great opportunity to improve the utilization efficiency of electrocatalysts and reinforce their electrochemical performances. Herein, three‐dimensional platinum–palladium hollow nanospheres with a dendritic shell (PtPd‐HNSs) are successfully fabricated through a facile and economic route, during which SiO2 microspheres act as the hard template for the globular cavity, whereas the triblock copolymer F127 contributes to the formation of the dendritic shell. In contrast with platinum hollow nanospheres (Pt‐HNSs) and commercial platinum on carbon (Pt/C) catalyst, the novel architecture shows a remarkable activity and durability toward the methanol oxidation reaction (MOR) owing to the coupled merits of bimetallic nanodendrites and a hollow interior. As a proof of concept, this strategy is also extended to trimetallic gold–palladium–platinum hollow nanospheres (AuPdPt‐HNSs), which paves the way towards the controlled synthesis of other bi‐ or multimetallic platinum‐based hollow electrocatalysts. 相似文献
It is a continuous chase of researchers to separate chiral racemates due to their dominance in the pharmaceutical industry, agrochemicals, and food additives. There are many analytical techniques which have been used to resolve one chiral center racemates, but, little the literature report is scanty for the resolution of multiple stereogenic center racemates. Therefore, in this article the efforts were made to describe the enantiomeric resolution of multiple stereogenic center racemates by different modalities of chromatography. The various modalities discussed are high-performance liquid chromatography, capillary electrophoretic chromatography, miceller electrokinetic chromatography, supercritical fluid chromatography, nanoliquid chromatography, and gas chromatography. Besides, the attempts have also been made to discuss the future challenges and prospectives of the enantiomeric resolution of multichiral racemates. 相似文献
Bromate is a byproduct formed as a result of disinfection of bromide-containing source water with ozone or hypochlorite. The International Agency for Research on Cancer has recognized bromate as a possible human carcinogen, thus it is essential to determine in drinking water. Present work highlights a development of sensitive and fast analytical method for bromate determination in drinking water by using ultraperformance liquid chromatography-tandem mass spectrometry. The quality parameters of the developed method were established, obtaining very low limit of detection (0.01 ng/mL), repeatability and reproducibility have been found to be less than 3% in terms of relative standard deviation when analyzing a bromate standard at 0.05 μg/mL with 0.4 min analysis time. Developed method was applied for the analysis of metropolitan and bottled water from Saudi Arabia; 22 samples have been analyzed. Bromate was detected in the metropolitan water samples (from desalinization source) at concentrations ranging between 3.43 and 75.04 ng/mL and in the bottled water samples at concentrations ranging between 2.07 and 21.90 ng/mL. Moreover, in comparison to established analytical methods such as liquid chromatography-tandem mass spectrometry, the proposed method was found to be very sensitive, selective and rapid for the routine analysis of bromate at low level in drinking water. 相似文献